* Ekkard Gerlach schrieb:
Wahrscheinlich gelöst, defektes IDE100-Kabel!
... leider doch nicht .. :-( habe das:
Jul 29 19:03:39 rex2 kernel: hda: dma_timer_expiry: dma status == 0x24 Jul 29 19:03:39 rex2 kernel: hda: lost interrupt Jul 29 19:03:39 rex2 kernel: hda: dma_intr: bad DMA status (dma_stat=30) Jul 29 19:03:39 rex2 kernel: hda: dma_intr: status=0x50 { DriveReady SeekComplete }
immer noch. Habe schon den write Cache ausgeschaltet mit hdparm -W0 /dev/hda aber das hilft nicht. HAt hier jmd auch Probleme mit einem AMD761+686B Chipsatz und großen Festplatten (160GB)? Wird im BIOS DMA33 eingestellt, dann funktioniert alles einwandfrei . Der Chipsatz ist aber erkannt: aus dmesg: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1 ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:pio hda: HDS722516VLAT80, ATA DISK drive Ekkard