Ok, hab's. Der Stick hat keine Partitionen! wenn ich mit fdisk das Ding Putze und eine Partition anlege primary 1, Type 'c' (FAT32 LBA) und den dann formatiere kann ich sowohl unter $inlo$, als auch unter Linux darauf zugreifen. Der einzige Wehrmutstropfen ist: ich verliere 4,5 MB. es sind dann nur noch 126301000 von 131072000 bytes verfügbar. Na ok, damit muss ich halt leben. - Arndt Am Mittwoch, 17. März 2004 18:36 schrieb Arndt Stedler:
Hallo Allerseits... Habe ein Problem mit meinem QDI USB-Stick Unter Windows (98/2000/XP) Läuft er wohl zufriedenstellend, aber unter Linux
sieht das so aus:
fdisk /dev/sda
Platte /dev/sda: 131 MByte, 131072000 Byte 5 Köpfe, 50 Sektoren/Spuren, 1024 Zylinder Einheiten = Zylinder von 250 * 512 = 128000 Bytes
Gerät boot. Anfang Ende Blöcke Id Dateisystemtyp /dev/sda1 ? 7679804 9857553 272218546+ 20 Unbekannt Partition 1 hat unterschiedliche phys./log. Anfänge (nicht-Linux?): phys=(356, 97, 46) logisch=(7679803, 4, 9) Partition 1 hat unterschiedliche phys./log. Enden: phys=(357, 116, 40) logisch=(9857552, 1, 1) Partition 1 endet nicht an einer Zylindergrenze. /dev/sda2 ? 5320737 7476642 269488144 6b Unbekannt Partition 2 hat unterschiedliche phys./log. Anfänge (nicht-Linux?): phys=(288, 110, 57) logisch=(5320736, 4, 3) Partition 2 hat unterschiedliche phys./log. Enden: phys=(269, 101, 57) logisch=(7476641, 4, 40) Partition 2 endet nicht an einer Zylindergrenze. /dev/sda3 ? 2155958 7749410 699181456 53 OnTrack DM6 Aux3 Partition 3 hat unterschiedliche phys./log. Anfänge (nicht-Linux?): phys=(345, 32, 19) logisch=(2155957, 2, 42) Partition 3 hat unterschiedliche phys./log. Enden: phys=(324, 77, 19) logisch=(7749409, 1, 3) Partition 3 endet nicht an einer Zylindergrenze. /dev/sda4 * 5578511 5578596 10668+ 49 Unbekannt Partition 4 hat unterschiedliche phys./log. Anfänge (nicht-Linux?): phys=(87, 1, 0) logisch=(5578510, 3, 14) Partition 4 hat unterschiedliche phys./log. Enden: phys=(335, 78, 2) logisch=(5578595, 4, 50) Partition 4 endet nicht an einer Zylindergrenze. ---------------------------------------- Der Descriptor (via lsusb -v) sieht so aus: ---------------------------------------- Bus 001 Device 003: ID 0ea0:6828 Ours Technology, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 Interface bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0ea0 Ours Technology, Inc. idProduct 0x6828 bcdDevice 1.10 iManufacturer 1 USB iProduct 2 Flash Disk iSerial 3 3E3A080C3FE21456 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 64 bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 64 bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type none wMaxPacketSize 2 bInterval 255 Language IDs: (length=4) 0409 English(US) ----------------------------------------
Kann ich das ding einfach mit fdisk bearbeiten? oder geht dat net? Hat vielleicht schon einer damit erfahrung gesammelt? Ich hwürde den halt gern auch unter Linux benutzen (SuSE 8.2/9.0)
Gruss - Arndt