Hallo Liste, seit einigen Tagen friert opensuse für einige Zeit ein (System wie in Kennung unten). Habe gedacht, Kontact würde da in Verbindung mit Java Probleme machen. Also habe ich versucht KDE wieder auf die offizielle Update-Repo Version downzugraden. Dabei ging gar nichts mehr. Im Runlevel 3 konnte ich dann Yast aufrufen und alle Pakete neu installiert. Im Moment läufts, ich bekomme aber beim booten folgende Meldung zu hauf: ata3.00: ...... Kennt das jemand oder was ist das? Daniel <3>ata3.00: exception Emask 0x10 SAct 0xe03df SErr 0x300000 action 0x2 frozen <3>ata3.00: irq_stat 0x08000000 , <interface fatal error> <3>ata3.00: cmd 60/10:00:d6:61:99/00:00:02:00:00/40 tag 0 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/00:08:5e:ce:3b/02:00:02:00:00/40 tag 1 cdb 0x0 data 262144 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:10:ee:61:99/00:00:02:00:00/40 tag 2 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:18:06:62:99/00:00:02:00:00/40 tag 3 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/08:20:1e:62:99/00:00:02:00:00/40 tag 4 cdb 0x0 data 4096 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:30:2e:61:99/00:00:02:00:00/40 tag 6 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:38:46:61:99/00:00:02:00:00/40 tag 7 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:40:5e:61:99/00:00:02:00:00/40 tag 8 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:48:76:61:99/00:00:02:00:00/40 tag 9 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:88:8e:61:99/00:00:02:00:00/40 tag 17 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:90:a6:61:99/00:00:02:00:00/40 tag 18 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/10:98:be:61:99/00:00:02:00:00/40 tag 19 cdb 0x0 data 8192 in <4> res 40/00:20:1e:62:99/00:00:02:00:00/40 Emask 0x10 (ATA bus error) <6>ata3: hard resetting link <5>scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 <5>sd 6:0:0:0: [sdc] Attached SCSI removable disk <5>sd 6:0:0:0: Attached scsi generic sg3 type 0 <5>scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 <5>sd 6:0:0:1: [sdd] Attached SCSI removable disk <5>sd 6:0:0:1: Attached scsi generic sg4 type 0 <5>scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 <5>sd 6:0:0:2: [sde] Attached SCSI removable disk <5>sd 6:0:0:2: Attached scsi generic sg5 type 0 <5>scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 <5>sd 6:0:0:3: [sdf] Attached SCSI removable disk <5>sd 6:0:0:3: Attached scsi generic sg6 type 0 <7>usb-storage: device scan complete <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata3.00: configured for UDMA/133 <6>ata3: EH complete <5>sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB) <5>sd 2:0:0:0: [sdb] Write Protect is off <7>sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 <5>sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <4>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 <6>ACPI: PCI Interrupt 0000:00:07.0[B] -> Link [LAZA] -> GSI 20 (level, low) -> IRQ 20 <7>PCI: Setting latency timer of device 0000:00:07.0 to 64 <6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... <7>ALSA sound/pci/hda/hda_codec.c:2333: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) <7>ALSA sound/pci/hda/hda_codec.c:2337: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:2341: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) <7>ALSA sound/pci/hda/hda_codec.c:2349: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 <6>ath_rate_sample: 1.2 (0.9.3.3) <4>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps <4>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps <4>wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps <4>wifi0: H/W encryption support: WEP AES AES_CCM TKIP <4>wifi0: mac 7.9 phy 4.5 radio 5.6 <4>wifi0: Use hw queue 1 for WME_AC_BE traffic <4>wifi0: Use hw queue 0 for WME_AC_BK traffic <4>wifi0: Use hw queue 2 for WME_AC_VI traffic <4>wifi0: Use hw queue 3 for WME_AC_VO traffic <4>wifi0: Use hw queue 8 for CAB traffic <4>wifi0: Use hw queue 9 for beacons <6>wifi0: Atheros 5212: mem=0xf9ef0000, irq=18 <4>ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17 <6>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 (level, low) -> IRQ 17 <7>PCI: Setting latency timer of device 0000:04:00.0 to 64 <4>NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.12 Thu Jul 17 18:10:24 PDT 2008 <6>Adding 2104472k swap on /dev/sdb1. Priority:-1 extents:1 across:2104472k <6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com <3>ata3.00: exception Emask 0x10 SAct 0x3f SErr 0x300000 action 0x2 frozen <3>ata3.00: irq_stat 0x08000000 , <interface fatal error> <3>ata3.00: cmd 60/01:00:c9:4a:00/00:00:03:00:00/40 tag 0 cdb 0x0 data 512 in <4> res 40/00:20:4a:4b:00/00:00:03:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/01:08:c9:4b:00/00:00:03:00:00/40 tag 1 cdb 0x0 data 512 in <4> res 40/00:20:4a:4b:00/00:00:03:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/80:10:ca:4b:00/00:00:03:00:00/40 tag 2 cdb 0x0 data 65536 in <4> res 40/00:20:4a:4b:00/00:00:03:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/80:18:ca:4a:00/00:00:03:00:00/40 tag 3 cdb 0x0 data 65536 in <4> res 40/00:20:4a:4b:00/00:00:03:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/7f:20:4a:4b:00/00:00:03:00:00/40 tag 4 cdb 0x0 data 65024 in <4> res 40/00:20:4a:4b:00/00:00:03:00:00/40 Emask 0x10 (ATA bus error) <3>ata3.00: cmd 60/7f:28:4a:4c:00/00:00:03:00:00/40 tag 5 cdb 0x0 data 65024 in <4> res 40/00:20:4a:4b:00/00:00:03:00:00/40 Emask 0x10 (ATA bus error) <6>ata3: hard resetting link <6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) <6>ata3.00: configured for UDMA/133 <6>ata3: EH complete -- Betriebssystem: Linux 2.6.22.18-0.2-default x86_64 System: openSUSE 10.3 (x86_64) KDE: 3.5.9 "release 65.2 -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org