Am Donnerstag Dezember 29 2005 14:39 schrieb Al Bogner:
Ich schaffe es nicht ein Nokia 6230 via USB zu verbinden.
hwinfo --usb 10: USB 00.0: 0000 Unclassified device [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_421_40f_noserial_if0_0 SysFS ID: /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0 SysFS BusID: 1-1:1.0 Hardware Class: unknown Model: "Nokia Mobile Phones Nokia 6230" Hotplug: USB Vendor: usb 0x0421 "Nokia Mobile Phones" Device: usb 0x040f "Nokia 6230" Revision: "5.50" Speed: 12 Mbps Module Alias: "usb:v0421p040Fd0550dc02dsc00dp00ic02isc08ip01" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (Hub)
12: USB 00.1: 10200 Modem [Created at usb.122] UDI: /org/freedesktop/Hal/devices/usb_device_421_40f_noserial_if1_serial_unknown _0 SysFS ID: /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.1 SysFS BusID: 1-1:1.1 Hardware Class: modem Model: "Nokia Mobile Phones Nokia 6230" Hotplug: USB Vendor: usb 0x0421 "Nokia Mobile Phones" Device: usb 0x040f "Nokia 6230" Revision: "5.50" Driver: "cdc_acm" Device File: /dev/ttyACM0 Speed: 12 Mbps Module Alias: "usb:v0421p040Fd0550dc02dsc00dp00ic02isc02ip01" Driver Info #0: Driver Status: cdc_acm is active Driver Activation Cmd: "modprobe cdc_acm" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #9 (Hub)
lsusb Bus 005 Device 003: ID 0dda:2001 Integrated Circuit Solution, Inc. Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 0421:040f Nokia Mobile Phones 6230 GSM Phone Bus 001 Device 001: ID 0000:0000
/etc/gnokiirc [global] port = /dev/ttyUSB1 model = 6230 initlength = default connection = dku2 use_locking = no serial_baudrate = 19200 smsc_timeout = 10 [gnokiid] bindir = /usr/sbin/ [connect_script] TELEPHONE = 12345678 [disconnect_script] [logging] debug = off rlpdebug = off xdebug = off
uname -r 2.6.13-15.7-default (SL 10)
Sowohl mit /dev/ttyUSB1 als auch mit /dev/ttyUSB0 will es nicht klappen. Versuche mal /dev/ttyACM0
gnokii --identify GNOKII Version 0.6.8 Gnokii serial_open: open: Keine Berechtigung Couldn't open PHONET device: Keine Berechtigung Telephone interface init failed: Command failed. Quitting.
Wammu stürzt beim Scan ab. Viele Grüße, Heinz Dittmar