Hallo Liste, ich war lange nicht mehr hier .. ;o) Ich habe mir einen Laptop zugelegt und versuche zur Zeit eine wireless-Verbindung zu meinem Accespoint huinzukriegen. Unter W2k klappt das schon, aber LINUX sollte das natürlich auch hinbekommen , oder ? Meine Konfiguration : Suse 9.2 , Kernel 2.6.21.5 #11 PREEMPT (vanilla) Wirelesstools : iwlist Wireless-Tools version 28 Compatible with Wireless Extension v11 to v20. Kernel Currently compiled with Wireless Extension v22. wlan0 Recommend Wireless Extension v9 or later, Currently compiled with Wireless Extension v22. (Hmm, sollte ich auf eine niedrigere Version downgraden, obwohl der Fehler bei bisher allen Versionen auftritt ?) wpa_supplicant v0.5.8 Hier mal die Ausgabe von iwlist wlan0 scan : wlan0 Scan completed : Cell 01 - egal Cell 02 - egal Cell 03 - Address: 00:15:0C:C7:AB:49 ESSID:"HRWLAN" IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (1) : TKIP Authentication Suites (1) : PSK Cell3 ist mein Netz .... sieht doch gut aus, oder ? Hier mal meine wpa-supplicant-Konfdatei : ctrl_interface=/var/run/wpa_supplicant eapol_version=1 ap_scan=1 network={ ssid="HRWLAN" key_mgmt=WPA-PSK proto=WPA pairwise=TKIP group=TKIP psk="geheim" <--- Stimmt ganz bestimmt aber "geheim" ist's natürlich nicht :o) } So, nun zu dem was bei der Geschichte rauskommt : lappi:/usr/local/sbin/wpa_supplicant -Dwext -iwlan0 \ -c /opt/make/fritz/mywpa.conf -d .. ergibt folgendes : Der Kernel sagt : Jul 9 10:11:21 lappi kernel: IW_AUTH_80211_AUTH_ALGSuccess. Jul 9 10:11:21 lappi kernel: Success. Jul 9 10:11:21 lappi kernel: IW_AUTH_WPA_VERSION Jul 9 10:11:21 lappi kernel: Success. Jul 9 10:11:21 lappi kernel: IW_AUTH_CIPHER_GROUP Jul 9 10:11:21 lappi kernel: Success. Jul 9 10:11:21 lappi kernel: IW_AUTH_CIPHER_GROUP Jul 9 10:11:21 lappi kernel: Success. Jul 9 10:11:21 lappi kernel: IW_AUTH_KEY_MGMT Jul 9 10:11:21 lappi kernel: Success. Jul 9 10:11:21 lappi last message repeated 2 times Jul 9 10:11:34 lappi kernel: IW_AUTH_80211_AUTH_ALGSuccess. usw usw ... ... und so geht's dann weiter ... Die Logausgabe von wpa_supplicant : Initializing interface 'wlan0' conf '/opt/make/fritz/mywpa.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/opt/make/fritz/mywpa.conf' -> '/opt/make/fritz/mywpa.conf' Reading configuration file '/opt/make/fritz/mywpa.conf' ctrl_interface='/var/run/wpa_supplicant' eapol_version=1 ap_scan=1 Priority group 0 id=0 ssid='HRWLAN' Initializing interface (2) 'wlan0' EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 SIOCGIWRANGE: WE(compiled)=22 WE(source)=9 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:04:0e:ca:dc:9b wpa_driver_wext_set_wpa wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_countermeasures wpa_driver_wext_set_drop_unencrypted Setting scan request: 0 sec 100000 usec Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received 182 bytes of scan results (3 BSSes) Scan results: 3 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: EGAL 1: 00:15:0c:c7:ab:49 ssid='HRWLAN' wpa_ie_len=26 rsn_ie_len=0 caps=0x0 selected based on WPA IE selected WPA AP 00:15:0c:c7:ab:49 ssid='HRWLAN' Try to find non-WPA AP Trying to associate with 00:15:0c:c7:ab:49 (SSID='HRWLAN' freq=0 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 WPA: using IEEE 802.11i/D3.0 WPA: Selected cipher suites: group 8 pairwise 8 key_mgmt 2 proto 1 WPA: set AP WPA IE - hexdump(len=26): dd 18 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 00 00 WPA: clearing AP RSN IE WPA: using GTK TKIP WPA: using PTK TKIP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2 02 01 00 00 50 f2 02 01 00 00 50 f2 02 No keys have been configured - skip key clearing wpa_driver_wext_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_wext_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) Wireless event: cmd=0x8b06 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP]) Wireless event: cmd=0x8b1a len=14 Authentication with 00:00:00:00:00:00 timed out. Added BSSID 00:15:0c:c7:ab:49 into blacklist No keys have been configured - skip key clearing State: ASSOCIATING -> DISCONNECTED wpa_driver_wext_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Scan timeout - try to get results Received 182 bytes of scan results (3 BSSes) Scan results: 3 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: EGAL 1: 00:15:0c:c7:ab:49 ssid='HRWLAN' wpa_ie_len=26 rsn_ie_len=0 caps=0x0 selected based on WPA IE selected WPA AP 00:15:0c:c7:ab:49 ssid='HRWLAN' .. und so weiter .... Ihr seht, es geht irgendwie nicht weiter .. die Verbindung kommt nicht zustande ... So, ich habe natürlich 'ne Menge gegoogelt und in der Liste geforscht, aber als Wireless/WPA-Neuling komme ich jetz nicht mehr weiter und bräuchte mal etwas Hilfe :o) Was fällt euch dazu ein ? Grüße Harry -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org