Hi Liste, ich habe heute Suse 8.1 installiert, und habe grosze Probs mit meinem DVD und CDRW Laufwerk. Es werden, naja, einfach zuviele Geraete gefunden... die Verknuepfung fuer das DVD-Rom wird noch auf dem Desktop erstellt, der Brenner taucht leider nicht auf. Bei meinen alten Installationen (Suse 6.2, 7.3) gabs mit der gleichen Konfigarution keine Probs. Meine boot.msg: ------ schnipp ------ Inspecting /boot/System.map-2.4.19-4GB Loaded 14220 symbols from /boot/System.map-2.4.19-4GB. Symbols match kernel version 2.4.19. Loaded 119 symbols from 7 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.19-4GB (root@Athlon.suse.de) (gcc version 3.2) #1 Fri Sep 13 13:19:15 UTC 2002 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) <4> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) <4> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <5>511MB LOWMEM available. <7>ACPI: have wakeup address 0xc0001000 <6>Advanced speculative caching feature not present <4>On node 0 totalpages: 131056 <4>zone(0): 4096 pages. <4>zone(1): 126960 pages. <4>zone(2): 0 pages. <6>ACPI: RSDP (v000 AMI ) @ 0x000fabb0 <6>ACPI: RSDT (v001 AMIINT 00000.00016) @ 0x1fff0000 <6>ACPI: FADT (v001 AMIINT 00000.00017) @ 0x1fff0030 <4>ACPI: MADT not present <4>Building zonelist for node : 0 <4>Kernel command line: root=/dev/hde5 hdc=ide-scsi vga=791 <4>ide_setup: hdc=ide-scsi <6>Initializing CPU#0 <4>Detected 1211.949 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 2418.27 BogoMIPS <6>Memory: 514632k/524224k available (1685k kernel code, 9204k reserved, 413k data, 164k init, 0k highmem) <6>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) <6>Inode cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) <4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes) <7>CPU: Before vendor init, caps: 0183f9ff c1c7f9ff 00000000, vendor = 2 <6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) <6>CPU: L2 Cache: 256K (64 bytes/line) <7>CPU: After vendor init, caps: 0183f9ff c1c7f9ff 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 0183f9ff c1c7f9ff 00000000 00000000 <7>CPU: Common caps: 0183f9ff c1c7f9ff 00000000 00000000 <4>CPU: AMD Athlon(tm) Processor stepping 02 <6>Enabling fast FPU save and restore... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>ACPI: Subsystem revision 20020829 <6>PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1 <6>PCI: Using configuration type 1 <6>ACPI: Interpreter enabled <6>ACPI: Using PIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <6>ACPI: Power Resource [URP1] (off) <6>ACPI: Power Resource [URP2] (off) <6>ACPI: Power Resource [FDDP] (off) <6>ACPI: Power Resource [LPTP] (off) <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) <6>PCI: Probing PCI hardware <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: overridden by ACPI. <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>kinoded started <5>VFS: Diskquotas version dquot_6.5.0 initialized <5>aio_setup: num_physpages = 32764 <5>aio_setup: sizeof(struct page) = 48 <6>vesafb: framebuffer at 0xd8000000, mapped to 0xe0812000, size 65536k <6>vesafb: mode is 1024x768x16, linelength=2048, pages=0 <6>vesafb: protected mode interface info at c000:b950 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture.... found (1024x768, 27920 bytes). <4>Console: switching to colour frame buffer device 106x34 <6>fb0: VESA VGA frame buffer device <6>Detected PS/2 Mouse Port. <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>AMD_IDE: IDE controller on PCI bus 00 dev 39 <4>AMD_IDE: chipset revision 7 <4>AMD_IDE: not 100%% native mode: will probe irqs later <4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio <4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio <4>HPT370A: IDE controller on PCI bus 00 dev 50 <4>PCI: Enabling device 00:0a.0 (0005 -> 0007) <4>HPT370A: chipset revision 4 <4>HPT370A: not 100%% native mode: will probe irqs later <4>HPT370: using 33MHz PCI clock <4> ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:DMA, hdf:pio <4> ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio <4>hda: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive <4>hdc: AOPEN CD-RW CRW2440, ATAPI CD/DVD-ROM drive <4>hde: IC35L080AVVA07-0, ATA DISK drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>ide2 at 0xdc00-0xdc07,0xda02 on irq 10 <4>blk: queue c039cfbc, I/O limit 4095Mb (mask 0xffffffff) <4>hde: safely enabled flush <6>hde: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=159560/16/63, UDMA(100) <4>ide-floppy driver 0.99.newide <6>Partition check: <6> hde: [PTBL] [10011/255/63] hde1 hde2 hde3 < hde5 hde6 hde7 > <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>loop: loaded (max 16 devices) <6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 <6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. <4>ide-floppy driver 0.99.newide <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 4096 buckets, 32Kbytes <6>TCP: Hash tables configured (established 32768 bind 65536) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 229k freed <4>VFS: Mounted root (ext2 filesystem). <6>Journalled Block Device driver loaded <4>hda: no flushcache support <4>hdc: no flushcache support <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: TOSHIBA Model: DVD-ROM SD-M1612 Rev: 1004 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.08 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.08 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.08 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.08 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.08 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.08 <4> Type: CD-ROM ANSI SCSI revision: 02 <4> Vendor: AOPEN Model: CD-RW CRW2440 Rev: 2.08 <4> Type: CD-ROM ANSI SCSI revision: 02 <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() <7>sd_attach() ------ schnap ------ danach loeppt alles normal. Dem Kernel wird nur ide-scsi=hdc1 uebergeben... Hat einer nen Tip? Grusz Detlef