Mailinglist Archive: opensuse-de (5248 mails)

[a_bock@xxxxxx (Andreas Bock)]

Hallo Liste,
Seit gestern habe ich ein Problem mit SCSI. Hier die Meldungen aus
/var/log/warn
-----------------------------------------------------
Mar 11 02:41:33 gini kernel: scsi : aborting command due to timeout :
pid
45659, scsi0, channel 0, id 0, lun 0 Read (6) 0b 9b 1c 02 00 
Mar 11 02:41:33 gini kernel: SCSI host 0 abort (pid 45659) timed out
-
resetting
Mar 11 02:41:33 gini kernel: SCSI bus is being reset for host 0
channel 0.
Mar 11 08:41:23 gini kernel: (scsi0:0:0:0) No active SCB for
reconnecting
target - Issuing BUS DEVICE RESET.
Mar 11 08:41:23 gini kernel: (scsi0:0:0:0)       SAVED_TCL=0x0,
ARG_1=0xff,
SEQADDR=0xf8
Mar 11 09:12:27 gini kernel: (scsi0:-1:-1:-1) aic7xxx_isr -
referenced scb not
valid during scsiint 0x6 scb(255)
Mar 11 09:12:27 gini kernel:       SIMODE0 0x0, SIMODE1 0xa4, SSTAT0
0x5,
SEQADDR 0x1
Mar 11 09:12:27 gini kernel: (scsi0:0:0:0) No active SCB for
reconnecting
target - Issuing BUS DEVICE RESET.
Mar 11 09:12:27 gini kernel: (scsi0:0:0:0)       SAVED_TCL=0x0,
ARG_1=0xff,
SEQADDR=0xf8
Mar 11 09:51:16 gini kernel: scsi : aborting command due to timeout :
pid
53426, scsi0, channel 0, id 0, lun 0 Read (6) 0c d9 90 02 00 
Mar 11 09:51:18 gini kernel: SCSI host 0 abort (pid 53426) timed out
-
resetting
Mar 11 09:51:18 gini kernel: SCSI bus is being reset for host 0
channel 0.
Mar 12 09:41:15 gini kernel: scsi : aborting command due to timeout :
pid
149848, scsi0, channel 0, id 0, lun 0 Read (6) 09 16 4e 02 00 
Mar 12 09:41:17 gini kernel: SCSI host 0 abort (pid 149848) timed out
-
resetting
Mar 12 09:41:17 gini kernel: SCSI bus is being reset for host 0
channel 0.
Mar 12 13:56:04 gini kernel: scsi : aborting command due to timeout :
pid
153804, scsi0, channel 0, id 0, lun 0 Read (6) 12 d2 60 40 00 
Mar 12 13:56:06 gini kernel: SCSI host 0 abort (pid 153804) timed out
-
resetting
Mar 12 13:56:06 gini kernel: SCSI bus is being reset for host 0
channel 0.
-----------------------------------------------

Der Rechner läuft mit SuSE 6.1 Kernel 2.2.13 Seit gut einem Jahr ohne
größerere Änderungen.
Seit Ende Januar läuft er im Dauerbetrieb und machte bisher keine
Probleme.
SCSI-Controler ist ein Adaptec 2840 (VL) 
Festplatte hängt nur eine drin id 0 Vendor: SEAGATE  Model: ST31200N 

Heisst das jetzt, ich muss mich langsam nach ner neuen Platte
umsehen?

Danke schon mal
Andreas


-- 
-------------------------------------------------------------------
Andreas Bock                          registered Linux User #136542
mailto:a_bock@xxxxxx                                  ICQ #59734306
-------------------------------------------------------------------

---------------------------------------------------------------------
To unsubscribe, e-mail: suse-linux-unsubscribe@xxxxxxxx
For additional commands, e-mail: suse-linux-help@xxxxxxxx