Hallo Liste, seit gestern habe ich das Problem, dass die Netzwerkarte beim Booten nicht mehr erkannt wird. Zuerst habe ich an einen Defekt der Karte gedacht, aber nachdem ich zwei unterschiedliche Karten erfolgreich mit Windows XP getestet hab, glaube ich nicht an einen Hardwaredefekt. Der Rechner bootet ganz normal, nur die Installation der Netzwerkarte geht schief, Was habe ich bisher versucht? 1. Verschiedene Karten. Einmal eine 3com PCI Steckkarte, dabei die Onboardkarte deaktiviert. Dann die 3com wieder ausgebaut und die Onboard (eine VIA VT6102 [Rhine II]) im BIOS aktiviert. Beide Karten funktionieren mit Windows, aber nicht mit Linux. 2. Über Yast die Netzwerkkarte konfiguriert. Das geht ohne Probleme. Alle Daten werden korrekt angezeigt. Und beim Speichern gibt es auch keine Probleme. 3. Über Menü "Software installieren oder löschen" nach Ungereimtheiten gesucht, aber auf die schnelle nichts gefunden. 4. Öfters mal neu gestartet, aber davon war ich eigentlich nicht überzeugt. Ich bin echt ratlos. Ich hoffe, irgendjemand da draussen kann mir helfen. Im "Infozentrum" unter dem Menüpunkt "Netzwerk-Schnittstellen" ist nichts eingetragen. Vielleicht noch interessant, ich verwende nicht den Networkmanager, sondern ifup. Aber auch das hat schon vorher funktioniert. Zum System: openSUSE 10.2 32 bit KDE 3.5.7 realease 10.1 Kernel 2.6.18.8-0.3-default Sollten noch Fragen offen sein, bitte mailen. Am Schluß ist noch die Boot,log. Danke fürs Lesen und Gruß Manfred Inspecting /boot/System.map-2.6.18.8-0.3-default Loaded 23388 symbols from /boot/System.map-2.6.18.8-0.3-default. Symbols match kernel version 2.6.18. No module symbols loaded - kernel modules not enabled. klogd 1.4.1, log source = ksyslog started. <5>Linux version 2.6.18.8-0.3-default (geeko@buildhost) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #1 SMP Tue Apr 17 08:42:35 UTC 2007 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) <4> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) <4> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>127MB HIGHMEM available. <5>896MB LOWMEM available. <6>found SMP MP-table at 000f5510 <7>On node 0 totalpages: 262128 <7> DMA zone: 4096 pages, LIFO batch:0 <7> Normal zone: 225280 pages, LIFO batch:31 <7> HighMem zone: 32752 pages, LIFO batch:7 <6>DMI 2.2 present. <6>Using APIC driver default <6>IO/L-APIC allowed because system is MP or new enough <7>ACPI: RSDP (v000 VKT400 ) @ 0x000f6ff0 <7>ACPI: RSDT (v001 VKT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 <7>ACPI: FADT (v001 VKT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 <7>ACPI: MADT (v001 VKT400 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff6ec0 <7>ACPI: DSDT (v001 VKT400 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000 <6>ACPI: PM-Timer IO Port: 0x4008 <7>ACPI: Local APIC address 0xfee00000 <6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) <4>Processor #0 6:10 APIC version 16 <6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) <4>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) <7>ACPI: IRQ0 used by override. <7>ACPI: IRQ2 used by override. <7>ACPI: IRQ9 used by override. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <6>Using ACPI (MADT) for SMP configuration information <4>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) <4>Detected 2002.632 MHz processor. <4>Built 1 zonelists. Total pages: 262128 <5>Kernel command line: root=/dev/hda6 vga=0x317 resume=/dev/hdb1 splash=verbose elevator= <6>bootsplash: verbose mode. <7>mapped APIC to ffffd000 (fee00000) <7>mapped IOAPIC to ffffc000 (fec00000) <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Initializing CPU#0 <4>PID hash table entries: 4096 (order: 12, 16384 bytes) <4>Console: colour dummy device 80x25 <4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Memory: 1032388k/1048512k available (1697k kernel code, 15376k reserved, 972k data, 196k init, 131008k highmem) <4>Checking if this processor honours the WP bit even in supervisor mode... Ok. <4>Calibrating delay using timer specific routine.. 4008.91 BogoMIPS (lpj=8017833) <6>Security Framework v1.0.0 initialized <4>Mount-cache hash table entries: 512 <7>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 <7>CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <7>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <4>Compat vDSO mapped to ffffe000. <6>Checking 'hlt' instruction... OK. <6>SMP alternatives: switching to UP code <6>Freeing SMP alternatives: 16k freed <6>checking if image is initramfs... it is <6>Freeing initrd memory: 3054k freed <6>ACPI: Core revision 20060707 <4>CPU0: AMD Athlon(tm) stepping 00 <6>Total of 1 processors activated (4008.91 BogoMIPS). <4>ENABLING IO-APIC IRQs <6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>Brought up 1 CPUs <4>migration_cost=0 <6>NET: Registered protocol family 16 <6>ACPI: bus type pci registered <6>PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1 <6>PCI: Using configuration type 1 <4>Setting up standard PCI resources <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: PCI Root Bridge [PCI0] (0000:00) <7>PCI: Probing PCI hardware (bus 00) <6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 <4>PCI quirk: region 4000-407f claimed by vt8235 PM <4>PCI quirk: region 5000-500f claimed by vt8235 SMB <7>Boot video device is 0000:01:00.0 <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. <4>ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. <4>ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. <4>ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. <6>Linux Plug and Play Support v0.97 (c) Adam Belay <6>pnp: PnP ACPI init <6>pnp: PnP ACPI: found 12 devices <6>PnPBIOS: Disabled by ACPI PNP <6>PCI: Using ACPI for IRQ routing <6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report <6>PCI: Bridge: 0000:00:01.0 <6> IO window: disabled. <6> MEM window: e8000000-e9ffffff <6> PREFETCH window: d0000000-dfffffff <7>PCI: Setting latency timer of device 0000:00:01.0 to 64 <6>NET: Registered protocol family 2 <4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes) <4>TCP established hash table entries: 131072 (order: 8, 1048576 bytes) <4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes) <6>TCP: Hash tables configured (established 131072 bind 65536) <6>TCP reno registered <6>Machine check exception polling timer started. <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) <5>apm: overridden by ACPI. <6>audit: initializing netlink socket (disabled) <5>audit(1180706061.736:1): initialized <4>highmem bounce pool size: 64 pages <4>Total HugeTLB memory allocated, 0 <5>VFS: Disk quotas dquot_6.5.1 <4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) <6>Initializing Cryptographic API <6>io scheduler noop registered <6>io scheduler anticipatory registered <6>io scheduler deadline registered <6>io scheduler cfq registered (default) <6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 6144k, total 262144k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=1 <6>vesafb: protected mode interface info at c000:e650 <6>vesafb: pmi: set display start = c00ce686, set palette = c00ce6f0 <6>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da <6>vesafb: scrolling: redraw <6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <4>Console: switching to colour frame buffer device 128x48 <6>fb0: VESA VGA frame buffer device <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Real Time Clock Driver v1.12ac <6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled <6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <6>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <6>Floppy drive(s): fd0 is 1.44M, fd1 is 1.2M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>PNP: No PS/2 controller found. Probing ports directly. <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>mice: PS/2 mouse device common for all mice <6>input: PC Speaker as /class/input/input0 <6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: bitmap version 4.39 <6>NET: Registered protocol family 1 <4>Using IPI No-Shortcut mode <6>ACPI: (supports S0 S1 S4 S5) <6>Freeing unused kernel memory: 196k freed <6>Time: tsc clocksource has been installed. <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <5>SCSI subsystem initialized <6>dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 <6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 169 <6>dc395x: Used settings: AdapterID=07, Speed=0(20.0MHz), dev_mode=0x37 <6>dc395x: AdaptMode=0x0f, Tags=4(16), DelayReset=1s <6>dc395x: (Wide) Connectors: ext50 Termination: Auto Low High <6>dc395x: Performing initial SCSI bus reset <6>scsi0 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 v2.05, 2004/03/08 <5> Vendor: SCANNER Model: Rev: 2.02 <5> Type: Scanner ANSI SCSI revision: 01 CCS <5>scsi 0:0:6:0: Attached scsi generic sg0 type 6 <6>VP_IDE: IDE controller at PCI slot 0000:00:11.1 <4>ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 <4>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 <6>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 177 <6>PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 1 <6>VP_IDE: chipset revision 6 <6>VP_IDE: not 100% native mode: will probe irqs later <6>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 <6> ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA <7>Probing IDE interface ide0... <4>hda: SAMSUNG SP1604N, ATA DISK drive <4>hdb: SAMSUNG SP1604N, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <6>hda: max request size: 512KiB <6>hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(133) <6>hda: cache flushes supported <6> hda: hda1 hda2 < hda5 hda6 hda7 > <6>hdb: max request size: 512KiB <6>hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100) <6>hdb: cache flushes supported <6> hdb: hdb1 hdb2 < hdb5 hdb6 > <7>Probing IDE interface ide1... <4>hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive <4>hdd: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <6>ACPI: Fan [FAN] (on) <6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found <4>Attempting manual resume <5>ReiserFS: hda6: found reiserfs format "3.6" with standard journal <5>ReiserFS: hda6: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: hda6: checking transaction log (hda6) <5>ReiserFS: hda6: Using r5 hash to sort names <6>parport: PnPBIOS parport detected. <6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] <6>parport0: Printer, Hewlett-Packard HP LaserJet 1100 <6>lp0: using parport0 (interrupt-driven). <6>NET: Registered protocol family 23 <6>usbcore: registered new driver usbfs <6>usbcore: registered new driver hub <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>Linux agpgart interface v0.101 (c) Dave Jones <6>via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker <4>ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 <4>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 <6>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 185 <6>eth0: VIA Rhine II at 0x1e800, 00:30:1b:2b:d0:86, IRQ 185. <6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. <4>ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 <4>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 <6>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 193 <6>PCI: VIA IRQ fixup for 0000:00:10.3, from 5 to 1 <6>ehci_hcd 0000:00:10.3: EHCI Host Controller <6>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 <6>ehci_hcd 0000:00:10.3: irq 193, io mem 0xea011000 <6>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 <6>usb usb1: new device found, idVendor=0000, idProduct=0000 <6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb1: Product: EHCI Host Controller <6>usb usb1: Manufacturer: Linux 2.6.18.8-0.3-default ehci_hcd <6>usb usb1: SerialNumber: 0000:00:10.3 <6>usb usb1: configuration #1 chosen from 1 choice <6>hub 1-0:1.0: USB hub found <6>hub 1-0:1.0: 6 ports detected <6>USB Universal Host Controller Interface driver v3.0 <6>agpgart: Detected VIA KT400/KT400A/KT600 chipset <6>agpgart: AGP aperture is 128M @ 0xe0000000 <6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 193 <6>PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 1 <6>uhci_hcd 0000:00:10.0: UHCI Host Controller <6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 <6>uhci_hcd 0000:00:10.0: irq 193, io base 0x0000d800 <6>usb usb2: new device found, idVendor=0000, idProduct=0000 <6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb2: Product: UHCI Host Controller <6>usb usb2: Manufacturer: Linux 2.6.18.8-0.3-default uhci_hcd <6>usb usb2: SerialNumber: 0000:00:10.0 <6>usb usb2: configuration #1 chosen from 1 choice <6>hub 2-0:1.0: USB hub found <6>hub 2-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 193 <6>PCI: VIA IRQ fixup for 0000:00:10.1, from 11 to 1 <6>uhci_hcd 0000:00:10.1: UHCI Host Controller <6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 <6>uhci_hcd 0000:00:10.1: irq 193, io base 0x0000dc00 <6>usb usb3: new device found, idVendor=0000, idProduct=0000 <6>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb3: Product: UHCI Host Controller <6>usb usb3: Manufacturer: Linux 2.6.18.8-0.3-default uhci_hcd <6>usb usb3: SerialNumber: 0000:00:10.1 <6>usb usb3: configuration #1 chosen from 1 choice <6>hub 3-0:1.0: USB hub found <6>hub 3-0:1.0: 2 ports detected <6>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 193 <6>PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1 <6>uhci_hcd 0000:00:10.2: UHCI Host Controller <6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 <6>uhci_hcd 0000:00:10.2: irq 193, io base 0x0000e000 <6>usb usb4: new device found, idVendor=0000, idProduct=0000 <6>usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 <6>usb usb4: Product: UHCI Host Controller <6>usb usb4: Manufacturer: Linux 2.6.18.8-0.3-default uhci_hcd <6>usb usb4: SerialNumber: 0000:00:10.2 <6>usb usb4: configuration #1 chosen from 1 choice <6>hub 4-0:1.0: USB hub found <6>hub 4-0:1.0: 2 ports detected <6>hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.20 <6>hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 <6>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 201 <6>usb 2-1: new full speed USB device using uhci_hcd and address 2 <6>usb 2-1: new device found, idVendor=058f, idProduct=9254 <6>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 2-1: Product: Generic USB Hub <6>usb 2-1: Manufacturer: ALCOR <6>usb 2-1: configuration #1 chosen from 1 choice <6>hub 2-1:1.0: USB hub found <6>hub 2-1:1.0: 4 ports detected <4>nvidia: module license 'NVIDIA' taints kernel. <6>usb 2-2: new low speed USB device using uhci_hcd and address 3 <6>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201 <4>NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9631 Thu Nov 9 17:38:10 PST 2006 <6>usb 2-2: new device found, idVendor=046a, idProduct=0050 <6>usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 2-2: configuration #1 chosen from 1 choice <6>usb 2-1.1: new full speed USB device using uhci_hcd and address 4 <6>usb 2-1.1: new device found, idVendor=0c4b, idProduct=0100 <6>usb 2-1.1: new device strings: Mfr=0, Product=0, SerialNumber=0 <6>usb 2-1.1: configuration #1 chosen from 1 choice <6>usb 2-1.2: new full speed USB device using uhci_hcd and address 5 <6>usb 2-1.2: new device found, idVendor=03f0, idProduct=1104 <6>usb 2-1.2: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 2-1.2: Product: DeskJet 950C <6>usb 2-1.2: Manufacturer: Hewlett-Packard <6>usb 2-1.2: SerialNumber: ES136171NJDF <6>usb 2-1.2: configuration #1 chosen from 1 choice <6>usb 2-1.3: new low speed USB device using uhci_hcd and address 6 <6>usb 2-1.3: new device found, idVendor=046d, idProduct=c506 <6>usb 2-1.3: new device strings: Mfr=1, Product=2, SerialNumber=0 <6>usb 2-1.3: Product: USB Receiver <6>usb 2-1.3: Manufacturer: Logitech <6>usb 2-1.3: configuration #1 chosen from 1 choice <6>usb 2-1.4: new full speed USB device using uhci_hcd and address 7 <6>usb 2-1.4: not running at top speed; connect to a high speed hub <6>usb 2-1.4: new device found, idVendor=05e3, idProduct=0608 <6>usb 2-1.4: new device strings: Mfr=0, Product=1, SerialNumber=0 <6>usb 2-1.4: Product: USB2.0 Hub <6>usb 2-1.4: configuration #1 chosen from 1 choice <6>hub 2-1.4:1.0: USB hub found <6>hub 2-1.4:1.0: 4 ports detected <6>usbcore: registered new driver hiddev <6>usb 2-1.4.1: new full speed USB device using uhci_hcd and address 8 <6>usb 2-1.4.1: new device found, idVendor=057c, idProduct=3800 <6>usb 2-1.4.1: new device strings: Mfr=1, Product=2, SerialNumber=3 <6>usb 2-1.4.1: Product: Bluetooth Device <6>usb 2-1.4.1: Manufacturer: Bluetooth Device <6>usb 2-1.4.1: SerialNumber: 55AE870E0400 <6>usb 2-1.4.1: configuration #1 chosen from 1 choice <6>usbcore: registered new driver usbserial <6>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic <6>drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0 <6>drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1104 <6>usbcore: registered new driver usblp <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver <6>input: HID 046a:0050 as /class/input/input1 <6>input: USB HID v1.11 Keyboard [HID 046a:0050] on usb-0000:00:10.0-2 <6>input: HID 046a:0050 as /class/input/input2 <6>input: USB HID v1.11 Device [HID 046a:0050] on usb-0000:00:10.0-2 <6>input: HID 046a:0050 as /class/input/input3 <6>input: USB HID v1.11 Mouse [HID 046a:0050] on usb-0000:00:10.0-2 <6>input: Logitech USB Receiver as /class/input/input4 <6>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-1.3 <6>usbcore: registered new driver usbserial_generic <6>drivers/usb/serial/usb-serial.c: USB Serial Driver core <6>usbcore: registered new driver usbhid <6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver <6>drivers/usb/serial/usb-serial.c: USB Serial support registered for Reiner SCT Cyberjack USB card reader <6>cyberjack 2-1.1:1.0: Reiner SCT Cyberjack USB card reader converter detected <6>usb 2-1.1: Reiner SCT Cyberjack USB card reader converter now attached to ttyUSB0 <6>usbcore: registered new driver cyberjack <6>drivers/usb/serial/cyberjack.c: v1.01 Matthias Bruestle <6>drivers/usb/serial/cyberjack.c: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver <6>Bluetooth: Core ver 2.10 <6>NET: Registered protocol family 31 <6>Bluetooth: HCI device and connection manager initialized <6>Bluetooth: HCI socket layer initialized <6>Bluetooth: HCI USB driver ver 2.9 <6>usbcore: registered new driver hci_usb <6>Adding 2104472k swap on /dev/hdb1. Priority:42 extents:1 across:2104472k <6>loop: loaded (max 8 devices) <6>kjournald starting. Commit interval 5 seconds <4>EXT3-fs warning: mounting fs with errors, running e2fsck is recommended <6>EXT3 FS on hda5, internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <5>ReiserFS: hdb6: found reiserfs format "3.6" with standard journal <5>ReiserFS: hdb6: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: hdb6: journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: hdb6: checking transaction log (hdb6) <5>ReiserFS: hdb6: Using r5 hash to sort names <5>ReiserFS: hdb5: found reiserfs format "3.6" with standard journal <5>ReiserFS: hdb5: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: hdb5: checking transaction log (hdb5) <5>ReiserFS: hdb5: Using r5 hash to sort names <6>NTFS driver 2.1.27 [Flags: R/W MODULE]. <6>NTFS volume version 3.1. Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Fri Jun 1 13:54:22 2007 Trying manual resume from /dev/hdb1 Creating device nodes with udev Loading ide-core Loading ide-disk Loading scsi_mod Loading sd_mod Loading dc395x Loading via82cxxx Loading fan Loading edd Loading reiserfs Invoking userspace resume from /dev/hdb1 resume: Could not stat configuration file resume: libgcrypt version: 1.2.3 resume: Could not read the image Invoking in-kernel resume from /dev/hdb1 Waiting for device /dev/hda6 to appear: ok fsck 1.39 (29-May-2006) [/bin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/hda6 Reiserfs super block in block 16 on 0x306 of format 3.6 with standard journal Blocks (total/free): 5243200/3837269 by 4096 bytes Filesystem is clean Replaying journal.. Reiserfs journal '/dev/hda6' in blocks [18..8211]: 0 transactions replayed Checking internal tree..finished fsck succeeded. Mounting root device read-write. Mounting root /dev/hda6 Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Jun 1 13:54:34 2007 <notice>boot.udev start Starting udevd udevd-event[1720]: run_program: exec of program '/usr/sbin/alsactl' failed done <notice>'boot.udev start' exits with status 0 <notice>boot.rootfsck start Activating swap-devices in /etc/fstab... done<notice>'boot.rootfsck start' exits with status 0 <notice>boot.loadmodules start Loading required kernel modules done<notice>'boot.loadmodules start' exits with status 0 <notice>boot.preload_early start done <notice>'boot.preload_early start' exits with status 0 <notice>boot.localfs start Checking file systems... fsck 1.39 (29-May-2006) /dev/hda7: clean, 42/26104 files, 13069/104388 blocks Reiserfs super block in block 16 on 0x346 of format 3.6 with standard journal Blocks (total/free): 26214048/8390519 by 4096 bytes Filesystem is clean Replaying journal.. Reiserfs journal '/dev/hdb6' in blocks [18..8211]: 0 transactions replayed Checking internal tree..finished Reiserfs super block in block 16 on 0x345 of format 3.6 with standard journal Blocks (total/free): 5243200/2388873 by 4096 bytes Filesystem is clean Replaying journal.. Reiserfs journal '/dev/hdb5' in blocks [18..8211]: 0 transactions replayed Checking internal tree..finished donedone Mounting local file systems... proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) debugfs on /sys/kernel/debug type debugfs (rw) udev on /dev type tmpfs (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hda7 on /boot type ext2 (rw,acl,user_xattr) /dev/hda5 on /winux type ext3 (rw,noexec,nosuid,nodev,acl,user_xattr) /dev/hdb6 on /home type reiserfs (rw,acl,user_xattr) /dev/hdb5 on /usr type reiserfs (rw,acl,user_xattr) /dev/hda1 on /xp type ntfs (ro,noexec,nosuid,nodev,noatime) done<notice>'boot.localfs start' exits with status 0 <notice>boot.cleanup start Cleaning temporary directories /tmpdone <notice>'boot.cleanup start' exits with status 0 <notice>boot.clock start Setting up the hardware clockdone <notice>'boot.clock start' exits with status 0 <notice>boot.klog start Creating /var/log/boot.msg done<notice>killproc: kill(853,29) <notice>'boot.klog start' exits with status 0 <notice>boot.proc start <notice>'boot.proc start' exits with status 0 <notice>boot.scpm start <notice>'boot.scpm start' exits with status 0 <notice>boot.udev_retry start Retry device configurationdone <notice>'boot.udev_retry start' exits with status 0 <notice>boot.videobios start <notice>'boot.videobios start' exits with status 0 <notice>setserial start Configuring serial ports... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports done<notice>'setserial start' exits with status 0 <notice>boot.isapnp start <notice>'boot.isapnp start' exits with status 0 <notice>boot.localnet start Setting up hostname 'lintop'done Setting up NIS domainname 'desktop.home'done Setting up loopback interface Interface lo is not available failed <notice>'boot.localnet start' exits with status 0 <notice>boot.preload start done <notice>'boot.preload start' exits with status 0 <notice>boot.swap start Activating remaining swap-devices in /etc/fstab... done<notice>'boot.swap start' exits with status 0 <notice>SuSEfirewall2_init start Starting Firewall Initialization (phase 1 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. done <notice>'SuSEfirewall2_init start' exits with status 0 <notice>boot.ldconfig start <notice>'boot.ldconfig start' exits with status 0 <notice>boot.sysctl start Setting current sysctl status from /etc/sysctl.conf net.ipv4.icmp_echo_ignore_broadcasts = 1 net.ipv4.conf.all.rp_filter = 1 done <notice>'boot.sysctl start' exits with status 0 <notice>boot.ipconfig start Enabling syn flood protectiondone Disabling IP forwardingdone Disabling IPv6 forwardingdone Disabling IPv6 privacydone done <notice>'boot.ipconfig start' exits with status 0 System Boot Control: The system has been set up System Boot Control: Running /etc/init.d/boot.local done<notice>killproc: kill(853,3) INIT: Boot logging started on /dev/tty1(/dev/console) at Fri Jun 1 13:55:09 2007 Master Resource Control: previous runlevel: N, switching to runlevel: 5 done Entering runlevel: 5 <notice>startproc: execve (/usr/bin/dbus-daemon) [ /usr/bin/dbus-daemon --system ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/bin/dbus-daemon ] <notice>startproc: execve (/sbin/acpid) [ /sbin/acpid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/acpid ] Starting D-Bus daemondone [acpid]: starting up acpid: loading ACPI modules ( ac battery button processor thermal ) done acpid: will not skip unsupported modules acpid: loading ACPI laptop modules ( ) done Starting acpid done [acpid]: 0 rules loaded <notice>startproc: execve (/sbin/syslog-ng) [ /sbin/syslog-ng -a /var/lib/dhcp/dev/log -a /var/lib/named/dev/log -a /var/lib/ntp/dev/log -a /var/lib/stunnel/dev/log ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/syslog-ng ] <notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 -x -x ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ PREVLEVEL=N LINES=48 HOME=/ SHLVL=2 SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/klogd ] Starting syslog servicesdone <notice>startproc: execve (/usr/bin/eposd) [ /usr/bin/eposd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/bin/eposd ] Starting eposddone Loading keymap i386/qwertz/de-latin1-nodeadkeys.map.gz doneKeyboard: Typematic Rate set to 30.3 cps (delay = 250 ms) doneLoading compose table winkeys shiftctrl latin1.adddone Start Unicode mode doneLoading console font lat9w-16.psfu -m trivial G0:loadable done<notice>startproc: execve (/sbin/resmgrd) [ /sbin/resmgrd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/resmgrd ] Starting resource managerdone <notice>startproc: execve (/usr/sbin/polkitd) [ /usr/sbin/polkitd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/polkitd ] Starting PolicyKit daemondone <notice>startproc: execve (/usr/sbin/hald) [ /usr/sbin/hald --daemon=yes ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/hald ] Starting HAL daemondone Loading CPUFreq modules (CPUFreq not supported) Setting up network interfaces: Interface lo is not available failedInterface eth0 is not available failedSetting up service network . . . . . . . . . . . . . . . .done <notice>startproc: execve (/usr/sbin/hddtemp) [ /usr/sbin/hddtemp -d -f /etc/hddtemp.db -p 7634 /dev/hda /dev/hdb ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/hddtemp ] Starting hddtemp daemon for /dev/hda /dev/hdbdone <notice>startproc: execve (/usr/sbin/snmpd) [ /usr/sbin/snmpd -r -A -LF d /var/log/net-snmpd.log -p /var/run/snmpd.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/snmpd ] Starting snmpddone <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/sbin/portmap ] Starting RPC portmap daemondone Importing Net File System (NFS)unused avmailgate: No such file or directory Checking/updating CPU microcode unused Starting bluetooth: hcid sdpd opd rfcommdone Starting nfsboot (sm-notify) done <notice>startproc: execve (/usr/sbin/ntpd) [ /usr/sbin/ntpd -p /var/lib/ntp/var/run/ntp/ntpd.pid -u ntp -i /var/lib/ntp ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/ntpd ] Try to get initial date and time via NTP from 0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.orgError : Temporary failure in name resolution Error : Temporary failure in name resolution Error : Temporary failure in name resolution failed Starting network time protocol daemon (NTPD)done <notice>startproc: execve (/usr/sbin/lisa) [ /usr/sbin/lisa -c /etc/lisarc ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/lisa ] Starting lan browser daemon for KDEdone <notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] Starting Name Service Cache Daemondone <notice>startproc: execve (/usr/sbin/pcscd) [ /usr/sbin/pcscd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/pcscd ] Starting PC/SC smart card daemon done Starting mail service (Postfix)failed <notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/cron ] Starting CRON daemondone <notice>startproc: execve (/usr/sbin/rsyncd) [ /usr/sbin/rsyncd --daemon ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/rsyncd ] <notice>startproc: execve (/usr/sbin/powersaved) [ /usr/sbin/powersaved -d -f /var/run/acpid.socket -v 3 ], [ HOME=/ PATH=/bin:/usr/bin:/sbin:/usr/sbin SHELL=/bin/sh RUNLEVEL=5 PREVLEVEL=N DAEMON=/usr/sbin/powersaved ] Starting powersaved: done <notice>startproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 QTDIR=/usr/lib/qt3 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 SPLASHCFG= PWD=/ LANG=de_DE.UTF-8 PREVLEVEL=N LINES=48 QT_SYSTEM_DIR=/usr/share/desktop-data HOME=/ SHLVL=2 XCURSOR_THEME=crystalwhite WINDOWMANAGER=/usr/bin/kde LC_CTYPE=de_DE.UTF-8 SPLASH=no splash=verbose ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] Starting service kdmdone <notice>startproc: execve (/usr/sbin/cupsd) [ /usr/sbin/cupsd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/usr/bin/ionice DAEMON=/usr/sbin/cupsd ] Starting cupsddone Starting rsync daemondone <notice>startproc: execve (/usr/sbin/smartd) [ /usr/sbin/smartd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/smartd ] Starting smartd done Starting service MySQL done <notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 TMPDIR=/var/tmp LC_ALL= INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= LANG=de_DE.UTF-8 PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ LC_CTYPE= splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/smbd ] <notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] Starting Samba SMB daemon done Mount CIFS File Systems unused <notice>startproc: execve (/usr/sbin/spamd) [ /usr/sbin/spamd -d -c -L -r /var/run/spamd.pid ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/spamd ] Starting SMPPPDdone <notice>checkproc: /opt/kde3/bin/kdm 3408 Starting spamd failed <notice>startproc: execve (/usr/sbin/xinetd) [ /usr/sbin/xinetd ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/sbin/xinetd ] Starting INET services. (xinetd)done Starting X Font Server<notice>startproc: execve (/usr/bin/xfs) [ /usr/bin/xfs -nodaemon -user nobody -port 7100 ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=128 PATH=/bin:/usr/bin:/sbin:/usr/sbin vga=0x317 RUNLEVEL=5 PWD=/ SPLASHCFG= PREVLEVEL=N LINES=48 SHLVL=2 HOME=/ splash=verbose SPLASH=no ROOTFS_BLKDEV=/dev/hda6 _=/sbin/startproc DAEMON=/usr/bin/xfs ] done <notice>checkproc: /opt/kde3/bin/kdm 3408 Starting Firewall Initialization (phase 2 of 2) SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. SuSEfirewall2: Warning: no interface active done Master Resource Control: runlevel 5 has been reached Failed services in runlevel 5: avmailgate postfix spamd Skipped services in runlevel 5: nfs microcode smbfs <notice>killproc: kill(2463,3) -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org