Mailinglist Archive: opensuse-de (5757 mails)

[Alex Klein <suse-linux@xxxxxxxxxxxxxx>]

Hallo, 

* Am 21.Oct.2002 postete Mario Ohnewald:
> Hi,
> hier mein output: (sorry, das mit den > klappt irgendwie nicht ;(   )

Kick OjE. Den bekommst Du nicht ML-tauglich. Den bekommt man nur so,
daß ihn die anderen nicht mehr steinigen wollen. ;)

Versuch doch mal Pegasus Mail für Win32. http://www.pmail.com


==================== isapnp.conf ==========================
server:~ # pnpdump
# $Id: pnpdump_main.c,v 1.27 2001/04/30 21:54:53 fox Exp $
# Release isapnptools-1.26
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler
flags:  -DREALTIME -DHAVE_PROC -DENABLE_PCI -DHAVE_SCHED_SETSCHEDULER -DHAVE
_NANOSLEEP -DWANT_TO_VALIDATE
#
# Trying port address 0273
# Board 1 has serial identifier 14 06 00 00 57 01 00 27 4c

# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING

# Card 1: (serial identifier 14 06 00 00 57 01 00 27 4c)
# Vendor Id SAG0001, Serial Number 100663383, checksum 0x14.
# Version 1.0, Vendor version 0.1
# ANSI string -->speed win SEDLBAUER AG<--
#
# Logical device id SAG0001
#     Device supports I/O range check register
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x39
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3b
#     Device supports vendor reserved register @ 0x3d
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed
if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE SAG0001/100663383 (LD 0

# Multiple choice time, choose one only !

#     Start dependent functions: priority acceptable
#       Logical device decodes 10 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x03f0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0100) (CHECK))
#       IRQ 3, 4, 5, 7, 10, 11, 12, 13 or 15.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 3 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 10 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x03f0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
(IO 0 (SIZE 8) (BASE 0x0100) (CHECK))
#       IRQ 5.
#             High true, edge sensitive interrupt (by default)
(INT 0 (IRQ 5 (MODE +E)))

#       Start dependent functions: priority acceptable
#       Logical device decodes 10 bit IO address lines
#             Minimum IO base address 0x0100
#             Maximum IO base address 0x03f0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0100) (CHECK))
#       IRQ 7.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 7 (MODE +E)))

#     End dependent functions
 (NAME "SAG0001/100663383[0]{speed win SEDLBAUER AG}")
(ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY

================================================================

Check this out! Vielleicht geht's. Habs schon lange nicht mehr
gemacht. ;) 

# isapnp /etc/isapnp.conf


[TOFU geschmolzen und von den Mainzelmännchen nach /dev/trashdevice
schieben lassen] 


Beste Grüße

Alex

-- 
> Nicht ganz: s/\(Prof\. \)B/\1H/
Alle mal hergucken: Bernd fummelt mit 'nem BH 'rum! 
                                              [Bernd und Moss in suse-talk]