Hallo Liste,
versuche jetzt schon seit einiger Zeit mit k3b oder
anderen GUI's und mit cdrecord in der shell meine
Backup CD-RW zu löschen. Klappt aber alles nicht.
Ausgabe siehe unten. Googeln hat nix wirklich erhellendes
gebracht, hoffe hier weiss jemand Rat.Das device habe
ich mittels cdrecord -scanbus ermittelt, sollte also stimmen.
mfg
Michael
linux:/usr/bin # cdrecord -v dev=3D0,0,0 speed=3D2 blank=3Dall
Cdrecord-Clone 2.01a18-dvd (i686-suse-linux) Copyright (C) 1995-2003 J=F6rg=
=20
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to .
Note: The author of cdrecord is not to be bothered with problems in this=20
version.
TOC Type: 1 =3D CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version=20
(okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75=
=20
02/10/21 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'MITSUMI '
Identifikation : 'CR-48XATE '
Revision : '1.0B'
Device seems to be: Philips CDD-522.
Current: 0x0009
Profile: 0x0008
Profile: 0x0009 (current)
Profile: 0x000A
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R
Drive buf size : 13254656 =3D 12944 KB
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
ATIP start of lead in: -11754 (97:25/21)
ATIP start of lead out: 335100 (74:30/00)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 8
Manufacturer: Hitachi Maxell, Ltd.
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
cdrecord: Input/output error. blank unit: scsi sendcmd: no error
CDB: A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 9600s
cdrecord: Cannot blank disk, aborting.
linux:/usr/bin #
