Mailinglist Archive: opensuse-de (1212 mails)

< Previous Next >
Re: USB geht nicht
  • From: Andreas Tallowitz <at@xxxxxxxxxxxxxxxxxxxxxxxxx>
  • Date: Sun, 29 Jun 2008 08:04:51 +0200
  • Message-id: <200806290804.51324.at@xxxxxxxxxxxxxxxxxxxxxxxxx>
Am Samstag, 28. Juni 2008 22:29:54 schrieb Hugo Mahr:
On Saturday 28 June 2008 20:47:50 Andreas Tallowitz wrote:
Am Samstag, 28. Juni 2008 18:47:04 schrieb Hugo Mahr:
Halo Andreas,

On Saturday 28 June 2008 09:13:42 Andreas Tallowitz wrote:
Guten Morgen,

wenn ich meine Kamera einstecke bekomme ich folgende Meldung. Die
Kamera wird erkannt und wenn ich sie dann in Konqueror öffne bekomme
ich folgende Fehlermeldung Lesen der Datei nicht möglich. (siehe
Bild).

Ok - ich benutze digikam. Konqueror habe ich noch nicht dafür benutzt.

USB-Sticks werden überhaupt nicht erkannt.

Ich habe Opensuse 11.0 KDE3 und alle Updates.

Ich habe 11.0 und KDE4.
Usb Stick kein Problem-

Mein message log fuer die Kamera:
Jun 28 22:07:22 linux-gowd kernel: usb 2-8.4.1.7: new high speed USB device
using ehci_hcd and address 16
Jun 28 22:07:22 linux-gowd kernel: usb 2-8.4.1.7: configuration #1 chosen
from 1 choice
Jun 28 22:07:22 linux-gowd kernel: usb 2-8.4.1.7: New USB device found,
idVendor=04a9, idProduct=311c
Jun 28 22:07:22 linux-gowd kernel: usb 2-8.4.1.7: New USB device strings:
Mfr=1, Product=2, SerialNumber=0
Jun 28 22:07:22 linux-gowd kernel: usb 2-8.4.1.7: Product: Canon Digital
Camera
Jun 28 22:07:22 linux-gowd kernel: usb 2-8.4.1.7: Manufacturer: Canon Inc.
Jun 28 22:09:22 linux-gowd kernel: usb 2-8.4.1.7: USB disconnect, address
16 Jun 28 22:09:50 linux-gowd kernel: usb 2-3: new high speed USB device
using ehci_hcd and address 17
Jun 28 22:09:50 linux-gowd kernel: usb 2-3: configuration #1 chosen from 1
choice
Jun 28 22:09:50 linux-gowd kernel: usb 2-3: New USB device found,
idVendor=04a9, idProduct=311c
Jun 28 22:09:50 linux-gowd kernel: usb 2-3: New USB device strings: Mfr=1,
Product=2, SerialNumber=0
Jun 28 22:09:50 linux-gowd kernel: usb 2-3: Product: Canon Digital Camera
Jun 28 22:09:50 linux-gowd kernel: usb 2-3: Manufacturer: Canon Inc.


Ich habe gerade einen USB Stick eingesteckt und bekomme folgende Meldung
(unten I/O error)

usb 1-7: new high speed USB device using ehci_hcd and address 3
usb 1-7: unable to read config index 0 descriptor/all
usb 1-7: can't read configurations, error -71
usb 1-7: new high speed USB device using ehci_hcd and address 4
usb 1-7: device descriptor read/all, error -71
usb 1-7: new high speed USB device using ehci_hcd and address 5
usb 1-7: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb 1-7: New USB device found, idVendor=090c, idProduct=1000
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: USB DISK
usb 1-7: Manufacturer: SMI Corporation
usb 1-7: SerialNumber: AA04012900007460
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 7:0:0:0: Direct-Access Sharkoon Flexi-Drive EC1 1100 PQ: 0 ANSI: 0
CCS
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/all, error -71
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 1-7: reset high speed USB device using ehci_hcd and address 5
sd 7:0:0:0: [sdc] 1957888 512-byte hardware sectors (1002 MB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sd 7:0:0:0: [sdc] 1957888 512-byte hardware sectors (1002 MB)
usb 1-7: reset high speed USB device using ehci_hcd and address 5
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sdc] Assuming drive cache: write through
sdc:<6>usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/64, error -71
usb 1-7: device descriptor read/64, error -32
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/64, error -71
usb 1-7: device descriptor read/64, error -71
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/64, error -71
usb 1-7: device descriptor read/64, error -71
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/64, error -71
usb 1-7: device descriptor read/64, error -71
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/64, error -71
usb 1-7: device descriptor read/64, error -71
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device not accepting address 5, error -71
usb 1-7: reset high speed USB device using ehci_hcd and address 5
sd 7:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdc, sector 0
printk: 1 messages suppressed.
Buffer I/O error on device sdc, logical block 0
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/64, error -71
usb 1-7: device descriptor read/64, error -71
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: reset high speed USB device using ehci_hcd and address 5
usb 1-7: device descriptor read/all, error -71
sd 7:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sdc, sector 0
Buffer I/O error on device sdc, logical block 0
usb 1-7: USB disconnect, address 5
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O
K
end_request: I/O error, dev sdc, sector 0
Buffer I/O error on device sdc, logical block 0
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O
K
end_request: I/O error, dev sdc, sector 0
ldm_validate_partition_table(): Disk read failed.
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O
K
end_request: I/O error, dev sdc, sector 0
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O
K
end_request: I/O error, dev sdc, sector 0
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O
K
end_request: I/O error, dev sdc, sector 0
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O

K
end_request: I/O error, dev sdc, sector 0
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O

K
end_request: I/O error, dev sdc, sector 0
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O

K
end_request: I/O error, dev sdc, sector 24
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O

K
end_request: I/O error, dev sdc, sector 24
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O

K
end_request: I/O error, dev sdc, sector 0
sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK,SUGGEST_O

K
end_request: I/O error, dev sdc, sector 0
unable to read partition table
sd 7:0:0:0: [sdc] Attached SCSI removable disk
sd 7:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete




--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe@xxxxxxxxxxxx
Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken
Sie eine Mail an: opensuse-de+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups