Mailinglist Archive: opensuse-de (1478 mails)

< Previous Next >
System bootet nicht mehr
  • From: Joachim Hussong <suse2@xxxxxxxxxxx>
  • Date: Sun, 03 Feb 2008 13:10:41 +0100
  • Message-id: <47A5AF41.1030504@xxxxxxxxxxx>
Hallo,

nachdem ich mit Mühen meine 10.3 auf einem Rechner von 1996 zum Laufen brachte, bootet jetzt das System nicht mehr. Es könnte was mit dem letzten Kernelupdate zu tun haben. Doch scheint bei den anderen das System hochzukommen. Meins bootet zwar eigentlich durch, doch kann sich keiner anmelden, da keinerlei User bekannt sind.

Ich habe die boot.msg gekürzt und füge sie unten ein. Ich hoffe, sie gibt was her. Zur Not kann ich auch die ganze Datei posten, doch ich denke aus den Zeilen unten sollte grob herauszulesen sein, was das Problem ist.

Zunächst dachte ich an einen Hardwaredefekt, doch das parallel installiert Windows XP läuft.

Wie krieg ich das System wieder hoch? Einen älteren Kernel einspielen scheitert, da ich mich nicht einloggen kann und vom Rettungssystem aus, weiss ich nicht, wie es geht. SuSE bietet auch eine Reparartur von der InstallationsDVD an, doch das bringt mich nicht weiter, denn wähle ich den Punkt aus, bootet der Rechner neu. Beim Neuboot erkenne ich keine Unterschiede und alles endet entweder im kaputten System oder wieder an dem Punkt, wo die Rarparatur YAST starten will und neu bootet. Und wieder mal grüßt das Bootmurmel!

Gruß

Joachim

Inspecting /boot/System.map-2.6.22.16-0.1-default
Loaded 26157 symbols from /boot/System.map-2.6.22.16-0.1-default.
Symbols match kernel version 2.6.22.
No module symbols loaded - kernel modules not enabled.

klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.22.16-0.1-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2008/01/23 14:28:52 UTC
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<6>found SMP MP-table at 000f4c70
<7>Entering add_active_range(0, 0, 131056) 0 entries of 256 used

<6>Time: tsc clocksource has been installed.
<4>ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread DFFDEAB0 could not acquire Mutex [3] [20070126]
<6>pnp: 00:07: iomem range 0x0-0x9ffff could not be reserved
<6>pnp: 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved
<6>pnp: 00:07: iomem range 0xfec00000-0xfec0ffff could not be reserved
<6>pnp: 00:07: iomem range 0xfee00000-0xfee0ffff could not be reserved
<6>pnp: 00:08: iomem range 0xf0000-0xf3fff could not be reserved
<6>pnp: 00:08: iomem range 0xf4000-0xf7fff could not be reserved
<6>pnp: 00:08: iomem range 0xf8000-0xfbfff could not be reserved
<6>pnp: 00:08: iomem range 0xfc000-0xfffff could not be reserved
<6>PCI: Bridge: 0000:00:01.0
<6> IO window: disabled.
<6> MEM window: disabled.
<6> PREFETCH window: disabled.

Kernel logging (ksyslog) stopped.

Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Sun Feb 3 12:30:23 2008

FATAL: Error inserting processor (/lib/modules/2.6.22.16-0.1-default/kernel/drivers/acpi/processor.ko): No such device
WARNING: Error inserting processor (/lib/modules/2.6.22.16-0.1-default/kernel/drivers/acpi/processor.ko): No such device
FATAL: Error inserting thermal (/lib/modules/2.6.22.16-0.1-default/kernel/drivers/acpi/thermal.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting fan (/lib/modules/2.6.22.16-0.1-default/kernel/drivers/acpi/fan.ko): No such device
Creating device nodes with udev
1 logical volume(s) in volume group "vg_system" now active
1 logical volume(s) in volume group "vg_system" now active
resume device not found (ignoring)
Waiting for device /dev/vg_system/lv_system to appear: ok
fsck 1.40.2 (12-Jul-2007)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/vg_system/lv_system
/dev/vg_system/lv_system: clean, 194594/1966080 files, 1122844/3932160 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/vg_system/lv_system

Boot logging started on /dev/tty1(/dev/console (deleted)) at Sun Feb 3 13:30:28 2008

Starting udevd udevd[959]: lookup_group: specified group 'audio' unknown

udevd[959]: lookup_group: specified group 'audio' unknown
udevd[959]: lookup_group: specified group 'tty' unknown
udevd[959]: lookup_group: specified group 'uucp' unknown
udevd[959]: lookup_group: specified group 'video' unknown
udevd[959]: lookup_group: specified group 'lp' unknown
udevd[959]: lookup_group: specified group 'video' unknown
udevd[959]: lookup_group: specified group 'kmem' unknown
udevd[959]: lookup_group: specified group 'video' unknown
udevd[959]: lookup_group: specified group 'disk' unknown
udevd[959]: lookup_group: specified group 'lp' unknown

udevd-event[1453]: node_symlink: device node '/dev/rtc0' already exists, link '/dev/rtc' will not overwrite it

done
Loading required kernel modules

doneActivating swap-devices in /etc/fstab...
donemount: according to mtab, /dev/mapper/vg_system-lv_system is already mounted on /

Activating device mapper...
done

/dev/mapper/vg_home-lv_home on /home type ext3 (rw)
donechown: `root:tty': invalid user
chown: `root:root': invalid user

Mounting securityfs on /sys/kernel/security done
Loading AppArmor module done
Loading AppArmor profiles <notice>killproc: kill(948,29)
Creating /var/log/boot.msg
donedone
Setting up the hardware clockdone
Activating remaining swap-devices in /etc/fstab...
doneConfiguring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneSetting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Setting up hostname 'Cecile'done
Setting up loopback interface lo lo IP address: 127.0.0.1/8 Checking for network time protocol daemon (NTPD): unused
Can't determine current runlevel
done
System Boot Control: The system has been set up
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(948,3)

INIT: Entering runlevel: 3

Boot logging started on /dev/tty1(/dev/console) at Sun Feb 3 12:30:38 2008

Master Resource Control: previous runlevel: N, switching to runlevel: 3
Starting D-Bus daemonCould not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry

Unknown username "root" in message bus configuration file
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry

Unknown username "gdm" in message bus configuration file
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry


Unknown username "avahi" in message bus configuration file
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry


Unknown group "avahi" in message bus configuration file
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry

Unknown username "haldaemon" in message bus configuration file
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry

Unknown username "0" in message bus configuration file
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry

Failed to start message bus: Could not get UID and GID for username "messagebus"
failed
<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=ext3 TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 apm=off ide=nodma REDIRECT=/dev/tty1 COLUMNS=80 PATH=/bin:/usr/bin:/sbin:/usr/sbin RUNLEVEL=3 PWD=/ SPLASHCFG= edd=off PREVLEVEL=N LINES=25 SHLVL=2 HOME=/ SPLASH=no ROOTFS_BLKDEV=/dev/vg_system/lv_system _=/sbin/startproc DAEMON=/sbin/resmgrd ]
Initializing random number generatordone


--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe@xxxxxxxxxxxx
Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken
Sie eine Mail an: opensuse-de+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups