Nun habe ich eine dmesg, die danach aussieht als ob nun ACPI mit dem KT400A funktioniert. Muß man dazu etwas einstellen oder funktioniert Stromsparen nun automatisch? Warum ACPI: Skipping APIC setup ? Ist diese dmesg nun ok bis auf die HD-Fehlermeldung? Ich hoffe, ich bekomme keine Rüge wegen der vollen dmesg, aber das letzte Mal wurde dies von der Liste extra gewünscht. Al # dmesg Linux version 2.4.21-87-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Thu Sep 18 10:18:21 UTC 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 501MB vmalloc/ioremap area available. 0MB HIGHMEM available. 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: RSDP (v000 KT400A ) @ 0x000f7440 ACPI: RSDT (v001 KT400A AWRDACPI 16944.11825) @ 0x1fff3000 ACPI: FADT (v001 KT400A AWRDACPI 16944.11825) @ 0x1fff3040 ACPI: MADT (v001 KT400A AWRDACPI 16944.11825) @ 0x1fff7080 ACPI: DSDT (v001 KT400A AWRDACPI 00000.04096) @ 0x00000000 ACPI: Skipping APIC setup Building zonelist for node : 0 Kernel command line: root=/dev/hdb7 splash=silent splash=silent bootsplash: silent mode. bootsplash: silent mode. Initializing CPU#0 Detected 1999.839 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3984.58 BogoMIPS Memory: 514160k/524224k available (1738k kernel code, 9680k reserved, 605k data, 176k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 2400+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030619 PCI: PCI BIOS revision 2.10 entry at 0xfb350, last bus=1 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) ACPI: PCI Interrupt Link [ALKB] (IRQs 21) ACPI: PCI Interrupt Link [ALKC] (IRQs 22) ACPI: PCI Interrupt Link [ALKD] (IRQs 23) PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 00:00:08[A] -> IRQ 11 Mode 1 Trigger 1 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 00:00:08[B] -> IRQ 10 Mode 1 Trigger 1 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 00:00:08[C] -> IRQ 12 Mode 1 Trigger 1 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 00:00:08[D] -> IRQ 5 Mode 1 Trigger 1 PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (11) already programmed PIC: IRQ (11) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PIC: IRQ (11) already programmed PIC: IRQ (10) already programmed PIC: IRQ (12) already programmed PIC: IRQ (5) already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) apm: overridden by ACPI. PISCH: Plug In Scheduler Interface (Version 6) Starting kswapd bigpage subsystem: allocated 0 bigpages (=0MB). kinoded started VFS: Disk quotas vdquot_6.5.1 aio_setup: num_physpages = 32764 aio_setup: sizeof(struct page) = 48 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize loop: loaded (max 16 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA hda: IC35L120AVV207-1, ATA DISK drive hdb: Maxtor 5T040H4, ATA DISK drive blk: queue c03e96c0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03e981c, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive hdd: Maxtor 96147H6, ATA DISK drive blk: queue c03e9cb0, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 241254720 sectors (123522 MB) w/7965KiB Cache, CHS=15017/255/63, UDMA(100) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63, UDMA(100) hdd: attached ide-disk driver. hdd: host protected area => 1 hdd: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=116301/16/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 > hdd: hdd1 ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cryptoapi: loaded RAMDISK: Compressed image found at block 0 Freeing initrd memory: 390k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 176k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded Adding Swap: 200804k swap-space (priority 42) hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } hdd: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdd: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,72), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,73), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal EXT3-fs: mounted filesystem with ordered data mode. via-rhine.c:v1.10-LK1.1.17 March-1-2003 Written by Donald Becker http://www.scyld.com/network/via-rhine.html eth0: VIA VT6102 Rhine-II at 0xd000, 00:50:ba:2d:b7:4d, IRQ 10. eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 45e1. eth1: VIA VT6102 Rhine-II at 0xec00, 00:04:61:4a:54:d4, IRQ 11. eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. eth0: Setting full-duplex based on MII #8 link partner capability of 45e1. raw1394: /dev/raw1394 device initialized usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:10.3: irq 5, pci mem e0834000 usb.c: new USB bus registered, assigned bus number 1 PCI: 00:10.3 PCI cache line size set incorrectly (32 bytes) by BIOS/FW. PCI: 00:10.3 PCI cache line size corrected to 64. ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-uhci.c: $Revision: 1.275 $ time 10:45:43 Sep 18 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 12 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 hub.c: new USB device 00:10.1-1, assigned address 2 mice: PS/2 mouse device common for all mice usb.c: USB device 2 (vend/prod 0x9bf/0xdb) is not claimed by any active driver. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded IPsec Security Association Database (SADB): initialized. IPsec Security Policy Database (SPD): initialized. IPsec PF_KEY V2: initialized HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 1.1.4.1 HiSax: Layer2 Revision 1.1.4.1 HiSax: TeiMgr Revision 1.1.4.1 HiSax: Layer3 Revision 1.1.4.1 HiSax: LinkLayer Revision 1.1.4.1 HiSax: Approval certification failed because of HiSax: unauthorized source code changes IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0 IPv6 over IPv4 tunneling driver usb.c: registered new driver auerswald auermain.c: device is a COMpact 2206,Ser# HiSax: Card 1 Protocol EDSS1 Id=auerswald_usb0 (0) HiSax: DSS1 Rev. 1.1.4.1 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport0: PC-style at 0x378 [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 eth0: no IPv6 routers present -- Infos zu Softwarepatenten: http://swpat.ffii.org/index.de.html http://petition.eurolinux.org/index.html?LANG=de