Hallo zusammen, ich habe mir im Frühjahr obige USB Box für einen Windows Rechner zugelegt. Heute stosse ich in der aktuellen "Linux User" auf einen Artikel über DVB-T mit USB. Neugierig geworden habe ich mich auf linuxtv.org umgesehen und bin auf folgendes gestossen: ------------------------------------------------------------------------------------------ Hybrid (DVB/Analogue) Hybrid devices have a DVB-demodulator and a analogue capturing chip. Normally they share a tuner. [edit] Medion MD97500 (DVB-T) All devices below are fully supported by the LinuxTV driver. The following drivers are needed for these devices: - cx22702.ko - dvb-usb.ko - dvb-usb-cxusb.ko These frontend(s)/demodulator(s) can be found in various revisions of this device: - Conexant CX22702 Comment: The analogue part (handled by a Conexant CX25842) is not supported yet. The cx25840-driver from ivtv can be used to implement support. device/model type firmware name comments/quirks URL/pictures Medion MD 95700 4in1 USB2.0 - The box also has a X10-remote (radio, not IR) included (supported by the atiremote-driver) and a USB2.0 hub (Tetrahub) (one additional USB port). Both of them are working without plugging the power adapter. - ---------------------------------------------------------------------------------------------------- Abgesehen davon, dass sich im ein Zahlendreher befindet (97500 statt 95700 wie es weiter unten richtig heisst) sollte das Gerät unter SuSE 9.3 doch wohl zur Mitarbeit zu bewegen sein. Die Frage ist nur wie? cx22702 lässt sich mittels modprobe einbinden dvb-usb und dvb-usb-cxusb nicht. Der SuSE Plugger findet folgendes unter "Unbekannt": Conexant USB Hybrid Video Capture Die Backends wie kaffeine oder kaxtv finden die Box aber nicht. Wo muss ich noch schrauben? Mal wieder dankbar für jede Hilfe Andreas