Mailinglist Archive: opensuse-de (5499 mails)

[Boris Höffgen <hoeffgen@xxxxxxx>]

Hallo Leute,

ich habe immernoch ein Problem mit dem IDE-DVD-Brenner (NEC-1300a).
Das Image wird richtig erzeugt und besteht aus zwei Teilen, allerdings 
erscheint der unten aufgeführte Output. Auf der DVD sind max. 10MB
gebrannt.
Ich habe das Laufwerk im Bios  (Primary Master) komplett deaktiviert, 
damit Linux es selber erkennen kann. Es läuft unter der ide-scsi Emulation.
Weiterhin bekomme ich im Logile Interrupt-Probleme, obwohl ich die
ide-cd Option aus dem Kernel entfernt habe.
Den dma-Kanal zu aktivieren oder deaktivieren macht keinen Unterschied.

Woran könnte es liegen? Wie kann ich das Problem lösen?

Gruß

Boris

Auszug:
=======
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <bero@xxxxxxxxxxxx>
This program is free software; you can redistribute it and/or modify it 
under
the terms of the GNU General Public License as published by the Free 
Software
Foundation; either version 2, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but 
WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or 
FITNESS FOR
A PARTICULAR PURPOSE.  See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with
this program; see the file COPYING.  If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'bero-0.5a'
Driveropts: 'burnproof'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-1300A '
Revision       : '1.07'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size      : 12582912 = 12288 KB
Track 01: data  1024 MB
Track 02: data  407 MB
Total size:     1644 MB (162:56.29) = 733222 sectors
Lout start:     1644 MB (162:58/22) = 733222 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1565274
Starting to write CD/DVD at speed 2 in write mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0

Track 01:   0 of 1024 MB written.
Track 01:   1 of 1024 MB written (fifo  99%).
.
.
Track 01: 1024 of 1024 MB written (fifo 100%).
Track 01: Total bytes read/written: 1073772544/1073772544 (524303 sectors).
Starting new track at sector: 524453

Track 02:   0 of 407 MB written.
write track data: error after 0 bytes
Writing  time:  818.089s
Fixating...
Track 01: data  1024 MB
Track 02: data  407 MB
Total size:     1644 MB (162:56.29) = 733222 sectors
Lout start:     1644 MB (162:58/22) = 733222 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1565274
Trouble flushing the cache
Fixating time: 1021.894s