Hallo, ich habe meinen vmhost:~ # scanimage -L device `hp:libusb:003:004' is a Hewlett-Packard ScanJet 5200C flatbed scanner eingerichtet und er fängt auch an sich zu bewegen. Nur bekomme ich IO Fehler, die ich mir nicht erklären kann. Der Scanner ist getestet und funktionierte an meinem Mac mit dem TWAIN SANE Treiber und Gimp. Auf dem Linux Server sieht es nach einem Scann Versuch vom Mac so aus: vmhost:~ # sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x13d3 [TWINHAN], product=0x3206 [VP-7045]) at libusb:005:004 found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x0401 [HP ScanJet 5200C]) at libusb:001:003 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. vmhost:~ # scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Was passiert da ? Wer kann mir helfen ? Danke Lothar -- | Rapid Prototyping | XSLT Codegeneration | http://www.lollisoft.de Lothar Behrens Heinrich-Scheufelen-Platz 2 73252 Lenningen -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org