Hallo Liste, ich habe meine Wlan KArte zum Laufen gebracht, funktioniert auch soweit mit dem Treiber, allerdings bekomme ich keine Verbindung, bzw. wenn ich mit "iwlist wlan0 scan" nach dem AP suche, bekomme ich nur die Rückgabe "Hardware not availabel" Der Treiber, sowohl mit insmod, als auch mit dem start_net script funktioniert, aber es wird noch nach der Datei RADIO16.BIN verlangt, die ich nirgendwo finden konnte. Was mache ich falsch ? Hab' ich einfach was vergessen ? Danke und Gruß an alle maX Bauer -- SET THE CONTROLS FOR THE HEART OF THE SUN Hier die messages: Sep 2 13:40:13 idefix kernel: acx100: It looks like you were coaxed into buying a wireless network card Sep 2 13:40:13 idefix kernel: acx100: that uses the mysterious ACX100 chip from Texas Instruments. Sep 2 13:40:13 idefix kernel: acx100: You should better have bought e.g. a PRISM(R) chipset based card, Sep 2 13:40:13 idefix kernel: acx100: since that would mean REAL vendor Linux support. Sep 2 13:40:13 idefix kernel: acx100: Given this info, it's evident that this driver is quite EXPERIMENTAL, Sep 2 13:40:13 idefix kernel: acx100: thus your mileage may vary. Visit http://acx100.sf.net for support. Sep 2 13:40:13 idefix kernel: acx100_init_module: TI acx_pci.o: Ver 0.2.0pre8 Driver initialized, waiting for cards to probe... Sep 2 13:40:13 idefix kernel: acx100_probe_pci: WARNING: ACX111 support is highly experimental! Sep 2 13:40:13 idefix kernel: Found ACX111-based wireless network card at 00:0b.0, irq:11, phymem1:0xd5000000, phymem2:0xd4800000, mem1:0xd28f0000, mem1_size:8192, mem2:0xd2b1b000, mem2_size:131072. Sep 2 13:40:13 idefix kernel: acx100_probe_pci: using ACX111 io resource addresses (size: 54) Sep 2 13:40:13 idefix kernel: hw_unavailable = 1 Sep 2 13:40:13 idefix kernel: acx_show_card_eeprom_id: EEPROM card ID string check found uninitialised card ID: this is a SpeedStream SS1021 or Gigafast WF721-AEX, no?? Sep 2 13:40:13 idefix kernel: reset hw_unavailable++ Sep 2 13:40:13 idefix kernel: acx100_reset_mac: enable soft reset... Sep 2 13:40:13 idefix kernel: acx100_reset_mac: disable soft reset and go to init mode... Sep 2 13:40:13 idefix kernel: acx100_reset_dev: eCPU do not start after boot (SOR), is this fatal? Sep 2 13:40:13 idefix kernel: Allocated 62772 bytes for firmware module loading. Sep 2 13:40:13 idefix kernel: not using auto increment for firmware loading. Sep 2 13:40:13 idefix kernel: acx100_write_fw: Firmware written. Sep 2 13:40:13 idefix kernel: acx100_write_fw (firmware): 1, acx100_validate_fw: 1 Sep 2 13:40:13 idefix kernel: acx100_reset_mac: enable soft reset... Sep 2 13:40:13 idefix kernel: acx100_reset_mac: disable soft reset and go to init mode... Sep 2 13:40:13 idefix kernel: acx100_reset_dev: configure interrupt mask at d4h to: B9FFh... Sep 2 13:40:13 idefix kernel: acx100_reset_dev: boot up eCPU and wait for complete... Sep 2 13:40:14 idefix kernel: acx100_reset_dev: Received signal that card is ready to be configured :) (the eCPU has woken up) Sep 2 13:40:14 idefix kernel: acx100_reset_dev: Clean up cmd mailbox access area Sep 2 13:40:14 idefix kernel: reset hw_unavailable-- Sep 2 13:40:14 idefix kernel: acx100: allocated net device wlan0, driver compiled against wireless extensions v16 and Linux 2.4.21-99-athlon Sep 2 13:40:14 idefix kernel: ************ acx100_initmac_1 ************ Sep 2 13:40:14 idefix kernel: ERROR 2 trying to open firmware image file '/usr/share/acx/RADIO16.BIN': file not found - make sure this EXACT filename is in eXaCtLy this directory! Sep 2 13:40:14 idefix kernel: WARNING: no suitable radio module (/usr/share/acx/RADIO16.BIN) found to load. No problem in case of older combined firmware, FATAL when using new separated firmware. Sep 2 13:40:14 idefix kernel: acx111_create_dma_regions: set up acx111 queue memory configuration (queue configs + descriptors) Sep 2 13:40:14 idefix kernel: acx100_init_wep: writing WEP options. Sep 2 13:40:14 idefix kernel: get_mask 0x00004182, set_mask 0x00000000 Sep 2 13:40:14 idefix kernel: ERROR: don't know how to get sensitivity for this radio type, please try to add that! Sep 2 13:40:14 idefix kernel: Got sensitivity value 0 Sep 2 13:40:14 idefix kernel: Got antenna value 0x4A Sep 2 13:40:14 idefix kernel: Got regulatory domain 0x10 Sep 2 13:40:14 idefix kernel: get_mask 0x00000000, set_mask 0x00000000 - after update Sep 2 13:40:14 idefix kernel: Regulatory domain ID as read from EEPROM: 0x44 Sep 2 13:40:14 idefix kernel: hw_unavailable-- Sep 2 13:40:14 idefix kernel: acx100: form factor 0x01 (D-Link DWL-520+/650+/G650+/Planet WL-8305?), radio type 0x16 (UNKNOWN, used e.g. in ACX111 cards, please report the radio type name!), EEPROM version 0x0005. Uploaded firmware 'Rev 0.1.0.11' (0x03010101). Sep 2 13:40:14 idefix kernel: creating /proc entry driver/acx_wlan0 Sep 2 13:40:14 idefix kernel: creating /proc entry driver/acx_wlan0_diag Sep 2 13:40:14 idefix kernel: creating /proc entry driver/acx_wlan0_eeprom Sep 2 13:40:14 idefix kernel: creating /proc entry driver/acx_wlan0_phy Sep 2 13:40:14 idefix kernel: acx100_probe_pci: TI acx_pci.o: Ver 0.2.0pre8 Loaded Successfully Sep 2 13:40:15 idefix kernel: firmware version >= 1.9.3.e --> using software timer Sep 2 13:40:15 idefix kernel: initial settings update on iface activation. Sep 2 13:40:15 idefix kernel: get_mask 0x00000000, set_mask 0x0037fefc Sep 2 13:40:15 idefix kernel: acx100_set_status: Setting status = 0 (STARTED) Sep 2 13:40:15 idefix kernel: ERROR: attempt to set the timer before the card interface is up! Please report with a debug=0xffff log!! Sep 2 13:40:15 idefix kernel: SSID = STA93E922, len = 9 Sep 2 13:40:15 idefix kernel: acx100_set_beacon_template failed. Sep 2 13:40:15 idefix kernel: SSID = STA93E922, len = 9 Sep 2 13:40:15 idefix kernel: acx100_set_probe_response_template failed. Sep 2 13:40:15 idefix kernel: Updating Tx fallback to 0 retries Sep 2 13:40:15 idefix kernel: Updating WEP key settings Sep 2 13:40:15 idefix kernel: Updating transmit power: 18 dBm Sep 2 13:40:15 idefix kernel: FIXME: unknown/unsupported radio type, cannot modify Tx power level yet! Sep 2 13:40:15 idefix kernel: Updating antenna value: 0x4A Sep 2 13:40:15 idefix kernel: Updating Energy Detect (ED) threshold: 112 Sep 2 13:40:15 idefix kernel: Updating Channel Clear Assessment (CCA) value: 0x0D Sep 2 13:40:16 idefix kernel: Updating 802.11 power save mode settings: wakeup_cfg 0x00, listen interval 0, options 0x00, hangover period 0, enhanced_ps_transition_time 0 Sep 2 13:40:16 idefix kernel: Previous PS mode settings: wakeup_cfg 0xa8, listen interval 61, options 0x70, hangover period 207, enhanced_ps_transition_time 65276 Sep 2 13:40:16 idefix kernel: wakeup_cfg: 0x00 Sep 2 13:40:16 idefix kernel: power save mode change was successful Sep 2 13:40:16 idefix kernel: Updating: enable Tx Sep 2 13:40:16 idefix kernel: Updating: enable Rx Sep 2 13:40:16 idefix kernel: Updating short retry limit: 5, long retry limit: 3 Sep 2 13:40:17 idefix kernel: Updating xmt MSDU lifetime: 4096 Sep 2 13:40:17 idefix kernel: Updating regulatory domain: 0x44 Sep 2 13:40:17 idefix kernel: Invalid or unsupported regulatory domain 0x44 specified, falling back to FCC (USA)! Please report if this sounds fishy! Sep 2 13:40:17 idefix kernel: acx100_set_status: Setting status = 1 (SCANNING) Sep 2 13:40:17 idefix kernel: ERROR: attempt to set the timer before the card interface is up! Please report with a debug=0xffff log!! Sep 2 13:40:17 idefix kernel: Updating channel: 11 Sep 2 13:40:17 idefix kernel: get_mask 0x00000000, set_mask 0x00000000 - after update Sep 2 13:40:17 idefix kernel: module count ++ Sep 2 13:40:17 idefix dhcpcd[2216]: broadcasting DHCP_DISCOVER Sep 2 13:40:20 idefix dhcpcd[2216]: timed out waiting for a valid DHCP server response Sep 2 13:40:20 idefix dhcpcd[2216]: modify_resolvconf restore Sep 2 13:40:20 idefix kernel: acx100_set_status: Setting status = 0 (STARTED) Sep 2 13:40:20 idefix kernel: ERROR: attempt to set the timer before the card interface is up! Please report with a debug=0xffff log!! Sep 2 13:40:20 idefix kernel: module count -- Sep 2 13:40:20 idefix modify_resolvconf: no matching backup found, left everything alone Sep 2 13:40:20 idefix dhcpcd[2216]: modify_resolvconf returns 0 Sep 2 13:40:20 idefix dhcpcd-hook: State: down. Leaseinfo: <none given> Sep 2 13:40:20 idefix dhcpcd-hook: Skipping 'ifdown $INTERFACE -o dhcp' call