Kasimir Müller wrote:
Am 19.12.2007 13:28, Christian Kuehn schrieb:
Moin,
bevor ich einen Bug melde wollte ich kurz horchen, ob dieses Problem schon anderweitig aufgetaucht ist.....
Ein frisches System mit 10.3 (i586) hat neben 2 IDE-Platten auch einen zusätzlichen SATA-Controller SATA 300 TX2plus mit 2 Platten SAMSUNG HD403LJ
Jetzt tauchen im Log und per dmesg massenhaft folgende Meldungen auf:
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Hallo Christian, ist bei mir das gleiche allerdings mit einem sil24-Kontroller. Und zwar sowohl unter 32bit wie 64bit-System. Ich habe ausführlich mit dem Entwickler konferiert, er hält es für einen Hardware-Fehler (sterbende Platten). smart sagt aber, daß die Platten gesund sind. Ich habe ebenfalls Samsung-Platten (verschiedene Grössen). Ich wollte mit zu Weihnachten mal eine Platte eines anderen Herstellers reinmachen und schauen. Hast Du die Möglichkeit, eine Platte eines anderen Herstellers einzubauen ? Meine persönliche Meinung ist, dass es was mit IRQ-Timeouts zu tun haben könnte. Bisher habe ich noch keinen Datenverlust bemerkt. Alle Files sind mit md5-Sumen versehen und werden täglich gecheckt.
Hi Kasimir, das ist bei einem produktiven System schon problematisch. Zumal diese Meldung bei beiden Platten auftaucht, die Platten gerade mal 3 Wochen alt sind und diese Fehler m.E. erst mit 10.3 aufgetreten sind. Und nur noch mal zur Klärung: * Kein VMWARE * SATA2-Kontroller im PCI-Slot * 2 Samsung-Platten SATA2 Komischerweise downgraded der Treiber ja auch von 3G auf 1,5G, denn beim Boot startet der Treiber mit: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7 ata3.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32) ata3.00: configured for UDMA/133 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7 ata4.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 0/32) ata4.00: configured for UDMA/133 um dann irgendwann runterzugehen: ata4: limiting SATA link speed to 1.5 Gbps ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata4.00: port_status 0x20080000 ata4.00: cmd c8/00:78:cf:3b:f0/00:00:00:00:00/ef tag 0 cdb 0x0 data 61440 in res 50/00:00:46:3c:f0/00:00:0f:00:00/ef Emask 0x2 (HSM violation) ata4: hard resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/133 ata4: EH pending after completion, repeating EH (cnt=4) ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb ata4: hotplug_status 0x20 ata4: soft resetting link ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata4.00: configured for UDMA/133 ata4: EH complete bzw. ata3: limiting SATA link speed to 1.5 Gbps ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 ata3.00: port_status 0x20080000 ata3.00: cmd c8/00:88:bf:60:aa/00:00:00:00:00/ed tag 0 cdb 0x0 data 69632 in res 50/00:00:46:61:aa/00:00:2a:00:00/ed Emask 0x2 (HSM violation) ata3: hard resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: EH pending after completion, repeating EH (cnt=4) ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xb ata3: hotplug_status 0x10 ata3: soft resetting link ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata3.00: configured for UDMA/133 ata3: EH complete Komisch. Oder? Grüße Christian -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org