Hallo Leute, ich muß Daten von einem Uraltrechner mit SCO-Unix retten. Diskettenlaufwerk tut noch und nach einer ganzen Weile RTFM und Rumprobieren habe ich auch rausbekommen, wie der Mountbefehl geht und daß dieses *nix auch DOS kann. Also eine Diskette hervorgekramt und mit /dev/fd0u1440 unter Linux formatiert. Nu' wird aber seitens des SCO die Partitionstabelle bemängelt. Bis zu diesem Zeitpunkt wußte ich gar nicht, daß es so etwas gibt. Und tatsächlich, mein Linux-fdisk meckert auch (obwohl es sonst die Diskette benutzen kann). Fermat:~ # fdisk -l /dev/fd0 Disk /dev/fd0: 1 MB, 1474560 bytes 2 heads, 18 sectors/track, 80 cylinders Units = cylinders of 36 * 512 = 18432 bytes Disk /dev/fd0 doesn't contain a valid partition table Wie erzeuge ich denn jetzt eine Partitionstabelle auf der Diskette? Bisher habe ich dazu immer die verschiedenen YaST-Varianten verwendet und nur mit fdisk die Einträge ergänzt. Und das alles nur auf Festplatten und auch ziemlich vorsichtig. Bei einer alten Win-Startdiskette existiert tatsächlich so etwas wie eine Partitionstabelle: Disk /dev/fd0: 1 MB, 1474560 bytes 2 heads, 18 sectors/track, 80 cylinders Units = cylinders of 36 * 512 = 18432 bytes Device Boot Start End Blocks Id System /dev/fd0p1 ? 47277740 92542092 814758329+ 74 Unknown Partition 1 has different physical/logical beginnings (non-Linux?): phys=(288, 110, 36) logical=(47277739, 1, 3) Partition 1 has different physical/logical endings: phys=(366, 104, 37) logical=(92542091, 0, 7) Partition 1 does not end on cylinder boundary. /dev/fd0p2 ? 36949561 51921125 269488144 65 Novell Netware 386 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(107, 121, 32) logical=(36949560, 1, 15) Partition 2 has different physical/logical endings: phys=(10, 121, 13) logical=(51921124, 0, 16) Partition 2 does not end on cylinder boundary. /dev/fd0p3 ? 14971928 53815342 699181456 53 OnTrack DM6 Aux3 Partition 3 has different physical/logical beginnings (non-Linux?): phys=(345, 32, 19) logical=(14971927, 1, 2) Partition 3 has different physical/logical endings: phys=(324, 77, 19) logical=(53815341, 1, 9) Partition 3 does not end on cylinder boundary. /dev/fd0p4 ? 108586627 108588442 32669+ bb Boot Wizard hidden Partition 4 has different physical/logical beginnings (non-Linux?): phys=(65, 1, 0) logical=(108586626, 1, 13) Partition 4 has different physical/logical endings: phys=(96, 0, 7) logical=(108588441, 1, 11) Partition 4 does not end on cylinder boundary. Meiner einer staunt. Bootdisketten von SuSE 6.1 und Open-BSD 2.6 wirken dagegen aufgeräumt: Fermat:~ # fdisk -l /dev/fd0 Disk /dev/fd0: 1 MB, 1474560 bytes 2 heads, 18 sectors/track, 80 cylinders Units = cylinders of 36 * 512 = 18432 bytes Kann mir jemand weiterhelfen? Helga -- ## Content Developer OpenOffice.org: lang/DE ## Office-Suite für Linux, Mac, Windows -- http://de.openoffice.org/ ## OpenSource-Werkstatt -- http://www.eschkitai.de/