Am Dienstag, 20. Januar 2009 01:22:26 schrieb David Haller: Hallo David, Ich habe in der Zwischenzeit die 1. primäre IDE-Partition neu partitioniert und neu installiert. /boot ist nun ext3 und nicht mehr Reiser. Vorweg, brachte auch nichts, auch eine Installation des Systems auf die 1. SATA-HD (sda) bringt ähnliche Fehlermeldungen. Die Installation lief mit "Bauchweh" durch. Ich kann mich danach aber als User anmelden. Von der Installation mit der 1. PATA-HD. Bei der Installation, beim 1. Hochfahren sah ich ata1.00: qc timeout (cmd 0xec) ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata1: SATA link up 1.4Gbps (SStatus 113 SControl 300) ata1: link is slow to respond, please be patient (ready=0) ata1: SRST failed (errno=-16) ... ata1: reset failed, giving up Bei Bedarf habe ich Fotos vom Bildschirm. Die Meldungen wiederholen sich, bei ata2 genauso. Nach dem 1. Reboot bleibt es bei "stage 2" hängen. Ich habe nur bei den 3 u.a. Paritionen einen Mountpoint bei der Installation angegeben, die anderen Partitionen wurden nicht eingehängt. fdisk -l Platte /dev/sda: 123.5 GByte, 123522416640 Byte 255 Köpfe, 63 Sektoren/Spuren, 15017 Zylinder Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes Disk identifier: 0x1aff1afe Gerät boot. Anfang Ende Blöcke Id System /dev/sda1 * 2 13 96390 83 Linux /dev/sda2 14 153 1124550 82 Linux Swap / Solaris /dev/sda3 154 2241 16771860 83 Linux Interessant, die PATA-HD ist diesmal sda. df -hT Dateisystem Typ Größe Benut Verf Ben% Eingehängt auf /dev/sda3 xfs 16G 3,2G 13G 20% / udev tmpfs 247M 196K 247M 1% /dev /dev/sda1 ext3 92M 19M 68M 22% /boot
Welche Grub-Optionen könnte ich probieren?
Zeige erstmal die aktuelle Konfiguration (/boot/grub/menu.lst, /boot/grub/device.map, /etc/grub.conf). Und am besten noch die letzte von Lilo ;)
cat /boot/grub/menu.lst # Modified by YaST2. Last modification on Di Jan 20 11:29:37 UTC 2009 default 0 timeout 8 ##YaST - generic_mbr gfxmenu (hd0,0)/message ##YaST - activate ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 11.1 - 2.6.27.7-9 root (hd0,0) kernel /vmlinuz-2.6.27.7-9-pae root=/dev/disk/by-id/ata- IC35L120AVV207-1_VNVD07G4C7BJ7L-part3 resume=/dev/disk/by-id/ata- IC35L120AVV207-1_VNVD07G4C7BJ7L-part2 splash=silent showopts vga=0x317 initrd /initrd-2.6.27.7-9-pae ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 11.1 - 2.6.27.7-9 root (hd0,0) kernel /vmlinuz-2.6.27.7-9-pae root=/dev/disk/by-id/ata- IC35L120AVV207-1_VNVD07G4C7BJ7L-part3 showopts ide=nodma apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x317 initrd /initrd-2.6.27.7-9-pae ###Don't change this comment - YaST2 identifier: Original name: floppy### title Diskette rootnoverify (fd0) chainloader +1 cat /boot/grub/device.map (hd1) /dev/disk/by-id/ata-Hitachi_HDT725040VLAT80_VF1300R3C15RPB (hd0) /dev/disk/by-id/ata-IC35L120AVV207-1_VNVD07G4C7BJ7L (hd4) /dev/disk/by-id/usb-WDC_WD10_EADS-00L5B1_DCA452561108-0:0 (hd3) /dev/disk/by-id/ata-WDC_WD10EADS-00L5B1_WD-WCAU45279723 (fd0) /dev/fd0 (hd2) /dev/disk/by-id/ata-Maxtor_6B200M0_B40G2KRH cat /etc/grub.conf setup --stage2=/boot/grub/stage2 --force-lba (hd0,0) (hd0,0) quit Diese lilo.conf hat früher funktioniert. Im Vergleich zu jetzt dieselbe HD, aber andere Partitonen für /boot und /. # Modified by YaST2. Last modification on Sa Okt 25 00:17:19 CEST 2008 menu-scheme = Wb:kw:Wb:Wb timeout = 80 lba32 change-rules reset read-only prompt default = Linux message = /boot/message boot = /dev/sdc image = /boot/vmlinuz-2.6.22.18-0.2-default ###Don't change this comment - YaST2 identifier: Original name: linux### label = Linux append = " resume=/dev/sdc13 splash=silent showopts" vga = 0x31a initrd = /boot/initrd-2.6.22.18-0.2-default root = /dev/disk/by-id/scsi-SATA_IC35L120AVV207-_VNVD07G4C7BJ7L-part6 image = /boot/vmlinuz-2.6.22.18-0.2-default ###Don't change this comment - YaST2 identifier: Original name: failsafe### label = FailsafeV1 append = "showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3" vga = 0x31a initrd = /boot/initrd-2.6.22.18-0.2-default root = /dev/disk/by-id/scsi-SATA_IC35L120AVV207-_VNVD07G4C7BJ7L-part6
Und da du mir sowieso noch ein paar Sachen per PM mailen wolltest...
Bitte kurzen Kommentar, ob du das Mail hast. Zeit siehe nebenan. Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org