From: Thomas Fick
Hast Du route auch neu gestartet? Sieht mir nicht danach aus.
Hallo Thomas Inzwischen habe ich sogar aus Verzweiflung mal den Rechner komplett neu gestartet. Mal so'n kleiner screen-Mitschnitt: Welcome to SuSE Linux 8.0 (i386) - Kernel 2.4.18-4GB (0). pinguin login: martin Password: Have a lot of fun... martin@pinguin:~> su Password: pinguin:/home/martin # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 pinguin.ebfnet 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 pinguin:/home/martin # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 192.168.1.250 255.255.255.0 UG 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 pinguin:/home/martin # ifstatus eth0 eth0 is up 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP> mtu 1500 qdisc pfifo_fast qlen 100 link/ether 00:50:da:48:f5:99 brd ff:ff:ff:ff:ff:ff inet 192.168.1.250/24 brd 192.168.1.255 scope global eth0 inet6 fe80::250:daff:fe48:f599/10 scope link Configured routes for interface eth0: 192.168.1.1 192.168.1.255 255.255.255.0 eth0 192.168.114.254 192.168.114.255 255.255.0.0 eth0 default 192.168.1.1 - - Active routes for interface eth0: 192.168.1.0/24 via 192.168.1.250 scope link 192.168.1.0/24 proto kernel scope link src 192.168.1.250 0 of 3 configured routes for interface eth0 up pinguin:/home/martin # ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:50:DA:48:F5:99 inet addr:192.168.1.250 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::250:daff:fe48:f599/10 Scope:Link EtherTalk Phase 2 addr:65280/13 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1804 errors:0 dropped:0 overruns:0 frame:0 TX packets:221 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 RX bytes:181437 (177.1 Kb) TX bytes:17579 (17.1 Kb) pinguin:/home/martin # Gruß Martin