Hallo, Liste beim Booten des Servers tauchen nach dem Bonding der Karten manchmal Fehlermeldungen auf. Wenn der Rechner ohne Änderungen neu gestartet wird, sind sie weg. Ich kann keine Regel erkennen, warum das passiert, und was er mir sagen will. Wie gesagt: Hochfahren, Neustart, keine Änderungen, aber unterschiedliche Meldungen! Wenn ich dann ein ifconfig mache, melden in allen Fällen die DSL0 mit der zugehörigen Karte okay, die beiden anderen Karten sagen running slave und das bond0 sagt running master. Alles geht, egal welche Bootmeldung ich bekomme. Hier die, bei der alles okay scheint: doneLoading console font lat9w-16.psfu -m trivial G0:loadable doneSetting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02) eth0 No configuration found for eth0 unused eth1 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) eth1 configuration: eth-id-00:e0:7d:ec:97:4a eth1 IP address: 10.0.1.1/24 done eth2 device: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) eth2 No configuration found for eth2 unused dsl0 done bond0 bond0 enslaving interfaces: eth0 eth2 bond0 IP address: 192.168.136.1/24 as bonding master doneSetting up service network . . . . . . . . . . . . . . . .done <notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D -s /etc/samba/smb.conf ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 Hier die Fehlermeldung: doneStarting mmsmtpdone Setting up network interfaces: lo lo IP address: 127.0.0.1/8 done eth0 device: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) eth0 configuration: eth-id-00:e0:7d:ec:97:4a eth0 IP address: 10.0.1.1/24 done eth1 device: Broadcom Corporation NetXtreme BCM5702X Gigabit Ethernet (rev 02) eth1 No configuration found for eth1 unused eth2 device: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78) eth2 No configuration found for eth2 unused dsl0 done bond0 bond0 enslaving interfaces: eth1 eth2 /bin/logger: invalid option -- e usage: logger [-is] [-f file] [-p pri] [-t tag] [-u socket] [ message ... ] bond0 -e Bonding interface 'bond0' could not be set up correctly Something broke getting the master's IP address: Cannot assign requested address. Something broke getting the master's destination address: Cannot assign requested address. Something broke getting the master's broadcast address: Cannot assign requested address. Something broke getting the master's netmask: Cannot assign requested address. eth1 is already a slave failedSetting up service network . . . . . . . . . . . . . . . .done <notice>startproc: execve (/sbin/portmap) [ /sbin/portmap ], [ CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh Was ist da los? Viele Grüße Bernd Kloss ______________________________________________________________________ XXL-Speicher, PC-Virenschutz, Spartarife & mehr: Nur im WEB.DE Club! Jetzt gratis testen! http://freemail.web.de/home/landingpad/?mc=021130