Hallo. Ich habe hier unter Suse 8.2 folgendes System: /dev/hda1 = swap /dev/hda2 = / /dev/hda3 = /Software /dev/hdb1 = /Files_1 /dev/hdc = /dev/dvd = /media/dvd (DVD-Brenner LG4040B) /dev/hdd1 = /Files_2 Bisher wurden per Cronjob nachts die Daten von /Files_1 nach Files_2 kopiert. Es handelt sich dabei um zwei identische Festplatten. Nachdem ich das alte DVD-ROM gegen den Brenner ausgetauscht habe, läßt sich hdd1 nicht mehr mounten. Der nächtliche Kopiervorgang wurde durchgeführt. Da hdd1 aber nicht existierte, wurde hda2 beschrieben. Woran liegt es wohl, dass sich hdd1 nicht mehr mounten läßt? Nachfolgend habe ich mal die Infos aus der boot.msg zusammengestellt, die ich für relevant halte. Ich weiss, es ist viel Text, aber ich weiss nicht, was davon wichtig ist und einiges hab ich schon rausgelöscht. Ich hoffe nichts wichtiges. Vielleicht kann mir jemand helfen. Wäre toll. Danke Peter Inspecting /boot/System.map-2.4.20-4GB Loaded 20952 symbols from /boot/System.map-2.4.20-4GB. Symbols match kernel version 2.4.20. Loaded 40 symbols from 2 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.20-4GB (root@Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:54:44 UTC 2003 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>C-ICH: IDE controller at PCI slot 00:1f.1 <6>C-ICH: chipset revision 2 <6>C-ICH: not 100%% native mode: will probe irqs later <6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA <6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: WDC WD400JB-00ENA0, ATA DISK drive <4>hdb: WDC WD1200JB-00DUA3, ATA DISK drive <4>blk: queue c03ac0c0, I/O limit 4095Mb (mask 0xffffffff) <4>blk: queue c03ac214, I/O limit 4095Mb (mask 0xffffffff) <4>hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive <4>hdd: WDC WD1200JB-00DUA3, ATA DISK drive <4>blk: queue c03ac694, I/O limit 4095Mb (mask 0xffffffff) <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: attached ide-disk driver. <4>hda: host protected area => 1 <6>hda: 78165360 sectors (40021 MB) w/8192KiB Cache, CHS=4865/255/63, UDMA(100) <4>hdb: attached ide-disk driver. <4>hdb: host protected area => 1 <6>hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100) <4>hdd: attached ide-disk driver. <4>hdd: host protected area => 1 <6>hdd: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100) <4>ide-floppy driver 0.99.newide <6>Partition check: <6> hda: hda1 hda2 hda3 <6> hdb: hdb1 <6> hdd: hdd1 <4>ide-floppy driver 0.99.newide <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <4>VFS: Mounted root (ext2 filesystem). <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,2)) for (ide0(3,2)) <4>Using r5 hash to sort names <4>VFS: Mounted root (reiserfs filesystem) readonly. <5>Trying to move old root to /initrd ... failed <5>Unmounting old root <5>Trying to free ramdisk memory ... okay <6>Freeing unused kernel memory: 160k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded <6>Adding Swap: 1036152k swap-space (priority 42) <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,65)) for (ide0(3,65)) <4>Using r5 hash to sort names <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide1(22,65)) for (ide1(22,65)) <4>is_tree_node: node level 4805 does not match to the expected one 1 <4>vs-5150: search_by_key: invalid format found in block 96. Fsck? <4>vs-13070: reiserfs_read_inode2: i/o failure occurred trying to find stat data of [1 2 0x0 SD] <4>Using r5 hash to sort names <4>is_tree_node: node level 4805 does not match to the expected one 1 <4>vs-5150: search_by_key: invalid format found in block 96. Fsck? <4>zam-7001: io error in reiserfs_find_entry <4>reiserfs: xattrs/ACLS enabled and couldn't find/create .reiserfs_priv. Failing mount. <4>reiserfs: found format "3.6" with standard journal <4>reiserfs: enabling write barrier flush mode <4>reiserfs: using ordered data mode <4>reiserfs: checking transaction log (ide0(3,3)) for (ide0(3,3)) <4>Using r5 hash to sort names Checking file systems... fsck 1.28 (31-Aug-2002) Reiserfs super block in block 16 on 0x302 of format 3.6 with standard journal Blocks (total/free): 2827440/2430919 by 4096 bytes Filesystem is clean Reiserfs super block in block 16 on 0x1641 of format 3.6 with standard journal Blocks (total/free): 29302552/27826707 by 4096 bytes Filesystem is NOT clean Reiserfs super block in block 16 on 0x341 of format 3.6 with standard journal Blocks (total/free): 29302552/24681263 by 4096 bytes Filesystem is clean Reiserfs super block in block 16 on 0x303 of format 3.6 with standard journal Blocks (total/free): 6683040/6618936 by 4096 bytes Filesystem is clean done Mounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw,mode=0620,gid=5) /dev/hdb1 on /Files_1 type reiserfs (rw) mount: wrong fs type, bad option, bad superblock on /dev/hdd1, or too many mounted file systems /dev/hda3 on /Software type reiserfs (rw) failed -- +++ GMX - die erste Adresse für Mail, Message, More +++ Bis 31.1.: TopMail + Digicam für nur 29 EUR http://www.gmx.net/topmail