Hi, habe ebenfalls Stress fdamit, mein Kartenlesegerät (MBO, für 4 Sorten Karten) ans Laufen zu bekommen: Folgende Ausgaben kann ich bereits verbuchen: (Suse 9.0, Kernel 2.6.3) jupp:/lib/modules/2.6.3/kernel/drivers # cdrecord -scanbus Cdrecord-ProDVD-Clone 2.01a23-2 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling Unlocked features: Limited features: Linux sg driver version: 3.5.30 Using libscg version 'schily-0.7'. scsibus1: 1,0,0 100) 'SMSC ' '223 U HS-CF' '1.95' Removable Disk 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * Auszug aus lsmod: sg 30176 0 usb_storage 38784 0 ide_scsi 12356 0 scsi_mod 64044 3 sg,usb_storage,ide_scsi snd_pcm_oss 49188 0 jupp:/lib/modules/2.6.3/kernel/drivers # cat /proc/scsi/scsi Attached devices: Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: SMSC Model: 223 U HS-CF Rev: 1.95 Type: Direct-Access ANSI SCSI revision: 02 jupp:/lib/modules/2.6.3/kernel/drivers # sginfo -l /dev/sg0 [scsi2 ch=0 id=0 lun=0] Anstöpseln zeigt in /var/log/messages: (Sorry für den langen print, aber ich weiss nicht, was wirklich wichtig ist...) Mar 2 19:25:52 jupp kernel: hub 2-0:1.0: port 2, status 101, change 1, 12 Mb/s Mar 2 19:25:53 jupp kernel: hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 Mar 2 19:25:53 jupp kernel: usb 2-2: new full speed USB device using address 6 Mar 2 19:25:53 jupp kernel: usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=3 Mar 2 19:25:53 jupp kernel: drivers/usb/core/message.c: USB device number 6 default language ID 0x409 Mar 2 19:25:53 jupp kernel: usb 2-2: Product: 223 USB97C223 Mar 2 19:25:53 jupp kernel: usb 2-2: Manufacturer: SMSC Mar 2 19:25:53 jupp kernel: usb 2-2: SerialNumber: 031017200000 Mar 2 19:25:53 jupp kernel: drivers/usb/core/usb.c: usb_hotplug Mar 2 19:25:53 jupp kernel: usb 2-2: registering 2-2:1.0 (config #1, interface 0) Mar 2 19:25:53 jupp kernel: drivers/usb/core/usb.c: usb_hotplug Mar 2 19:25:53 jupp kernel: usb-storage 2-2:1.0: usb_probe_interface Mar 2 19:25:53 jupp kernel: usb-storage 2-2:1.0: usb_probe_interface - got id Mar 2 19:25:53 jupp kernel: usb-storage: USB Mass Storage device detected Mar 2 19:25:53 jupp kernel: usb-storage: act_altsetting is 0, id_index is 89 Mar 2 19:25:53 jupp kernel: usb-storage: -- associate_dev Mar 2 19:25:53 jupp kernel: usb-storage: Transport: Bulk Mar 2 19:25:53 jupp kernel: usb-storage: Protocol: Transparent SCSI Mar 2 19:25:53 jupp kernel: usb-storage: Endpoints: In: 0xf2795cd4 Out: 0xf2795cc0 Int: 0x00000000 (Period 0) Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 Mar 2 19:25:53 jupp kernel: usb-storage: GetMaxLUN command result is 1, data is 3 Mar 2 19:25:53 jupp kernel: usb-storage: *** thread sleeping. Mar 2 19:25:53 jupp kernel: scsi2 : SCSI emulation for USB Mass Storage devices Mar 2 19:25:53 jupp kernel: usb-storage: queuecommand called Mar 2 19:25:53 jupp kernel: usb-storage: *** thread awakened. Mar 2 19:25:53 jupp kernel: usb-storage: Command INQUIRY (6 bytes) Mar 2 19:25:53 jupp kernel: usb-storage: 12 00 00 00 24 00 Mar 2 19:25:53 jupp kernel: usb-storage: Bulk Command S 0x43425355 T 0x1f L 36 F 128 Trg 0 LUN 0 CL 6 Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Mar 2 19:25:53 jupp kernel: usb-storage: Status code 0; transferred 31/31 Mar 2 19:25:53 jupp kernel: usb-storage: -- transfer complete Mar 2 19:25:53 jupp kernel: usb-storage: Bulk command transfer result=0 Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes Mar 2 19:25:53 jupp kernel: usb-storage: Status code 0; transferred 36/36 Mar 2 19:25:53 jupp kernel: usb-storage: -- transfer complete Mar 2 19:25:53 jupp kernel: usb-storage: Bulk data transfer result 0x0 Mar 2 19:25:53 jupp kernel: usb-storage: Attempting to get CSW... Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Mar 2 19:25:53 jupp kernel: usb-storage: Status code 0; transferred 13/13 Mar 2 19:25:53 jupp kernel: usb-storage: -- transfer complete Mar 2 19:25:53 jupp kernel: usb-storage: Bulk status result = 0 Mar 2 19:25:53 jupp kernel: usb-storage: Bulk Status S 0x53425355 T 0x1f R 0 Stat 0x0 Mar 2 19:25:53 jupp kernel: usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 Mar 2 19:25:53 jupp kernel: usb-storage: scsi cmd done, result=0x0 Mar 2 19:25:53 jupp kernel: usb-storage: *** thread sleeping. Mar 2 19:25:53 jupp kernel: usb-storage: queuecommand called Mar 2 19:25:53 jupp kernel: usb-storage: *** thread awakened. Mar 2 19:25:53 jupp kernel: usb-storage: Command INQUIRY (6 bytes) Mar 2 19:25:53 jupp kernel: usb-storage: 12 00 00 00 25 00 Mar 2 19:25:53 jupp kernel: usb-storage: Bulk Command S 0x43425355 T 0x20 L 37 F 128 Trg 0 LUN 0 CL 6 Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Mar 2 19:25:53 jupp kernel: usb-storage: Status code 0; transferred 31/31 Mar 2 19:25:53 jupp kernel: usb-storage: -- transfer complete Mar 2 19:25:53 jupp kernel: usb-storage: Bulk command transfer result=0 Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 37 bytes Mar 2 19:25:53 jupp kernel: usb-storage: Status code 0; transferred 36/37 Mar 2 19:25:53 jupp kernel: usb-storage: -- short transfer Mar 2 19:25:53 jupp kernel: usb-storage: Bulk data transfer result 0x1 Mar 2 19:25:53 jupp kernel: usb-storage: Attempting to get CSW... Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Mar 2 19:25:53 jupp kernel: usb-storage: Status code -32; transferred 0/13 Mar 2 19:25:53 jupp kernel: usb-storage: clearing endpoint halt for pipe 0xc0010680 Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_clear_halt: result = 0 Mar 2 19:25:53 jupp kernel: usb-storage: Attempting to get CSW (2nd try)... Mar 2 19:25:53 jupp kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Mar 2 19:25:53 jupp kernel: usb-storage: Status code 0; transferred 13/13 Mar 2 19:25:53 jupp kernel: usb-storage: -- transfer complete Mar 2 19:25:53 jupp kernel: usb-storage: Bulk status result = 0 Mar 2 19:25:53 jupp kernel: usb-storage: Bulk Status S 0x53425355 T 0x20 R 1 Stat 0x0 Mar 2 19:25:53 jupp kernel: usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 Mar 2 19:25:53 jupp kernel: usb-storage: scsi cmd done, result=0x0 Mar 2 19:25:53 jupp kernel: usb-storage: *** thread sleeping. Mar 2 19:25:53 jupp kernel: Vendor: SMSC Model: 223 U HS-CF Rev: 1.95 Mar 2 19:25:53 jupp kernel: Type: Direct-Access ANSI SCSI revision: 02 Mar 2 19:25:53 jupp kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 Mar 2 19:25:53 jupp kernel: usb-storage: queuecommand called Mar 2 19:25:53 jupp kernel: usb-storage: *** thread awakened. Mar 2 19:25:53 jupp kernel: usb-storage: Bad target number (1:0) Mar 2 19:25:53 jupp kernel: usb-storage: scsi cmd done, result=0x40000 [...] Mar 2 19:25:53 jupp kernel: usb-storage: *** thread sleeping. Mar 2 19:25:53 jupp kernel: usb-storage: queuecommand called Mar 2 19:25:53 jupp kernel: usb-storage: *** thread awakened. Mar 2 19:25:53 jupp kernel: usb-storage: Bad target number (7:0) Mar 2 19:25:53 jupp kernel: usb-storage: scsi cmd done, result=0x40000 Mar 2 19:25:53 jupp kernel: usb-storage: *** thread sleeping. Mar 2 19:25:53 jupp kernel: WARNING: USB Mass Storage data integrity not assured Mar 2 19:25:53 jupp kernel: USB Mass Storage device found at 6 So. und jetzt bin ich absolut ratlos...