Mailinglist Archive: opensuse-de (1852 mails)

[Niemand <lists@xxxxxxxxxxxxxxxxxxxxxxx>]

On Tuesday 23 May 2006 09:48, Orlando Rose wrote:
> Hi,

Hi auch,

> folgende Probleme habe ich bei Suse 10.1 (ging bei 10.0 noch super)
>
> 1. USB-DVD-Brenner
>
> var/log/messages beim einschalten:
> ---------------------------------------------------------------------------
>----------------------------------------------------------------------------
>----- May 23 09:43:03 rose kernel: usb 5-6: new high speed USB device using
> ehci_hcd and address 22 May 23 09:43:04 rose kernel: usb 5-6: new device
> found, idVendor=0402, idProduct=5621 May 23 09:43:04 rose kernel: usb 5-6:
> new device strings: Mfr=0, Product=1, SerialNumber=2 May 23 09:43:04 rose
> kernel: usb 5-6: Product: USB 2.0 Storage Device May 23 09:43:04 rose
> kernel: usb 5-6: SerialNumber: 00042222200000073374 May 23 09:43:04 rose
> kernel: usb 5-6: configuration #1 chosen from 1 choice May 23 09:43:04 rose
> kernel: scsi25 : SCSI emulation for USB Mass Storage devices May 23
> 09:43:04 rose kernel: usb-storage: device found at 22
> May 23 09:43:04 rose kernel: usb-storage: waiting for device to settle
> before scanning May 23 09:43:09 rose kernel:   Vendor: HL-DT-ST  Model:
> DVDRAM GSA-4163B  Rev: A102 May 23 09:43:09 rose kernel:   Type:   CD-ROM  
>                           ANSI SCSI revision: 00 May 23 09:43:10 rose
> kernel: sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda
> tray May 23 09:43:10 rose kernel: sr 25:0:0:0: Attached scsi CD-ROM sr0 May
> 23 09:43:10 rose kernel: sr 25:0:0:0: Attached scsi generic sg4 type 5 May
> 23 09:43:10 rose kernel: usb-storage: device scan complete
> ---------------------------------------------------------------------------
>----------------------------------------------------------------------------
>-----
>
> beim einlegen der CD oder DVD kommt kein Automount mehr.
> k3b bricht den Brennevorgang ab als user und root getestet
>
> 2. USB-Platte
>
> kein Automount mehr
>
> var/log/messages beim einschalten:
> ---------------------------------------------------------------------------
>----------------------------------------------------------------------------
>----- May 23 09:46:07 rose kernel: usb 5-5: new high speed USB device using
> ehci_hcd and address 23 May 23 09:46:07 rose kernel: usb 5-5: new device
> found, idVendor=04b4, idProduct=6830 May 23 09:46:07 rose kernel: usb 5-5:
> new device strings: Mfr=56, Product=78, SerialNumber=100 May 23 09:46:07
> rose kernel: usb 5-5: Product: USB2.0 Storage Device May 23 09:46:07 rose
> kernel: usb 5-5: Manufacturer: Cypress Semiconductor May 23 09:46:07 rose
> kernel: usb 5-5: SerialNumber: 600000062892
> May 23 09:46:07 rose kernel: usb 5-5: configuration #1 chosen from 1 choice
> May 23 09:46:07 rose kernel: scsi26 : SCSI emulation for USB Mass Storage
> devices May 23 09:46:07 rose kernel: usb-storage: device found at 23
> May 23 09:46:07 rose kernel: usb-storage: waiting for device to settle
> before scanning May 23 09:46:16 rose kernel:   Vendor: WDC WD32  Model:
> 00JB-00KFA0       Rev:  0 0 May 23 09:46:16 rose kernel:   Type:  
> Direct-Access                      ANSI SCSI revision: 00 May 23 09:46:16
> rose kernel: SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
> May 23 09:46:16 rose kernel: sdd: Write Protect is off
> May 23 09:46:16 rose kernel: sdd: Mode Sense: 33 00 00 00
> May 23 09:46:16 rose kernel: sdd: assuming drive cache: write through
> May 23 09:46:16 rose kernel: SCSI device sdd: 625142448 512-byte hdwr
> sectors (320073 MB) May 23 09:46:16 rose kernel: sdd: Write Protect is off
> May 23 09:46:16 rose kernel: sdd: Mode Sense: 33 00 00 00
> May 23 09:46:16 rose kernel: sdd: assuming drive cache: write through
> May 23 09:46:16 rose kernel:  sdd: sdd1
> May 23 09:46:16 rose kernel: sd 26:0:0:0: Attached scsi disk sdd
> May 23 09:46:16 rose kernel: sd 26:0:0:0: Attached scsi generic sg3 type 0
> May 23 09:46:16 rose kernel: usb-storage: device scan complete
> ---------------------------------------------------------------------------
>----------------------------------------------------------------------------
>-----
>
> Kann mir noch geholfen werden?

hoert sich ganz boese nach einem udev problem an. Wuerde einen Bug eintragen.

Mfg Michael
-- 
Antorten bitte an die Mailingliste

PM's an Niemand_at_tbasnoopy.homelinux.net