[opensuse-da] yast/printer.da.po

+# translation of printer.po to dansk # translation of printer.po to # translation of printer.da.po to # translation of printer.da.po to # Danish message file for YaST2 (@memory@). # Copyright (C) 2002 SuSE Linux AG. # Copyright (C) 2002 SuSE GmbH. # # Olav Pettershagen , 2004. # Olav Pettershagen , 2004. # Keld Simonsen , 2004. # Martin Schlander , 2006, 2007. # Jan Madsen , 2006. # Martin Moeller , 2006. # Jan Madsen , 2008. # Martin Schlander , 2008. msgid "" msgstr "" "Project-Id-Version: printer\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2008-10-02 13:02+0200\n" -"PO-Revision-Date: 2008-05-23 12:51+0200\n" -"Last-Translator: Martin Schlander \n" -"Language-Team: \n" +"PO-Revision-Date: 2008-10-15 23:24+0100\n" +"Last-Translator: Jan Madsen \n" +"Language-Team: dansk \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Generator: KBabel 1.11.4\n" #. Header of a DownloadProgress indicator: #. Busy message: #. Body of a Popup::ShowFeedback: #: src/Printer.ycp:267 src/Printer.ycp:282 msgid "Retrieving printer driver information..." -msgstr "" +msgstr "Henter information om printer-drivere..." #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printer.ycp:295 -#, fuzzy msgid "Failed to create PPD database." -msgstr "Filen %1 blev tilføjet i databasen" +msgstr "Oprettelse af PPD-database fejlede." #. Message of a Popup::Error where %1 will be replaced by the file name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printer.ycp:311 src/Printer.ycp:434 src/Printer.ycp:513 #: src/Printer.ycp:573 -#, fuzzy, ycp-format +#, ycp-format msgid "File %1 does not exist." -msgstr "Køen %1 findes ikke." +msgstr "Filen %1 findes ikke." #. Message of a Popup::Error where %1 will be replaced by the file name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/Printer.ycp:329 src/Printer.ycp:452 src/Printer.ycp:525 #: src/Printer.ycp:585 #, ycp-format msgid "Failed to read %1." -msgstr "" +msgstr "Læsning af %1 fejlede." #. Header for a finished ProgressBar: #: src/Printer.ycp:352 msgid "Retrieved printer driver information" -msgstr "" +msgstr "Hentede information om printer-drivere." #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no printer was autodetected. #. The latter results no error. #: src/Printer.ycp:418 msgid "Failed to detect printers automatically." -msgstr "" +msgstr "Automatisk søgning efter printere fejlede." # #. Header for a finished ProgressBar: #: src/Printer.ycp:466 -#, fuzzy msgid "Detected printers" msgstr "Fundne printere" # #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no queue was detected #. (e.g. simply because there is no queue). This results no error. #: src/Printer.ycp:503 -#, fuzzy msgid "Failed to detect print queues." -msgstr "Lav kun liste over fundne printere" +msgstr "Søgning efter udskriftskøer fejlede." #. Popup::ErrorDetails message where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no queue was detected #. (e.g. simply because there is no queue). This results no error. #: src/Printer.ycp:561 #, ycp-format msgid "Failed to determine driver options for queue %1." -msgstr "" +msgstr "Bestemmelse af driver-valgmuligheder for køen %1 fejlede." # #. 1. progress stage name of a Progress::New: #: src/Printer.ycp:607 -#, fuzzy msgid "Autodetect already configured printers" -msgstr "Vis de fundne eller konfigurerede printere" +msgstr "Søg automatisk efter allerede konfigurerede printere" # #. 1. progress step progress bar title of a Progress::New: #: src/Printer.ycp:610 -#, fuzzy msgid "Autodetecting already configured printers..." -msgstr "Vis de fundne eller konfigurerede printere" +msgstr "Søger automatisk efter allerede konfigurerede printere..." # #. Define the progress stages: #. Header of a Progress::New: #: src/Printer.ycp:647 -#, fuzzy msgid "Finishing Printer Configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Færdiggør printerkonfiguration" # #. 1. progress stage name of a Progress::New: #: src/Printer.ycp:651 -#, fuzzy msgid "Finish printer configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Færdiggør printerkonfiguration" # #. 1. progress step progress bar title of a Progress::New: #: src/Printer.ycp:654 -#, fuzzy msgid "Finishing printer configuration..." -msgstr "Gemmer printerkonfiguration" +msgstr "Færdiggør printerkonfiguration..." # #. Message of a Popup::Error. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Do not confuse this error with the case when no queue was detected #. (e.g. simply because there is no queue). This results no error. #: src/Printer.ycp:756 -#, fuzzy msgid "Cannot show print queues (failed to detect print queues)." -msgstr "Lav kun liste over fundne printere" +msgstr "Kan ikke vise udskriftskøer (søgning efter udskriftskøer fejlede)." #. When the queue is the default queue on the local host: #: src/Printer.ycp:788 msgid "Yes" -msgstr "" +msgstr "Ja" #. When printing is disabled for the queue: #: src/Printer.ycp:794 -#, fuzzy msgid "Printout disabled" -msgstr "Udskrift &færdig" +msgstr "Udskrift deaktiveret" #. When the queue rejects print jobs and printing is disabled: #: src/Printer.ycp:799 msgid "Rejecting print jobs, printout disabled" -msgstr "" +msgstr "Afviser udskriftsopgaver - udskrift deaktiveret" # #. When the queue rejects print jobs: #: src/Printer.ycp:803 -#, fuzzy msgid "Rejecting print jobs" -msgstr "Afvis udskriftsopgaver" +msgstr "Afviser udskriftsopgaver" #. Show a fallback text if there are no local queues: #: src/Printer.ycp:827 msgid "There is no print queue." -msgstr "" +msgstr "Der er ingen udskriftskø." # #. Message of a Popup::Error. #. Only a simple message because before the function AutodetectPrinters #. was called and this function would have shown more specific messages. #: src/Printer.ycp:865 -#, fuzzy msgid "Failed to autodetect printers." -msgstr "Lav kun liste over fundne printere" +msgstr "Automatisk søgning efter printere fejlede." # #. Message of a Popup::Error. #. Only a simple message because before the function CreateDatabase #. was called and this function would have shown more specific messages. #: src/Printer.ycp:1100 -#, fuzzy msgid "Failed to create the printer driver database." -msgstr "En fejl opstod under oprettelse af printerdatabasen." +msgstr "Oprettelse af printer-driver-databasen fejlede." #. If no driver was already selected, show a meaningful text as #. fallback entry for a SelectionBox when no connection is selected. #. It will be replaced by real content, when a connection is selected. #: src/Printer.ycp:1125 msgid "Select a connection, then matching drivers show up here." -msgstr "" +msgstr "Vælg en tilslutning, så vises passende drivere her." #. Busy message: #. Body of a Popup::ShowFeedback: #: src/Printer.ycp:1137 msgid "Determine available drivers..." -msgstr "" +msgstr "Bestem tilgængelige drivere..." #. If the driver_items list is empty (e.g. because of a too restrictive driver_filter_string), #. show a meaningful text as fallback entry. #: src/Printer.ycp:1171 msgid "No matching driver found. Try 'More Drivers' or 'All Drivers'." -msgstr "" +msgstr "Ingen passende driver fundet. Prøv 'Flere drivere' eller 'Alle drivere'." #. Busy message: #. Body of a Popup::ShowFeedback: #: src/Printer.ycp:1190 msgid "Processing many drivers. Please wait..." -msgstr "" +msgstr "Behandler mange drivere. Vent venligst..." #. Message of a Popup::Error. #. Only a simple message because this is only a fallback case #. which should not happen at all: #: src/Printer.ycp:1580 msgid "Failed to determine the driver options." -msgstr "" +msgstr "Bestemmelse af driver-valgmulighederne fejlede." # #. Return at least a list with only a fallback string so that the user is informed: #. Header of a Popup::AnyMessage when "Driver Options" was selected: #: src/Printer.ycp:1583 src/Printer.ycp:1698 src/basicmodify.ycp:545 -#, fuzzy msgid "No driver options available" -msgstr "<P>Ingen information er tilgængelig.</P>" +msgstr "Ingen tilgængelige driver-valgmuligheder" #. Dummy info for a currently selected item: #: src/Printer.ycp:1636 msgid "currently selected" -msgstr "" +msgstr "nuværende valgt" # #. Info when a currently selected item is already set: #: src/Printer.ycp:1639 -#, fuzzy msgid "current setting of the print queue" -msgstr "Angiv status for køen" +msgstr "nuværende opsætning af udskriftskøen" #. Enforce user confirmation before a new service is started #. to be on the safe side that the user knows about it: #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:97 msgid "Start local running CUPS daemon" -msgstr "" +msgstr "Start lokalt kørende CUPS-dæmon" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:99 msgid "A local running CUPS daemon is needed." -msgstr "" +msgstr "En lokalt kørende CUPS-dæmon er nødvendig." #. Popup::ErrorDetails message: #: src/Printerlib.ycp:106 msgid "Failed to start the CUPS daemon" -msgstr "" +msgstr "Start af CUPS-dæmonen fejlede" #. Wait half a minute for a new started cupsd is necessary because #. when a client-only config is switched to a "get Browsing info" config #. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds #. so that the local cupsd should listen at least 31 seconds to get Browsing info #. before e.g. the Overview dialog can be shown with the right current queues. #: src/Printerlib.ycp:118 msgid "" "Started the CUPS daemon.\n" "Waiting half a minute so that it is ready to operate..." msgstr "" +"Startede CUPS-dæmonen.\n" +"Venter et halvt minut, så den er klar til at køre..." #. It can take up to a few minutes when a cupsd is started #. for the very first time (e.g. on a new installed system) #. until the cupsd is actually ready to operate. #. E.g. because parsing of thousands of PPDs may need much time. #. Therefore enforce waiting one minute now. #. (Plain busy message without title.) #: src/Printerlib.ycp:129 msgid "" "The CUPS daemon in not yet accessible.\n" "Waiting one minute so that it is ready to operate..." msgstr "" +"CUPS-dæmonen er endnu ikke tilgængelig.\n" +"Venter et minut, så den er klar til at køre..." #. Popup::Error message: #: src/Printerlib.ycp:136 src/Printerlib.ycp:184 msgid "No local running CUPS daemon is accessible." -msgstr "" +msgstr "Ingen lokalt kørende CUPS-dæmon er tilgængelig." #. Popup::ErrorDetails message: #: src/Printerlib.ycp:142 src/Printerlib.ycp:199 msgid "Failed to enable starting of the CUPS daemon during system boot" -msgstr "" +msgstr "Aktivering af start af CUPS-dæmon under system-boot fejlede" #. Enforce user confirmation before the cupsd is restarted #. to be on the safe side regarding complaints in an enterprise environment #. because a restart disrupts all currently actively printing jobs: #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:155 msgid "Restart local running CUPS daemon" -msgstr "" +msgstr "Genstart lokalt kørende CUPS-dæmon" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:157 msgid "A restart disrupts all currently actively printing jobs." -msgstr "" +msgstr "En genstart opløser alle nuværende aktive udskriftsopgaver." #. Popup::ErrorDetails message: #: src/Printerlib.ycp:164 msgid "Failed to restart the CUPS daemon" -msgstr "" +msgstr "Genstart af CUPS-dæmonen fejlede" #. Wait half a minute for a restarted cupsd is necessary because #. when a "no Browsing info" config is switched to a "get Browsing info" config #. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds #. so that the local cupsd should listen at least 31 seconds to get Browsing info #. before e.g. the Overview dialog can be shown with the right current queues. #: src/Printerlib.ycp:178 msgid "" "Restarted the CUPS daemon.\n" "Waiting half a minute so that it is ready to operate..." msgstr "" +"Genstartede CUPS-dæmonen.\n" +"Venter et halvt minut, så den er klar til at køre..." #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:192 msgid "Enable starting of the CUPS daemon during system boot" -msgstr "" +msgstr "Aktivér start af CUPS-dæmonen under system-boot" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:194 msgid "Currently the CUPS daemon is not started during system boot." -msgstr "" +msgstr "CUPS-dæmonen startes i øjeblikket ikke under system-boot." #. Enforce user confirmation before the cupsd is stopped #. to be on the safe side regarding complaints in an enterprise environment #. because a stop disrupts all currently actively printing jobs: #. PopupYesNoHeadline headline: #: src/Printerlib.ycp:214 msgid "Stop local running CUPS daemon" -msgstr "" +msgstr "Stop lokalt kørende CUPS-dæmon" #. PopupYesNoHeadline body: #: src/Printerlib.ycp:216 msgid "A stop disrupts all currently actively printing jobs." -msgstr "" +msgstr "Et stop opløser alle nuværende aktive udskriftopgaver." #. Popup::Error message: #: src/Printerlib.ycp:232 msgid "A local running CUPS daemon is still accessible." -msgstr "" +msgstr "En lokalt kørende CUPS-dæmon er stadig tilgængelig." #. When there is a non-empty client_conf_server_name, #. cups_client_only fails when the client-only server is not accessible: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/Printerlib.ycp:278 -#, fuzzy, ycp-format +#, ycp-format msgid "The CUPS server '%1' is not accessible" -msgstr "Printserveren er tilgængelig." +msgstr "CUPS-serveren '%1' er ikke tilgængelig." # #. Caption for the "Add Printer" dialog (BasicAddDialog): #: src/basicadd.ycp:48 -#, fuzzy msgid "Add New Printer Configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Tilføj ny printerkonfiguration" #. Caption for a Table with a list of printer connections: #: src/basicadd.ycp:67 -#, fuzzy msgid "Determine Connection" -msgstr "Tilslutning af USB-printer" +msgstr "Bestem tilslutning" #. Label of a PushButton to show more available printer connections #. in the Table with a list of printer connections: #: src/basicadd.ycp:101 src/basicmodify.ycp:285 -#, fuzzy msgid "&More Connections" -msgstr "Nuværende tilslutning" +msgstr "F&lere tilslutninger" #. Label of a PushButton to go to the "Connection Wizard" #. to specify the printer connection individually: #: src/basicadd.ycp:107 src/basicmodify.ycp:291 -#, fuzzy msgid "Connection &Wizard" -msgstr "Tilslutningsguide" +msgstr "Tilslutnings&guide" #. Caption for a printer driver selection: #: src/basicadd.ycp:120 src/basicadd.ycp:353 src/basicadd.ycp:404 -#, fuzzy msgid "Assign &Driver" -msgstr "Tilføj driver" +msgstr "Tildel &driver" #. Label of a PushButton to search a list for a search string #. and then show the search result: #: src/basicadd.ycp:135 src/basicmodify.ycp:319 msgid "&Show Matching Drivers" -msgstr "" +msgstr "&Vis passende drivere" # #. Printer::DriverItems( driver_filter_string, true ) #. Body of a Popup::AnyMessage when no driver was selected: #: src/basicadd.ycp:149 src/basicadd.ycp:214 src/basicadd.ycp:383 #: src/basicmodify.ycp:742 -#, fuzzy msgid "Select a driver." -msgstr "Vælg en enhed." +msgstr "Vælg en driver." #. Label of a PushButton to go to the "Add Driver" dialog #. to install a new driver (and perhaps download it before): #: src/basicadd.ycp:157 src/basicmodify.ycp:347 -#, fuzzy msgid "&Add Driver" -msgstr "Tilføj driver" +msgstr "&Tilføj driver" #. Header of a TextEntry to enter the queue name: #: src/basicadd.ycp:168 src/basicadd.ycp:371 -#, fuzzy msgid "Set &Name" -msgstr "Servernavn" +msgstr "Angiv &navn" #. Set a different label for the "next" button #. (i.e. the lower right button which results `next as UI::UserInput). #. This button finishes the "add" procedure: #: src/basicadd.ycp:182 -#, fuzzy msgid "&Finish Add" -msgstr "Færdig" +msgstr "&Færdiggør tilføjelse" #. Header of a Popup::AnyMessage when neither a connection #. nor a driver was selected: #. Header of a Popup::AnyMessage when no queue was selected from the list: #: src/basicadd.ycp:195 src/overview.ycp:239 src/overview.ycp:286 #: src/overview.ycp:380 msgid "Nothing Selected" -msgstr "" +msgstr "Intet valgt" #. Body of a Popup::AnyMessage when neither a connection #. nor a driver was selected: #: src/basicadd.ycp:198 msgid "Select a connection and then assign a driver." -msgstr "" +msgstr "Vælg en tilslutning, og tildel så en driver." #. Header of a Popup::AnyMessage when no connection was selected: #: src/basicadd.ycp:204 src/basicadd.ycp:314 src/basicmodify.ycp:602 -#, fuzzy msgid "No Connection Selected" -msgstr "Tilslutning" +msgstr "Ingen tilslutning valgt" # #. Body of a Popup::AnyMessage when no connection was selected: #: src/basicadd.ycp:206 src/basicadd.ycp:316 src/basicmodify.ycp:604 -#, fuzzy msgid "Select a connection." -msgstr "Vælg en enhed." +msgstr "Vælg en tilslutning." # #. Header of a Popup::AnyMessage when no driver was selected: #: src/basicadd.ycp:212 src/basicadd.ycp:381 src/basicmodify.ycp:740 -#, fuzzy msgid "No Driver Selected" -msgstr "Ingen server angivet" +msgstr "Ingen driver valgt" # #. Header of a Popup::AnyMessage when no queue name was entered: #: src/basicadd.ycp:221 -#, fuzzy msgid "No Queue Name" -msgstr "Kønavn" +msgstr "Ingen navn på kø" #. Body of a Popup::AnyMessage when no queue name was entered: #: src/basicadd.ycp:223 -#, fuzzy msgid "Enter a queue name." -msgstr "Angiv et gyldigt servernavn." +msgstr "Angiv et navn på køen." # #. Header of a Popup::AnyMessage when a wrong queue name was entered: #: src/basicadd.ycp:229 -#, fuzzy msgid "Invalid Queue Name" -msgstr "Kønavn" +msgstr "Ugyldigt navn på kø" #. Body of a Popup::AnyMessage when a wrong queue name was entered: #: src/basicadd.ycp:231 msgid "Only letters [A-Za-z], numbers [0-9], and '_' are allowed for the queue name." -msgstr "" +msgstr "Kun bogstaver [A-Z a-z], tal [0-9] og '_' tillades i navnet på køen." # #. Header of a Popup::ContinueCancelHeadline #. when a queue name is changed to be valid: #: src/basicadd.ycp:239 -#, fuzzy msgid "Confirm Validated Queue Name" -msgstr "Konfigurerede køer" +msgstr "Bekræft valideret navn på kø" #. Body of a Popup::ContinueCancelHeadline #. when a queue name was automatically changed to be valid #. where %1 will be replaced by the old invalid queue name #. and %2 will be replaced by a new valid queue name #: src/basicadd.ycp:244 #, ycp-format msgid "'%1' is invalid or it exists already. Use '%2' instead?" -msgstr "" +msgstr "'%1' er ugyldigt eller eksisterer allerede. Vil du bruge '%2' i stedet?" #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because before the function Printer::AddQueue #. was called and this function would have shown more specific messages. #: src/basicadd.ycp:260 #, ycp-format msgid "Failed to add queue %1." -msgstr "" +msgstr "Tilføjelse af køen %1 fejlede." #. Header of a Popup::AnyMessage when "Add Driver" was selected: #: src/basicadd.ycp:278 src/basicmodify.ycp:533 msgid "Not yet implemented" -msgstr "" +msgstr "Endnu ikke implementeret" #. Body of a Popup::AnyMessage when the "Add Driver" was selected: #: src/basicadd.ycp:280 src/basicmodify.ycp:535 msgid "The 'Add Driver' dialog is not yet implemented." -msgstr "" +msgstr "Dialogen 'Tilføj driver' er endnu ikke implementeret." # #: src/basicadd.ycp:399 src/basicmodify.ycp:789 -#, fuzzy msgid "any model" -msgstr "Skift model" +msgstr "enhver model" #. After the "Modify" text the actual queue name is appended #. so that the result is e.g. "Modify funprinter1". #. The actual queue name is a system value which cannot be translated. #: src/basicmodify.ycp:68 -#, fuzzy msgid "Modify" -msgstr "Færdig" +msgstr "Ændr" # #. Label of a PushButton to go to a dialog #. to set all available options for the printer driver #. which is currently used for a print queue: #: src/basicmodify.ycp:109 -#, fuzzy msgid "All &Options for the Current Driver" -msgstr "Udskift det aktuelle udskriftssystem" +msgstr "Alle valgmuligheder f&or denne driver" # #: src/basicmodify.ycp:178 -#, fuzzy msgid "Default Paper Size of the Current Driver" -msgstr "Standardpapir i din printer" +msgstr "Standardpapirstørrelse for denne driver" #: src/basicmodify.ycp:222 -#, fuzzy msgid "Current Connection" msgstr "Nuværende tilslutning" #. Do not change or translate "raw", it is a technical term when no driver is used. #. Do not change or translate "System V style interface script", it is a technical term. #: src/basicmodify.ycp:238 msgid "No driver is used (it is a 'raw' queue or a 'System V style interface script' is used)" -msgstr "" +msgstr "Ingen driver anvendes (det er en 'rå' kø, eller 'System V style interface script' benyttes)" #: src/basicmodify.ycp:243 -#, fuzzy msgid "Current Driver" -msgstr "Flere driver-valgmuligheder" +msgstr "Nuværende driver" #. Caption for a printer driver selection: #: src/basicmodify.ycp:304 src/basicmodify.ycp:676 src/basicmodify.ycp:794 -#, fuzzy msgid "Driver" -msgstr "Tilføj driver" +msgstr "Driver" #. Label of a TextEntry for a short printer driver description (only one line): #: src/basicmodify.ycp:358 -#, fuzzy msgid "Descri&ption" -msgstr "Beskrivelse" +msgstr "&Beskrivelse" #. Label of a TextEntry for printer location string: #: src/basicmodify.ycp:366 -#, fuzzy msgid "&Location" -msgstr "Placering" +msgstr "P&lacering" #. CheckBox to set a local print queue to be the default queue: #: src/basicmodify.ycp:375 -#, fuzzy msgid "&Default Printer" -msgstr "&Serielprinter" +msgstr "Stan&dardprinter" #. CheckBox to set a local print queue to accept print jobs: #: src/basicmodify.ycp:382 -#, fuzzy msgid "Accept Print &Jobs" -msgstr "Acceptér udskriftsopgaver" +msgstr "Acceptér udskrifts&opgaver" #. CheckBox to enable printing for a local print queue: #: src/basicmodify.ycp:389 -#, fuzzy msgid "&Enable Printing" -msgstr "Aktivér udskrift" +msgstr "&Aktivér udskrift" #. Set a different label for the "next" button #. (i.e. the lower right button which results `next as UI::UserInput). #. This button finishes the "add" procedure: #: src/basicmodify.ycp:403 -#, fuzzy msgid "&Finish Modify" -msgstr "Færdig" +msgstr "&Færdiggør ændring" # #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/basicmodify.ycp:508 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to modify %1." -msgstr "Sæt standardkø" +msgstr "Ændring af %1 fejlede." # #. Message of a Popup::ShowFeedback when nothing was changed: #: src/basicmodify.ycp:519 src/printingvianetwork.ycp:811 src/sharing.ycp:957 -#, fuzzy msgid "Nothing changed." -msgstr "Ikke delt" +msgstr "Intet ændret." #. Body of a Popup::AnyMessage when "Driver Options" was selected: #: src/basicmodify.ycp:547 msgid "Possible reasons: Nothing selected or it is a remote configuration." -msgstr "" +msgstr "Mulige årsager: Intet valgt, eller det er en ekstern konfiguration." #. TRANSLATORS: Button to test remote printer machine #: src/connectionwizard.ycp:44 src/connectionwizard.ycp:72 #: src/connectionwizard.ycp:134 src/connectionwizard.ycp:157 #: src/connectionwizard.ycp:174 -#, fuzzy msgid "&Test Connection" -msgstr "Nuværende tilslutning" +msgstr "&Test tilslutning" #. TRANSLATORS: Button to add not detected printer queue #: src/connectionwizard.ycp:46 -#, fuzzy msgid "Other" -msgstr "&Andet..." +msgstr "Andre" #. TRANSLATORS: Text entry to fill IP or hostname of remote server #. TRANSLATORS: Text entry for IP or hostname of remote server #: src/connectionwizard.ycp:60 src/connectionwizard.ycp:145 #: src/connectionwizard.ycp:163 -#, fuzzy msgid "IP Address or Host Name" -msgstr "IP-adresse" +msgstr "IP-adresse eller værtsnavn" #. TRANSLATORS: Label for menu to search for remote servers #: src/connectionwizard.ycp:62 src/connectionwizard.ycp:147 -#, fuzzy msgid "Look Up" -msgstr "&Søg efter" +msgstr "Søg efter" # #. TRANSLATORS: Buttonto search for remote servers #: src/connectionwizard.ycp:66 src/connectionwizard.ycp:151 -#, fuzzy msgid "Look Up for All Hosts" -msgstr "Søg efter &alle værtsmaskiner" +msgstr "Søg efter alle værtsmaskiner" #. TRANSLATORS: List of input field labels, first for network scan button #: src/connectionwizard.ycp:105 -#, fuzzy msgid "Scan for Direct Socket Servers" -msgstr "Søg efter &Direct Socket-servere" +msgstr "Søg efter Direct Socket-servere" #: src/connectionwizard.ycp:105 -#, fuzzy msgid "TCP Port Number" -msgstr "&TCP-portnummer" +msgstr "TCP-portnummer" # #. TRANSLATORS: List of input field labels, first for network scan button, second for name of printer queue #: src/connectionwizard.ycp:109 src/connectionwizard.ycp:139 -#, fuzzy msgid "Scan for LPD Servers" -msgstr "Søg efter &LPD-servere" +msgstr "Søg efter LPD-servere" #: src/connectionwizard.ycp:109 msgid "Queue Name (see the printer's manual)" -msgstr "" +msgstr "Navn på kø (se printerens manual)" #. TRANSLATORS: Input field label #: src/connectionwizard.ycp:114 msgid "URI (see the printer's manual)" -msgstr "" +msgstr "URI (se printerens manual)" #. TRANSLATORS: Text entry for remote server name #: src/connectionwizard.ycp:121 msgid "Server (NetBIOS Host Name)" -msgstr "" +msgstr "Server (NetBIOS-værtsnavn)" # #. TRANSLATORS: Text entry for printer name #: src/connectionwizard.ycp:123 -#, fuzzy msgid "Printer (Share Name)" -msgstr "Printermodel" +msgstr "Printer (navn på deling)" #. TRANSLATORS: Text entry for samba domain #: src/connectionwizard.ycp:125 msgid "Workgroup (Domain Name)" -msgstr "" +msgstr "Arbejdsgruppe (domænenavn)" #. TRANSLATORS: Frame label for authentication #: src/connectionwizard.ycp:127 src/connectionwizard.ycp:167 msgid "Authenticate As" -msgstr "" +msgstr "Godkend som" #. TRANSLATORS: Text entry for username (authentication) #: src/connectionwizard.ycp:129 src/connectionwizard.ycp:169 -#, fuzzy msgid "User" -msgstr "Brugere" +msgstr "Bruger" #. TRANSLATORS: Text entry for password (authentication) #: src/connectionwizard.ycp:131 src/connectionwizard.ycp:171 msgid "&Password" -msgstr "" +msgstr "&Adgangskode" #. TRANSLATORS: Text entry for name of remote printer queue #: src/connectionwizard.ycp:139 src/connectionwizard.ycp:155 #: src/connectionwizard.ycp:165 -#, fuzzy msgid "Queue Name" -msgstr "Kønavn" +msgstr "Navn på kø" # #: src/connectionwizard.ycp:149 -#, fuzzy msgid "Scan for IPP Servers" -msgstr "Søg efter &IPP-servere" +msgstr "Søg efter IPP-servere" #: src/connectionwizard.ycp:150 -#, fuzzy msgid "Scan for IPP Broadcasts" -msgstr "Lyt efter IPP-&broadcast" +msgstr "Søg efter IPP-broadcasts" #. TRANSLATORS: Text entry for URI (Uniform Resource Identifier) #: src/connectionwizard.ycp:181 msgid "URI (Uniform Resource Identifier)" -msgstr "" +msgstr "URI (Uniform Resource Identifier)" # #. TRANSLATORS: Text entry for program name that will be called via pipe #: src/connectionwizard.ycp:187 -#, fuzzy msgid "Program Name" -msgstr "&Programnavn" +msgstr "Programnavn" #. TRANSLATORS: Text entry for device URI (Uniform Resource Identifier) #: src/connectionwizard.ycp:193 msgid "Device URI (for which 'beh' should be applied)" -msgstr "" +msgstr "Enheds-URI (for hvilket 'beh' bør anvendes)" #. TRANSLATORS: Check box #: src/connectionwizard.ycp:195 -#, fuzzy msgid "Never Disable the Queue" -msgstr "Brug serverens standardkø" +msgstr "Deaktivér aldrig køen" #. TRANSLATORS: Text entry #: src/connectionwizard.ycp:197 msgid "Number of Retries ('0' means infinite retries)" -msgstr "" +msgstr "Antal genforsøg ('0' betyder uendelige genforsøg)" #. TRANSLATORS: Text entry #: src/connectionwizard.ycp:199 msgid "Delay in Seconds Between Two Retries" -msgstr "" +msgstr "Forsinkelse i sekunder mellem to genforsøg" #. TRANSLATORS: Label for tree widget description #: src/connectionwizard.ycp:221 -#, fuzzy msgid "&Connection Type" -msgstr "Tilslutning" +msgstr "&Tilslutningstype" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:224 -#, fuzzy msgid "Directly Connected Device" -msgstr "Direkte forbundne printere" +msgstr "Direkte tilsluttet enhed" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:227 -#, fuzzy msgid "Parallel Port" -msgstr "&Parallelprinter" +msgstr "Parallelport" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:229 -#, fuzzy msgid "USB Port" -msgstr "&USB-printer" +msgstr "USB-port" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:231 -#, fuzzy msgid "Serial Port" -msgstr "Indstillinger for &serielporte" +msgstr "Seriel port" #. `item(`id(`infra), _("Infrared Port (IrDA)")), #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:234 -#, fuzzy msgid "Bluetooth" -msgstr "Blue&tooth-printer" +msgstr "Bluetooth" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:236 msgid "SCSI" -msgstr "" +msgstr "SCSI" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:238 msgid "HP Devices (HPLIP)" -msgstr "" +msgstr "HP-enheder (HPLIP)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:241 msgid "Access Network Printer or Printserver Box via" -msgstr "" +msgstr "Tilgå netværksprinter eller udskriftsserverboks via" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:244 msgid "TCP Port (AppSocket/JetDirect)" -msgstr "" +msgstr "TCP-port (AppSocket/JetDirect)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:246 msgid "Line Printer Daemon (LPD) Protocol" -msgstr "" +msgstr "Linjeprinterdæmon- (LPD-) protokol" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:248 msgid "Internet Printing Protocol (IPP)" -msgstr "" +msgstr "Internetudskriftsprotokol (IPP)" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:251 -#, fuzzy msgid "Print Via Print Server Machine" -msgstr "Udskriv via &IPX-netværksserver" +msgstr "Udskrift via udskriftservermaskine" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:254 msgid "Microsoft Windows/SAMBA (SMB/CIFS)" -msgstr "" +msgstr "Microsoft Windows/SAMBA (SMB/CIFS)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:256 msgid "Traditional UNIX Server (LPR)" -msgstr "" +msgstr "Traditionel UNIX-server (LPR)" # #. `item(`id(`iprint), _("iPrint (Novell OES)")), #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:259 -#, fuzzy msgid "CUPS Server" -msgstr "CUPS serverindstillinger" +msgstr "CUPS-server" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:261 msgid "Novell Netware Print Server (IPX)" -msgstr "" +msgstr "Novell Netware Print Server (IPX)" # #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:264 -#, fuzzy msgid "Special" -msgstr "Indstillinger for serielporte" +msgstr "Speciel" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:267 msgid "Specify Arbitrary Device URI" -msgstr "" +msgstr "Angiv tilfældig enheds-URI" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:269 msgid "Send Print Data to Other Program (pipe)" -msgstr "" +msgstr "Send udskriftsdata til andet program (pipe)" #. TRANSLATORS: Tree widget item #: src/connectionwizard.ycp:271 msgid "Daisy-chain Backend Error Handler (beh)" -msgstr "" +msgstr "Fejlhåndtering for Daisy-chain-backend (beh)" # #. TRANSLATORS: Connection details widget #: src/connectionwizard.ycp:278 -#, fuzzy msgid "Connection Settings" -msgstr "Begrænsningsindstillinger" +msgstr "Tilslutningsindstillinger" #. TRANSLATORS: Connection wizard header #: src/connectionwizard.ycp:285 -#, fuzzy msgid "Connection Wizard" msgstr "Tilslutningsguide" # #: src/dialogs.ycp:52 -#, fuzzy msgid "Driver Options for Queue" -msgstr "Driver-valgmuligheder" +msgstr "Driver-valgmuligheder for kø" #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/dialogs.ycp:115 #, ycp-format msgid "Failed to set driver options for queue %1." -msgstr "" +msgstr "Opsætning af driver-valgmuligheder for køen %1 fejlede." #: src/dialogs.ycp:166 msgid "Specify in which way USB printers are configured automatically" -msgstr "" +msgstr "Angiver på hvilken måde USB-printere konfigureres automatisk." # #: src/dialogs.ycp:167 -#, fuzzy msgid "Enable &Automatic Configuration of New Printers" -msgstr "Konfigurationsoversigt for printere" +msgstr "Aktivér &automatisk konfiguration af nye printere" #: src/dialogs.ycp:168 msgid "&Disable Printout when Disconnecting USB Printer" -msgstr "" +msgstr "&Deaktivér udskrift når USB-printer frakobles" #: src/dialogs.ycp:169 msgid "The name of the CUPS &policy to assign to newly configured printers" -msgstr "" +msgstr "Navnet på CUPS-&politikken der tildeles nyligt konfigurerede printere" #: src/dialogs.ycp:211 -#, fuzzy msgid "Specify the operation policy" -msgstr "Handlingspolitik" +msgstr "Angiv handlingspolitikken" #: src/dialogs.ycp:212 -#, fuzzy msgid "The operation &policy" -msgstr "Handlingspolitik" +msgstr "Handlings&politikken" # #: src/dialogs.ycp:296 src/dialogs.ycp:297 -#, fuzzy msgid "Printer Configurations" -msgstr "Gemmer printerkonfiguration" +msgstr "Printer-konfigurationer" # #: src/dialogs.ycp:304 src/dialogs.ycp:305 -#, fuzzy msgid "Print via Network" -msgstr "Udskriv via &SMB-netværksserver" +msgstr "Udskrift via netværk" #: src/dialogs.ycp:312 src/dialogs.ycp:313 -#, fuzzy msgid "Share Printers" -msgstr "Del printer" +msgstr "Del printere" # #: src/dialogs.ycp:328 src/dialogs.ycp:329 -#, fuzzy msgid "Autoconfig Settings" -msgstr "Søgeindstillinger" +msgstr "Konfigurér indstillinger automatisk" #. Read dialog help 1/1: #: src/helps.ycp:42 msgid "" "<p>\n" "<b><big>Initializing printer Configuration</big></b><br>\n" "Please wait...<br>\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Initialiserer konfiguration af printer</big></b><br>\n" +"Vent venligst...<br>\n" +"</p>" #. Write dialog help 1/1: #: src/helps.ycp:49 msgid "" "<p>\n" "<b><big>Finishing printer Configuration</big></b><br>\n" "Please wait...<br>\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Færdiggør konfiguration af printer</big></b><br>\n" +"Vent venligst...<br>\n" +"</p>" #. Overview dialog help 1/7: #: src/helps.ycp:56 msgid "" "<p>\n" "<b><big>Print Queue Overview</big></b><br>\n" "A printer device is not used directly but via a print queue.<br>\n" "When various application programs submit print jobs simultaneously,\n" "the jobs queue up and are sent one after the other to the printer device.<br>\n" "It is possible to have several different print queues for the same printer device.\n" "For example a second queue with a monochrome-only driver for a color device\n" "or a PostScript queue and a queue with a PCL driver for a PostScript+PCL printer.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Oversigt over udskriftskøer</big></b><br>\n" +"En udskriftsenhed bruges ikke direkte, men via en udskriftskø.<br>\n" +"Når forskellige programmer tildeler udskriftsopgaver samtidigt,\n" +"sættes opgaverne i en kø og sendes en af gangen til udskriftsenheden.<br>\n" +"Det er muligt, at have flere forskellige udskriftskøer til samme udskriftsenhed.\n" +"For eksempel en anden kø med kun-monokrom driver til en farveenhed eller en\n" +"PostScript-kø og en kø med en PCL-driver til en PostScript+PCL-printer.\n" +"</p>" #. Overview dialog help 2/7: #: src/helps.ycp:66 msgid "" "<p>\n" "<b><big>Using Remote Queues:</big></b><br>\n" "Remote queues exist on other hosts in the network\n" "and therefore they cannot be changed on this host.<br>\n" "The remote queues which are listed here are known on this host\n" "and usually they can be used directly by application programs\n" "so that there is no need to set up a local queue for a printer\n" "which is already available via a remote queue.<br>\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Anvendelse af eksterne køer:</big></b><br>\n" +"Eksterne køer findes på andre værter i netværket,\n" +"og derfor kan de ikke ændres på denne vært.<br>\n" +"De eksterne køer, der vises her, kendes på denne vært,\n" +"og kan normalt bruges direkte af de anvendte programmer,\n" +"så det er ikke nødvendigt at sætte en lokal kø op for en\n" +"printer, der allerede er tilgængelig via en ekstern kø.<br>\n" +"</p>" #. Overview dialog help 3/7: #: src/helps.ycp:76 -#, fuzzy msgid "" "<p>\n" "<b><big>Configure a printer:</big></b><br>\n" "Press <b>Add</b> to set up a new queue for a printer device.\n" "</p>" msgstr "" -"<p><b><big>Del printer</big></b><br>\n" -"Disse valgmuligheder giver mulighed for at dele printere via netværket.\n" +"<p>\n" +"<b><big>Konfigurér en printer:</big></b><br>\n" +"Tryk på <b>Tilføj</b> for at sætte en ny kø op for en udskriftsenhed.\n" "</p>" #. Overview dialog help 4/7: #: src/helps.ycp:81 -#, fuzzy msgid "" "<p>\n" "<b><big>Change the settings for a queue:</big></b><br>\n" "Select a local queue and press <b>Configure</b>.\n" "</p>" msgstr "" -"<p><b><big>Vælge model</big></b><br>\n" -"For at vælge printermodel i stedet for en PPD-fil, klik\n" -"<b>Vælg model</b>.</p>\n" +"<p>\n" +"<b><big>Ændre indstillinger for en kø:</big></b><br>\n" +"Vælg en lokal kø og tryk på <b>Konfigurér</b>.\n" +"</p>" #. Overview dialog help 5/7: #: src/helps.ycp:86 -#, fuzzy msgid "" "<p>\n" "<b><big>Remove a queue:</big></b><br>\n" "Select a local queue and press <b>Delete</b>.\n" "</p>" msgstr "" -"<p><b><big>Vælge model</big></b><br>\n" -"For at vælge printermodel i stedet for en PPD-fil, klik\n" -"<b>Vælg model</b>.</p>\n" +"<p>\n" +"<b><big>Fjerne en kø:</big></b><br>\n" +"Vælg en lokal kø og tryk på <b>Slet</b>.\n" +"</p>" #. Overview dialog help 6/7: #: src/helps.ycp:91 -#, fuzzy msgid "" "<p>\n" "<b><big>Print a test page:</big></b><br>\n" "Select the queue and press <b>Print Test Page</b>.\n" "</p>" msgstr "" -"<p><b><big>Vælge model</big></b><br>\n" -"For at vælge printermodel i stedet for en PPD-fil, klik\n" -"<b>Vælg model</b>.</p>\n" +"<p>\n" +"<b><big>Udskrive en testside:</big></b><br>\n" +"Vælg køen og tryk på <b>Udskriv testside</b>.\n" +"</p>" #. Overview dialog help 7/7: #: src/helps.ycp:96 msgid "" "<p>\n" "<b><big>Refresh the list of queues:</big></b><br>\n" "In particular after changes regarding printing via network\n" "the available remote queues may have changed.\n" "Usually it takes some time (up to several minutes)\n" "until such changes become known to the local host\n" "so that it is useful to press <b>Refresh List</b>\n" "after some time to get an up-to-date list\n" "of available remote queues.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Genopfriske listen over køer:</big></b><br>\n" +"Særligt efter ændringer vedr. udskrift over netværk\n" +"kan de tilgængelige eksterne køer være ændrede.\n" +"Normalt tager det noget tid (op til flere minutter),\n" +"før sådanne ændringer kendes af den lokale vært.\n" +"Det er således nyttigt at trykke på <b>Genopfrisk liste</b>\n" +"efter et stykke tid for at få en ajourført liste over\n" +"tilgængelige eksterne køer.\n" +"</p>" #. BasicAddDialog help 1/5: #: src/helps.ycp:109 msgid "" "<p>\n" "<b><big>Set Up a New Queue for a Printer Device</big></b><br>\n" "A printer device is not used directly but via a print queue.<br>\n" "When various application programs submit print jobs simultaneously,\n" "the jobs queue up and are sent one after the other to the printer device.<br>\n" "It is possible to have several different print queues for the same printer device.\n" "Usually several print queues are needed when several different printer drivers\n" "should be used for the same printer device.\n" "For example a second queue with a monochrome-only driver\n" "to enforce black-only printout on a color device\n" "or a PostScript queue and a queue with a PCL driver for a PostScript+PCL printer\n" "because printing via the PCL driver is usally faster (but with less quality).\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Sæt en ny kø op til en printer-enhed</big></b><br>\n" +"En printer bruges ikke direkte, men via en udskriftskø.<br>\n" +"Når flere programmer tildeler udskriftsopgaver samtidigt, sættes\n" +"opgaverne i kø og sendes en ad gangen til printeren.<br>\n" +"Det er muligt, at have flere forskellige udskriftskøer til den samme printer.\n" +"Flere udskriftskøer er normalt nødvendige, når der skal benyttes flere\n" +"printer-drivere til den samme printer-enhed.\n" +"Det kan f.eks. være en udelukkende monokrom driver for at gennemtvinge\n" +"sort/hvide udskrifter på en farveprinter, eller en PostScript-kø og en\n" +"PCL-driver til en PostScript+PCL-printer, da udskrift via PCL-\n" +"driveren normalt er hurtigere (men med dårligere kvalitet).\n" +"</p>" #. BasicAddDialog help 2/5: #: src/helps.ycp:123 msgid "" "<p>\n" "To set up a new queue:<br>\n" "Select the connection of the matching printer device,<br>\n" "find and assign a suitable printer driver, and<br>\n" "set a unique queue name.\n" "</p>" msgstr "" +"<p>\n" +"At sætte en ny kø op:<br>\n" +"Vælg den matchende printers tilslutning,<br>\n" +"find og tildel en passende printer-driver, og<br>\n" +"angiv et unikt navn på køen.\n" +"</p>" #. BasicAddDialog help 3/5: #. BasicModifyDialog help 2/4: #: src/helps.ycp:130 src/helps.ycp:165 msgid "" "<p>\n" "The <b>connection</b> determines which way data is sent to the printer device.<br>\n" "If a wrong connection is selected, no data can be sent to the device\n" "so that there cannot be any printout.<br>\n" "If a printer device is accessible via more than one connection type,\n" "it is shown for each connection type.<br>\n" "In particular HP devices are often accessible both via the 'usb:/...'\n" "and the 'hp:/...' connection.\n" "The latter is provided by the HP driver package 'hplip'.\n" "For plain printing both kind of connections should work but for anything else\n" "(e.g. device status via 'hp-toolbox', or scanning with a HP all-in-one device)\n" "the 'hp:/...' connection must be used.\n" "</p>" msgstr "" +"<p>\n" +"<b>Tilslutningen</b> bestemmer, hvilken vej data sendes til printer-enheden.<br>\n" +"Hvis en forkert tilslutning vælges, kan ingen data sendes til enheden,\n" +"og der kan således ikke udskrives.<br>\n" +"Hvis en printer-enhed kan tilgås via mere end én tilslutningstype,\n" +"vises den for hver tilslutningstype.<br>\n" +"Særligt HP-enheder kan ofte tilgås via både 'usb:/...'- og 'hp:/...'-\n" +"tilslutningen.\n" +"Den sidste tilbydes af HP driver-pakken 'hplip'.\n" +"Begge slags tilslutninger skulle virke til almindelig udskrift, men til alt\n" +"muligt andet (f.eks. enhedsstatus via 'hp-toolbox', eller scanning med en HP\n" +"all-in-one-enhed skal 'hp:/...'-tilslutningen benyttes.\n" +"</p>" #. BasicAddDialog help 4/5: #: src/helps.ycp:144 msgid "" "<p>\n" "The <b>driver</b> determines that the right data is produced for the\n" "specific printer model.<br>\n" "If a wrong driver is assigned, wrong data is sent to the printer\n" "which results bad looking printout, chaotic printout, or no printout at all.\n" "</p>" msgstr "" +"<p>\n" +"<b>Driveren</b> bestemmer, at den rigtige data produceres til den\n" +"angivne printer-model.<br>\n" +"Hvis en forkert driver tildeles, sendes forkert data til printeren, hvilket\n" +"resulterer i dårligt udseende, kaotisk eller slet ingen udskrift.\n" +"</p>" #. BasicAddDialog help 5/5: #: src/helps.ycp:151 msgid "" "<p>\n" "Application programs do not show the actual printer device\n" "but its associated <b>queue name</b>.<br>\n" "Only letters [A-Za-z], numbers [0-9], and the underscore '_'\n" "are allowed for the queue name and it must start with a letter.\n" "</p>" msgstr "" +"<p>\n" +"Applikationsprogrammer viser ikke den faktiske printer-enhed\n" +"men dens associerede <b>navn på køen</b>.<br>\n" +"Kun bogstaver [A-Z a-z], tal [0-9] og bundstreg '_'\n" +"er tilladt i navne på køer, og det skal starte med et bogstav.\n" +"</p>" #. BasicModifyDialog help 1/4: #: src/helps.ycp:160 msgid "" "<p>\n" "<b><big>Modify a Print Queue</big></b><br>\n" "To modify a queue, select only what you really want to be changed.<br>\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Ændre en udskriftskø</big></b><br>\n" +"Vælg kun det, du virkelig vil have ændret, for at ændre en kø.<br>\n" +"</p>" #. BasicModifyDialog help 3/4: #: src/helps.ycp:179 msgid "" "<p>\n" "The <b>driver</b> determines that the right data is produced for the\n" "specific printer model.<br>\n" "If a wrong driver is assigned, wrong data is sent to the printer\n" "which results bad looking printout, chaotic printout, or no printout at all.<br>\n" "You can either select another driver and modify its driver option settings later\n" "or keep the currently used driver and modify its driver option settings now.<br>\n" "Some driver option settings must match to your particular printer.\n" "For example the default paper size setting of the driver\n" "must match to the paper which is actually loaded in your printer.<br>\n" "For other driver option settings you can choose what you like.\n" "For example any choice of the available printing resolutions\n" "should work for the particular driver.\n" "Nevertheless it may happen that your particular printer fails to print\n" "with high resolution. For example when you have a laser printer\n" "which has insufficient built-in memory to process high resolution pages.\n" "</p>" msgstr "" +"<p>\n" +"<b>Driveren</b> sørger for, at de rette data produceres til den\n" +"angivne printer-model.<br>\n" +"Hvis en forkert driver tildeles, sendes forkerte data til printeren, hvilket\n" +"resulterer i dårligt udseende, kaotisk eller slet ingen udskrift.<br>\n" +"Du kan enten vælge en anden driver, og senere ændre opsætningen af\n" +"driver-valgmulighederne, eller beholde den nuværende driver og ændre\n" +"dens opsætning af driver-valgmulighederne nu.<br>\n" +"Nogle indstillinger i driver-valgmulighederne skal passe til den enkelte printer.\n" +"Opsætning af driverens standard-papirstørrelse skal f.eks. matche det papir,\n" +"der faktisk er lagt i printeren.<br>\n" +"Til andre indstillinger af driver valgmuligheder kan du vælge, hvad du har\n" +"lyst til. For eksempel skulle ethvert valg af udskriftsopløninger fungere\n" +"for den enkelte .\n" +"Dog kan det hænde, at din egen printer fejler i udskrift med høj opløsning,\n" +"hvis du f.eks. har en laser-printer, der ikke har den fornødne indbyggede\n" +"hukommelse til at bearbejde sider med høj opløsning.\n" +"</p>" #. BasicModifyDialog help 4/4: #: src/helps.ycp:197 msgid "" "<p>\n" "In contrast to connection and driver where you must select the right one,\n" "you are free to enter arbitrary strings for <b>description</b> and <b>location</b>.\n" "Application programs often show description and location in the print dialog.\n" "To make sure that those strings look correct in any language\n" "which a particular user of a particular application program may use,\n" "it is safe when you use only plain text without special characters\n" "(e.g. only letters [A-Za-z], numbers [0-9], and spaces).\n" "Usually the description describes the model and optionally the driver\n" "(e.g. 'ACME FunPrinter 1000 using generic PCL driver')\n" "and the location describes where the printer is located\n" "(e.g. 'Room 123' or 'Front Desk').\n" "</p>" msgstr "" +"<p>\n" +"Modsat tilslutning og driver, hvor du skal vælge den rigtige, kan du frit\n" +"angive vilkårlige strenge for <b>beskrivelse</b> og <b>placering</b>.\n" +"Applikationsprogrammerne viser ofte beskrivelse og placering i\n" +"udskriftdialogen.\n" +"Det er bedst kun at benytte ren tekst og uden specielle tegn (f.eks kun\n" +"bogstaver [A-Z a-z] og tal [0-9] og mellemrum) for at sikre, at disse\n" +"strenge ser rigtige ud på ethvert sprog, som en applikationsbruger\n" +"måte anvende.\n" +"Normalt beskriver beskrivelsen modellen og evt. driveren (som f.eks.\n" +"'ACME FunPrinter 1000 med generic PCL-driver'), ligesom placering\n" +"beskriver, hvor printeren er placeret (f.eks. 'Rum 123' eller 'Reception').\n" +"</p>" #. DriverOptionsDialog help 1/3: #: src/helps.ycp:213 msgid "" "<p>\n" "<b><big>Set Driver Options</big></b><br>\n" "Usually it is best to leave the driver defaults because\n" "the defaults should be reasonable for usual printing.<br>\n" "Additionally the print dialogs in usual application programs\n" "show the driver options too so that each user can specify\n" "driver options for each individual printout.<br>\n" "The only setting which should be checked in any case is the paper size\n" "which must be set to what is actually used by default in the printer.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Indstil valgmuligheder for driver</big></b><br>\n" +"Normalt er det bedst blot at benytte standardindstillingerne for\n" +"driveren, da disse burde være udmærkede til alm. udskrift.<br>\n" +"Yderligere viser udskriftdialogen i almindelige applikations-\n" +"programmer valgmulighederne for driveren, så hver bruger kan\n " +"angive disse for hvert enkelt udskrift.<br>\n" +"Den eneste indstilling, der skal tjekkes i hvert enkelt tilfælde, er\n" +"papirstørrelsen, der skal sættes til den, der faktisk benyttes som\n" +"standard i printeren.\n" +"</p>" #. DriverOptionsDialog help 2/3: #: src/helps.ycp:224 msgid "" "<p>\n" "Non-default settings may not work in any case or have unexpected consequences.<br>\n" "For example a high resolution setting may not work for a laser printer\n" "when its default built-in memory is insufficient to process high resolution pages.<br>\n" "Or a high quality setting may print intolerable slow on an inkjet printer.\n" "</p>" msgstr "" +"<p>\n" +"Ikke-standardindstillinger virker måske slet ikke eller har uventede konsekvenser.<br>\n" +"For eksempel virker en for højt sat opløsning måske ikke for en laser-printer, hvis den\n" +"standard indbyggede hukommelse er utilstrækkelig til at behandle sider med høj opløsning.<br>\n" +"Eller en højkvalitets indstilling gør udskrift utåleligt langsom på en inkjet-printer\n" +"</p>" #. DriverOptionsDialog help 3/3: #: src/helps.ycp:231 msgid "" "<p>\n" "On the other hand in certain cases printer-specific driver settings\n" "must be adjusted to get the full functionality of a printer.<br>\n" "In particular when the printer has optional units installed like\n" "duplex unit or optional paper feeders, the matching driver settings\n" "should be checked and adjusted.<br>\n" "For example a duplex unit option must be set to 'installed' or 'true'\n" "otherwise the driver may ignore duplex printing option settings.\n" "</p>" msgstr "" +"<p>\n" +"På den anden side set skal specifikke driver-indstillinger justeres\n" +"for at opnå den fulde funktionalitet af en printer.<br>\n" +"Specielt, hvis printeren har valgfrie elementer installeret som\n" +"'duplex unit' eller valgfrie papirfødere, skal de passende driver-\n" +"indstillinger markeres og justeres.<br>\n" +"For eksempel skal duplex-elementet sættes til 'installed' eller 'true',\n" +"ellers kan printeren evt. ignorere opsætningen af duplex-udskrift.\n" +"</p>" #. ConnectionWizardDialog help 1/6: #: src/helps.ycp:243 msgid "" "<p>\n" "<b><big>Specify the Connection</big></b><br>\n" "The <b>connection</b> determines which way data is sent to the printer device.<br>\n" "If a wrong connection is used, no data can be sent to the device\n" "so that there cannot be any printout.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Angiv tilslutningen</big></b><br>\n" +"<b>Tilslutningen</b> bestemmer, hvilken vej data sendes til printer-enheden.<br>\n" +"Hvis en forkert tilslutning anvendes, kan ingen data sendes til enheden,\n" +"således bliver der heller ikke nogen udskrift.\n" +"</p>" #. ConnectionWizardDialog help 2/6: #: src/helps.ycp:250 #, ycp-format msgid "" "<p>\n" "<b><big>Printer Device URI</big></b><br>\n" "A connection is specified as so called <b>device URI</b>.<br>\n" "Its first word (the so called URI scheme) specifies the kind of data-transfer,\n" "for example 'parallel', 'usb', 'socket', 'lpd', or 'ipp'.<br>\n" "After the scheme there are more or less additional parts\n" "(separated by slash '/' characters) which specify the details\n" "for this kind of data-transfer.<br>\n" "Finally there could be optional parameters (separated by a question mark '?')\n" "of the form option1=value1&option2=value2&option3=value3 so that\n" "a full device URI could be for example:<br>\n" "ipp://server.domain:631/printers/queuename?waitjob=false&waitprinter=false<br>\n" "Special characters must be percent-encoded (also known as URL encoding).\n" "For example a space character ' ' must be written as '%20'\n" "and a plus sign '+' must be written as '%2B'.<br>\n" "Some examples:<br>\n" "A USB printer model 'Fun Printer 1000+' made by 'ACME'\n" "with serial number 'A1B2C3' may have a device URI like:<br>\n" "usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3<br>\n" "A network printer with IP 192.168.100.1 which is accessible\n" "via port 9100 may have a device URI like:<br>\n" "socket://192.168.101.202:9100<br>\n" "A network printer with IP 192.168.100.2 which is accessible\n" "via LPD protocol with a remote LPD queue name 'lpt1'\n" "may have a device URI like:<br>\n" "lpd://192.168.100.2/lpt1\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Printer-enhedens URI</big></b><br>\n" +"En tilslutning angives som et såkaldt <b>enheds-URI</b>.<br>\n" +"Dets første ord (det såkaldte URI-skema) angiver typen af dataoverførsel,\n" +"for eksempel 'parallel', 'usb', 'socket', 'lpd' eller 'ipp'.<br>\n" +"Efter skemaet er der flere eller færre yderligere dele (adskilt med\n" +"skråstreger '/'), som angiver detaljerne for denne type dataoverførsel.<br>\n" +"Til sidst kan der være valgfrie parametre (adskilt med et spørgsmålstegn '?')\n" +"i form af valgmulighed1=værdi1&valgmulighed2=værdi2&valgmulighed3=\n" +"værdi3 således at en fuld enheds-URI f.eks. kan være:<br>\n" +"ipp://server.domæne:631/printere/kønavn?waitjob=false&waitprinter=false<br>\n" +"Specielle tegn skal være procent-kodet (også kendt som URL-kodning).\n" +"Et mellemrum ' 'skal f.eks. skrives som '%20',\n" +"og et plus-tegn '+' skal skrives som '%2B'.<br>\n" +"Nogle eksempler:<br>\n" +"En USB-printer model 'Fun Printer 1000+' produceret af 'ACME'\n" +"med serienummer 'A1B2C3' kan have denne enheds-URI:<br>\n" +"usb://ACME/Fun%20Printer%201000%2B?serial=A1B2C3<br>\n" +"En netværksprinter med IP 192.168.100.1, der er tilgængelig\n" +"via port 9100, kan have denne enheds-URI:<br>\n" +"socket://192.168.101.202:9100<br>\n" +"En netværksprinter med IP 192.168.100.2 der er tilgængelig\n" +"via LPD-protokol med det eksterne LPD-kønavn 'lpt1'\n" +"kan have denne enheds-URI:<br>\n" +"lpd://192.168.100.2/lpt1\n" +"</p>" #. ConnectionWizardDialog help 3/6: #: src/helps.ycp:278 msgid "" "<p>\n" "<b><big>Device URIs for Directly Connected Devices</big></b><br>\n" "Devices which are connected via the parallel port or via USB\n" "are autodetected and the appropriate device URI is autogenerated.\n" "For example:<br>\n" "parallel:/dev/lp0<br>\n" "usb://ACME/FunPrinter<br>\n" "hp:/usb/HP_LaserJet?serial=1234<br>\n" "Usually only the autogenerated device URIs work.\n" "When the device is not autodetected, there is usually no communication\n" "with the device possible and no data can be sent to the device.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Enheds-URI'er for direkte tilsluttede enheder</big></b><br>\n" +"Enheder, som er tilsluttet via parallelport eller via USB, findes\n" +"automatisk, og den passende enheds-URI genereres automatisk.\n" +"For eksempel:<br>\n" +"parallel:/dev/lp0<br>\n" +"usb://ACME/FunPrinter<br>\n" +"hp:/usb/HP_LaserJet?serial=1234<br>\n" +"Normalt er det kun den automatisk genererede enheds-URI, der virker.\n" +"Hvis enheden ikke findes automatisk, er der normalt ingen mulig\n" +"kommunikation med enheden, og ingen data kan sendes til enheden.\n" +"</p>" #. ConnectionWizardDialog help 4/6: #: src/helps.ycp:291 msgid "" "<p>\n" "<b><big>Device URIs to Access a Network Printer or a Printserver Box</big></b><br>\n" "A printserver box is a small device with a network connection\n" "and a USB or parallel port connection to connect the actual printer.\n" "A network printer has such kind of device built-in.\n" "Access happens via three different network protocols.\n" "See the manual of your network printer or printserver box\n" "what your particular device supports:<br>\n" "<b>TCP Port (AppSocket/JetDirect)</b><br>\n" "The IP address and a port number is needed to access it.\n" "Often the port number 9100 is the right one.\n" "It is the simplest, fastest, and generally the most reliable protocol.\n" "The matching device URI is:<br>\n" "socket://ip-address:port-number<br>\n" "<b>Line Printer Daemon (LPD) Protocol</b><br>\n" "A LPD runs on the device and provides one or more LPD queues.\n" "The IP address and a LPD queue name is needed to access it.\n" "Almost all network printers and printserver boxes support it.\n" "Often an arbitrary queue name or 'LPT1' works somehow.\n" "But using a correct LPD queue which does not somehow change\n" "the data or add additional formfeeds or banner pages\n" "could be essential for reliable printing.\n" "The matching device URI is:<br>\n" "lpd://ip-address/queue<br>\n" "<b>Internet Printing Protocol (IPP)</b><br>\n" "IPP is the native protocol for CUPS which runs on a real computer\n" "but when IPP is implemented in a small printserver box,\n" "it is often not implemented properly. Only use IPP when the vendor\n" "actually documents official support for it. \n" "The matching device URI is:<br>\n" "ipp://ip-address:port-number/resource<br>\n" "What 'port-number' and 'resource' exactly is depends totally\n" "on the particular network printer or printserver box model.<br>\n" "For <b>more information</b> have a look at<br>\n" "http://www.cups.org/documentation.php/network.html\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Enheds-URIer for adgang til en netværksprinter eller en printserverboks</big></b><br>\n" +"En printserverboks er en lille enhed med en netværkstilslutning samt\n" +"en USB- eller parallelport for tilslutning til den egentlige printer.\n" +"En netværksprinter har sådan en type enhede indbygget.\n" +"Adgang sker via tre forskellige netværksprotokoller.\n" +"Se i din netværksprinters eller printserverboks' manual,\n" +"hvad din egen enhed understøtter:<br>\n" +"<b>TCP-port (AppSocket/JetDirect)</b><br>\n" +"IP-adressen og portnummer skal bruges for at tilgå den.\n" +"Ofte er port nummer 9100 den rette.\n" +"Det er den enkleste, hurtigste og generelt mest troværdige protokol.\n" +"Den matchende enheds-URI er:<br>\n" +"sokkel://ip-adresse:portnummer<br>\n" +"<b>LPD-protokol (Line Printer Daemon)</b><br>\n" +"En LPD kører på enheden og tilbyder en eller flere LPD-køer.\n" +"IP-adresse og et LPD-kønavn skal bruges for at tilgå den.\n" +"Næsten alle entværksprintere og printserverbokse understøtter den.\n" +"Ofte kan et vilkårligt kønavn eller 'LPT1' fungere.\n" +"Men at benytte en korrekt LPD-kø, der ikke på nogen måde ændrer\n" +"data, tilføjer yderligere sideskift eller skilleark, kan være essentiel\n" +"for en troværdig udskrift.\n" +"Den passende enheds-URI er:<br>\n" +"lpd://ip-adresse/kø<br>\n" +"<b>IPP (Internet Printing Protocol)</b><br>\n" +"IPP er den oprindelige protokol for CUPS, som kører på en reel computer.\n" +"Men hvor IPP er implementeret i en lille printserverboks, er det ofte\n" +"ikke implementeret ordentligt. Brug kun IPP, når producenten\n" +"reelt dokumenterer understøttelse af den. \n" +"Den passende enheds-URI er:<br>\n" +"ipp://ip-adresse:portnummer/ressource<br>\n" +"Hvad 'portnummer' og 'ressource' nøjagtigt er afhænger af\n" +"den enkelte netværksprinter- eller printserverboks-model.<br>\n" +"For <b>mere information</b> kig på<br>\n" +"http://www.cups.org/documentation.php/network.html\n" +"</p>" #. ConnectionWizardDialog help 5/6: #: src/helps.ycp:328 msgid "" "<p>\n" "<b><big>Device URIs to Print Via a Print Server Machine</big></b><br>\n" "In contrast to a printserver box a print server machine\n" "means a real computer which offers a print service.<br>\n" "Access happens via various different network protocols.\n" "Ask your network administrator what which print server machine\n" "provides in your particular network:<br>\n" "<b>Microsoft Windows/SAMBA (SMB/CIFS)</b><br>\n" "A server name and a printer share name and optionally a workgroup name\n" "is needed to access it.\n" "Furthermore a user name and a password may be required to get access.\n" "A matching full device URI is:<br>\n" "smb://username:password@workgroup/server/printer<br>\n" "For <b>more information</b> have a look at <tt>man smbspool</tt> and<br>\n" "http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share<br>\n" "<b>Traditional UNIX Server (LPR)</b><br>\n" "A Line Printer Daemon (LPD) runs on a traditional UNIX server\n" "and provides one or more LPD queues.\n" "The IP address and a LPD queue name is needed to access it.\n" "The matching device URI is:<br>\n" "lpd://ip-address/queue<br>\n" "<b>CUPS Server</b><br>\n" "Usually you should not set up a local print queue to access\n" "a remote queue on a CUPS server. Instead do the setup\n" "in the <b>Print Via Network</b> dialog.\n" "Only if you really know that you must set up a local print queue\n" "to access a remote queue on a CUPS server proceed here.<br>\n" "IPP is the native protocol for CUPS which runs on a server.\n" "The official IANA port for IPP is 631.\n" "The matching device URI is:<br>\n" "ipp://ip-address:631/printers/queue<br>\n" "<b>Novell Netware Print Server (IPX)</b><br>\n" "To access print queues on a Novell Netware print server,\n" "the RPM package ncpfs must be installed.\n" "The package provides the CUPS backend 'novell' which runs\n" "the <tt>nprint</tt> program which actually sends the data\n" "to a Novell Netware print queue.\n" "A server name and a printer queue name is needed to access it.\n" "Furthermore a user name and a password may be required to get access.\n" "The matching device URI is:<br>\n" "novell://username:password@server/queue<br>\n" "For <b>more information</b> have a look at <tt>man nprint</tt> and\n" "the other documentation in the RPM package ncpfs.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Enheds-URIer til udskrift via en udskriftservermaskine</big></b><br>\n" +"I modsætning til en printserverboks er en printservermaskine\n" +"en reel computer, der tilbyder en udskrifttjeneste.<br>\n" +"Adgang foregår via flere forskellige netværksprotokoller.\n" +"Spørg din netværksadministrator, hvad hvilken printservermaskine\n" +"tilbyder på dit netværk:<br>\n" +"<b>Microsoft Windows/SAMBA (SMB/CIFS)</b><br>\n" +"For at tilgå dette kræves et servernavn, en printerdelingsnavn og\n" +"valgfrit et navn på en arbejdsgruppe.\n" +"Ydermere kan der kræves et brugernavn og en adgangskode for tilgang.\n" +"En passende komplet enheds-URI er:<br>\n" +"smb://brugernavn:adgangskode@arbejdsgruppe/server/printer<br>\n" +"For <b>mere information</b> kig på <tt>man smbspool</tt> og<br>\n" +"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share<br>\n" +"<b>Traditionel UNIX-server (LPR)</b><br>\n" +"En linjeprinterdæmon (LPD) kører på en traditionel UNIX-server\n" +"og tilbyder en eller flere LPD-køer.\n" +"Der kræves en IP adresse og et LPD-kønavn for at tilgå det.\n" +"Den passende enheds-URI er:<br>\n" +"lpd://ip-adresse/kø<br>\n" +"<b>CUPS-server</b><br>\n" +"Normalt skal du ikke sætte en lokal udskriftskø op for at tilgå\n" +"en ekstern kø på en CUPS-server. Lav i stedet opsætningen\n" +"i dialogen <b>Udskrift via netværk</b>.\n" +"Fortsæt kun her, hvis du er sikker på, at du skal sætte en lokal\n" +"udskriftskø op for at tilgå en ekstern kø på en CUPS-server.<br>\n" +"IPP er den opringdelige protokol for CUPS, der kører på en server.\n" +"Den officielle IANA-port til IPP er 631.\n" +"Den passende enheds-URI er:<br>\n" +"ipp://ip-adresse:631/printers/kø<br>\n" +"<b>IPX (Novell Netware Print Server)</b><br>\n" +"RPM-pakken ncpfs skal installeres for at tilgå udskriftskøer på\n" +"en Novell Netware printserver.\n" +"Pakken levereren CUPS-backend - 'novell' - der kører programmet\n" +"<tt>nprint</tt>, der faktisk sender dataene til en Novell\n" +"Netware udskriftskø.\n" +"Der kræves servernavn og navn på udskriftskø for at få adgang.\n" +"Ydermere kan der kræves et brugernavn og en adgangskode for tilgang.\n" +"Den passende enheds-URI er:<br>\n" +"novell://brugernavn:adgangskode@server/kø<br>\n" +"For <b>mere information</b> kig på <tt>man nprint</tt> og\n" +"den anden dokumentation i RPM-pakken ncpfs.\n" +"</p>" #. ConnectionWizardDialog help 6/6: #: src/helps.ycp:373 msgid "" "<p>\n" "<b><big>Special Device URIs</big></b><br>\n" "<b>Specify an Arbitrary Device URI</b>\n" "if you know the exact right device URI for your particular case\n" "or to modify an existing device URI in a special way.<br>\n" "<b>Send Print Data to Other Program (pipe)</b><br>\n" "To do this, the RPM package cups-backends must be installed.\n" "The package provides the CUPS backend 'pipe' which runs\n" "the program that you specified here.\n" "The matching device URI is:<br>\n" "pipe:/path/to/targetcommand<br>\n" "<b>Daisy-chain Backend Error Handler (beh)</b><br>\n" "To do this, the RPM package cups-backends must be installed.\n" "The package provides the CUPS backend 'beh'.<br>\n" "The backend 'beh' is a wrapper for the usual backend,\n" "which is then called by beh.\n" "This way beh can, depending on its configuration,\n" "repeat the call of the backend or simply hide the error status\n" "of the backend from being seen by the CUPS daemon.\n" "The matching device URI is:<br>\n" "beh:/nodisable/attempts/delay/originalDeviceURI<br>\n" "If nodisable is '1' beh always exits successfully\n" "so that the queue gets never disabled but on the other hand\n" "print jobs are lost if there is an error.<br>\n" "Attempts is the number of attempts to recall the backend\n" "in case of an error. '0' means infinite retries.<br>\n" "Delay is the number of seconds between two attempts\n" "to call the beckend.<br>\n" "The last parameter is the original URI, which the queue had before.<br>\n" "Example:<br>\n" "beh:/1/3/5/socket://ip-address:port-number<br>\n" "The beh backend tries to access a network printer 3 times with 5 second delay\n" "between the attempts. If access still fails, the queue is not disabled\n" "and the print job is lost.<br>\n" "For <b>more information</b> have a look at <tt>/usr/lib[64]/cups/backend/beh</tt> and<br>\n" "http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler<br>\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Specielle enheds-URIer</big></b><br>\n" +"<b>Angiv en vilkårlig enheds-URI</b>,\n" +"hvis du kender det helt rigtige enheds-URI for dit tilfælde, eller\n" +"du vil ændre et eksisterende enheds-URI på en bestemt måde.<br>\n" +"<b>Send udskriftdata til andet program (pipe)</b><br>\n" +"For at gøre dette skal RPM-pakken cups-backends installeres.\n" +"Pakken leverer en CUPS-backend - 'pipe' - der kører det\n" +"program, du har angivet her.\n" +"Den passende enheds-URI er:<br>\n" +"pipe:/sti/til/målkommando<br>\n" +"<b>Fejlhåndtering for Daisy-chain-backend (beh)</b><br>\n" +"For at gøre dette skal RPM-pakken cups-backends installeres.\n" +"Pakken leverer en CUPS-backend 'beh'.<br>\n" +"Denne backend - 'beh' - er et omslag for den alm. backend,\n" +"der så kaldes af beh.\n" +"På denne måde kan beh, afhængigt af dens konfiguration,\n" +"gentage kaldet af backend, eller ganske enkelt forhindre, at\n" +"backendens fejlstatus kan ses af CUPS-dæmonen.\n" +"Den passende enheds-URI er:<br>\n" +"beh:/deaktivér_ikke/forsøg/forsinkelse/original_enheds-URI<br>\n" +"Hvis 'deaktivér_ikke' er '1', vil beh altid afslutte, så køen\n" +"aldrig deaktiveres, men på den anden side mistes\n" +"udskriftsopgaver, hvis der er en fejl.<br>\n" +"'Forsøg' er antal forsøg på at genkalde backenden i\n" +"tilfælde af fejl. '0' betyder uendelige genforsøg.<br>\n" +"'Forsinkelse' er antal sekunder mellem to forsøg\n" +"på at kalde backenden.<br>\n" +"Den sidste parameter er den originale URI, som køen havde før.<br>\n" +"Eksempel:<br>\n" +"beh:/1/3/5/sokkel://ip-adresse:portnummer<br>\n" +"Backenden beh prøver at tilgå netværksprinteren printer 3 gange\n" +"med 5 sek. forsinkelse mellem forsøgene. Hvis tilgang stadig fejler,\n" +"deaktiveres køen ikke, og udskriftsopgaverne mistes.<br>\n" +"For <b>mere information</b> kig på <tt>/usr/lib[64]/cups/backend/beh</tt> og<br>\n" +"http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler<br>\n" +"</p>" #. PrintingViaNetworkDialog help 1/3: #: src/helps.ycp:413 msgid "" "<p>\n" "<b><big>Printing Via Network</big></b><br>\n" "Usually CUPS (Common Unix Printing System) is used to print via network.<br>\n" "By default CUPS uses its so called 'Browsing' mode\n" "to make printers available via network.<br>\n" "In this case remote CUPS servers must publish their printers via network\n" "and accordingly on your host the CUPS daemon process (cupsd) must run\n" "which is listening for incomming information about published printers.<br>\n" "CUPS Browsing information is recieved via UDP port 631.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Udskrift via netværk</big></b><br>\n" +"Normalt benyttes CUPS (Common Unix Printing System) til udskrift via netværk.<br>\n" +"Som standard bruger CUPS dens såkaldte 'browsing'-tilstand\n" +"til at gøre printere tilgængelige via netværk.<br>\n" +"I så fald skal CUPS-servere publicere deres printere via netværk, og\n" +"følgelig på din værtsmaskine skal CUPS-dæmonprocessen (cupsd) køre.\n" +"Denne lytter efter information om publicerede printere.<br>\n" +"CUPS' browsing-information modtages via UDP-port 631.\n" +"</p>" #. PrintingViaNetworkDialog help 2/3: #: src/helps.ycp:424 msgid "" "<p>\n" "If you print only via network and if you use only one single CUPS server,\n" "there is no need to use CUPS Browsing and have a CUPS daemon running on your host.\n" "Instead it is simpler to specify the CUPS server and access it directly.\n" "</p>" msgstr "" +"<p>\n" +"Hvis du kun udskriver via netværk, og hvis du kun bruger en enkelt CUPS-server,\n" +"behøver du ikke benytte CUPS-browsing og have en CUPS-dæmon kørende på din vært.\n" +"I stedet er det enklere at angive CUPS-serveren og tilgå den direkte.\n" +"</p>" #. PrintingViaNetworkDialog help 3/3: #: src/helps.ycp:430 msgid "" "<p>\n" "If there is no CUPS server in your network or if you must additionally use\n" "another kind of print server (e.g. print via a Windows/SMB server\n" "or print via a traditional Unix LPR server) or if you must access\n" "a network printer directly, you have to set up an appropriate print queue\n" "on your host.\n" "</p>" msgstr "" +"<p>\n" +"Hvis der ikke findes nogen CUPS-server på dit netværk, hvis du\n" +"yderligere skal bruge en anden slags udskriftserver (f.eks. udskrift\n" +"via en Windows/SMB server eller en traditionel Unix LPR-server),\n" +"eller hvis du skal tilgå en netværksprinter direkte, skal du sætte\n" +"en passende udskriftskø op på din vært.\n" +"</p>" #. SharingDialog help 1/2: #: src/helps.ycp:440 msgid "" "<p>\n" "<b><big>Sharing Print Queues and Publish Them Via Network</big></b><br>\n" "Usually CUPS (Common Unix Printing System) should be set up to use\n" "its so called 'Browsing' mode to make printers available via network.<br>\n" "In this case CUPS servers publish their local print queues via network\n" "and accordingly on CUPS client systems the CUPS daemon process (cupsd) must run\n" "which is listening for incomming information about published printers.<br>\n" "CUPS Browsing information is recieved via UDP port 631.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Dele udskriftskøer og publicere dem via netværk</big></b><br>\n" +"CUPS (Common Unix Printing System) skulle normalt være sat op til at bruge\n" +"dens såkaldte 'browsing'-tilstand, for at gøre dem tilgængelige via netværk.<br>\n" +"I så fald skal CUPS-servere publicere deres printere via netværk, og\n" +"følgelig på din værtsmaskine skal CUPS-dæmonprocessen (cupsd) køre.\n" +"Denne lytter efter information om publicerede printere.<br>\n" +"CUPS' browsing-information modtages via UDP-port 631.\n" +"</p>" #. SharingDialog help 2/2: #: src/helps.ycp:450 msgid "" "<p>\n" "First of all CUPS client systems must be allowed to access the CUPS server.\n" "Then specify whether or not printers should be published to the clients.\n" "It is not required to publish printers in any case.\n" "If you have only one single CUPS server, there is no need to use CUPS Browsing.\n" "Instead it is simpler to specify the CUPS server on the client systems\n" "(via 'Printing Via Network') so that the clients access the server directly.\n" "</p>" msgstr "" +"<p>\n" +"Alle CUPS klientsystemer skal først og fremmest have lov til at tilgå CUPS-serveren.\n" +"Angiv derefter, hvorvidt printere skal publiceres til klienterne eller ej.\n" +"Det kræves ikke, at printere skal publiceres i nogen tilfælde.\n" +"der er ingen grund til at bruge CUPS-browsing, hvis du blot har en enkelt CUPS-server.\n" +"I stedet er det enklere at angive CUPS-serveren på klientsystemerne\n" +"(via 'Udskrift via netværk'), så klienterne kan tilgå serveren direkte.\n" +"</p>" #. Operation Policy help 1/1: #: src/helps.ycp:461 msgid "" "<p>\n" "<b><big>CUPS Operation Policy</big></b><br>\n" "Operation policies are the rules used for each operation in CUPS.\n" "Such operations are for example 'print something', 'cancel a printout',\n" "'configure a printer', 'modify or remove a printer configuration',\n" "and 'enable or disable printing'.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>CUPS' handlingspolitik</big></b><br>\n" +"Handlingspolitik er reglerne, der anvendes til hver handling i CUPS.\n" +"Sådanne handlinger kan f.eks. være 'skriv noget ud', 'annullér en udskrift',\n" +"'konfigurér en printer', 'ændr eller fjern en printerkonfiguration' og\n" +"'aktivér eller deaktivér udskrift'.\n" +"</p>" #. Autoconfig help 1/1: #: src/helps.ycp:471 msgid "" "<p>\n" "<b><big>CUPS Autoconfiguration for USB Printers</big></b><br>\n" "When a USB printer is connected to the system\n" "cups-autoconfig determines if the printer is already configured. \n" "If it is already configured, printing is enabled.\n" "If the printer is not configured, cups-autoconfig attempts\n" "to select an appropriate driver for it and, if successful,\n" "cups-autoconfig configures it.\n" "When a USB printer is removed, cups-autoconfig can disable printing.\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Automatisk konfiguration af CUPS for USB-printere</big></b><br>\n" +"Når en USB-printer tilsluttes systemet afgør cups-autoconfig\n" +"om printeren allerede er konfigureret.\n" +"Hvis dette er tilfældet, er udskrift aktiveret.\n" +"Hvis printeren derimod ikke er konfigureret vil cups-autoconfig\n" +"forsøge at vælge en passende driver for den, og, hvis det lykkes,\n" +"konfigurere denne.\n" +"Når en USB-printer fjernes, kan cups-autoconfig deaktivere udskrift.\n" +"</p>" #. Useless help 1/1: #: src/helps.ycp:484 msgid "" "<p>\n" "<b><big>Intentionally no help</big></b><br>\n" "This is an experimental YaST module.<br>\n" "The dialog should be self-explanatory.<br>\n" "Usability experts state that a UI is very likely\n" "bad designed when explanation texts are needed.<br>\n" "For a real test whether the dialog is self-explanatory or not,\n" "there must be no help text at all.<br>\n" "Unfortunately it is not possible to remove the\n" "help sub-window from 'Wizard' dialogs\n" "(this dialog is a so called 'Wizard' dialog).\n" "</p>" msgstr "" +"<p>\n" +"<b><big>Bevidst ingen hjælp</big></b><br>\n" +"Dette er et eksperimentelt YaST-modul.<br>\n" +"Dialogen skulle være selvforklarende.<br>\n" +"Brugelighedseksperter udtaler, at hvis forklarende tekster\n" +"er nødvendige, er den grafiske brugerflade dårligt designet.<br>\n" +"For virkelig at teste, om dialogen er selvforklarende eller ej,\n" +"må der slet ikke være nogen hjælpetekst.<br>\n" +"Desværre er det ikke muligt at fjerne sub-vinduet 'Hjælp' fra\n" +"'guide'-dialogerne (denne dialog er en såkaldt guide-dialog).\n" +"</p>" # #. Label for CheckBoxes to select local and/or remote print queues to be listed: #: src/overview.ycp:50 -#, fuzzy msgid "Show" -msgstr "Vis alle" +msgstr "Vis" #. CheckBox to select local print queues to be listed: #: src/overview.ycp:57 -#, fuzzy msgid "&Local" -msgstr "Lokal" +msgstr "&Lokal" #. CheckBox to select remote print queues to be listed: #: src/overview.ycp:64 -#, fuzzy msgid "&Remote" -msgstr "Ekstern" +msgstr "Ekste&rn" #. Header of a Table column with a list of print queues. #. Print queue name: #: src/overview.ycp:89 msgid "Name" -msgstr "" +msgstr "Navn" # #. Header of a Table column with a list of print queues. #. Whether or not is is the default queue: #: src/overview.ycp:98 -#, fuzzy msgid "Default" -msgstr "Standardkø" +msgstr "Standard" # push button label #. PushButton label to modify an already configured print queue: #: src/overview.ycp:111 -#, fuzzy msgid "&Configure" -msgstr "Konfigurér" +msgstr "&Konfigurér" #. PushButton label to refresh the list of print queues: #: src/overview.ycp:118 msgid "Re&fresh List" -msgstr "" +msgstr "Genop&frisk liste" # #. PushButton label to print a test page: #: src/overview.ycp:122 -#, fuzzy msgid "Print &Test Page" -msgstr "Udskriv testside" +msgstr "Udskriv &testside" # #. Show the CUPS server name if it is a client-only config #. where %1 will be replaced by the CUPS server name. #: src/overview.ycp:143 -#, fuzzy, ycp-format +#, ycp-format msgid "CUPS Server %1" -msgstr "CUPS serverindstillinger" +msgstr "CUPS-server %1" # #. Body of a Popup::AnyMessage when no queue was selected from the list: #: src/overview.ycp:241 src/overview.ycp:288 src/overview.ycp:382 -#, fuzzy msgid "Select an entry." -msgstr "Vælg en enhed." +msgstr "Vælg en indgang." #. Header of a Popup::AnyMessage when a remote queue was selected to be deleted: #: src/overview.ycp:247 msgid "Cannot Delete" -msgstr "" +msgstr "Kan ikke slette" #. Body of a Popup::AnyMessage when a remote queue was selected to be deleted: #: src/overview.ycp:249 msgid "This is a remote configuration. Only local configurations can be deleted." -msgstr "" +msgstr "Denne er en ekstern konfiguration. Kun lokale konfigurationer kan slettes." #. Header of a confirmation popup before a queue will be deleted: #: src/overview.ycp:254 -#, fuzzy msgid "Confirm Deletion" -msgstr "Konfiguration" +msgstr "Bekræft sletning" #. Body of a confirmation popup before a queue will be deleted: #: src/overview.ycp:256 msgid "The selected configuration would be deleted immediately and cannot be restored." -msgstr "" +msgstr "Den valgte konfiguration vil blive slettet omgående og kan ikke genoprettes." # #. 'Yes' button label of a confirmation popup before a queue will be deleted: #: src/overview.ycp:258 -#, fuzzy, ycp-format +#, ycp-format msgid "Delete configuration %1" -msgstr "Standardkonfiguration" +msgstr "Slet konfiguration %1" #. 'No' button label of a confirmation popup before a queue will be deleted: #: src/overview.ycp:260 msgid "Do not delete it" -msgstr "" +msgstr "Slet den ikke" # #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because before the function Printer::DeleteQueue #. was called and this function would have shown more specific messages. #: src/overview.ycp:272 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to delete configuration %1." -msgstr "Sæt standardkø" +msgstr "Sletning af konfiguration %1 fejlede." # #. Header of a Popup::AnyMessage when the queue rejects print jobs: #: src/overview.ycp:294 -#, fuzzy msgid "Rejecting Print Jobs" -msgstr "Afvis udskriftsopgaver" +msgstr "Afviser udskriftsopgaver" #. Body of a Popup::AnyMessage when the queue rejects print jobs: #: src/overview.ycp:296 msgid "The testpage cannot be printed because print jobs are rejected." -msgstr "" +msgstr "Denne testside kan ikke udskrives, da udskriftsopgaver afvises." #. Header of a Popup::AnyMessage when printing is disabled for the queue: #: src/overview.ycp:302 -#, fuzzy msgid "Printout Disabled" -msgstr "Udskrift &færdig" +msgstr "Udskrift deaktiveret" #. Body of a Popup::AnyMessage when printing is disabled for the queue: #: src/overview.ycp:304 msgid "The testpage cannot be printed because printout is disabled." -msgstr "" +msgstr "Denne testside kan ikke udskrives, da udskrift er deaktiveret." #. Message of a Popup::Error #. where %1 will be replaced by the queue name. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #: src/overview.ycp:320 -#, fuzzy, ycp-format +#, ycp-format msgid "Failed to print testpage for %1." -msgstr "Model ikke specificeret for køen %1." +msgstr "Udskrift af testside for %1 fejlede." #. Popup message #. where %1 will be replaced by the queue name. #: src/overview.ycp:326 #, ycp-format msgid "Sent testpage to %1. Is should start to print soon." -msgstr "" +msgstr "Testside til %1 er sendt. Udskrift skulle starte om et øjeblik." # #. PopupYesNoHeadline headline #. where %1 will be replaced by the server name: #. It was initially a client-only config, #. but now the user has activated the "Get browsing info" radio button. #. "Get browsing info" means "no longer client-only" regardless #. if the browse_allow_value string is effectively empty or it contains "none" #. so that the client-only config is to be disabled in any case: #. PopupYesNoHeadline headline #. where %1 will be replaced by the server name: #: src/overview.ycp:341 src/printingvianetwork.ycp:435 src/sharing.ycp:506 -#, fuzzy, ycp-format +#, ycp-format msgid "Disable remote CUPS server '%1'" -msgstr "Specificér CUPS-serveren på en anden maskine" +msgstr "Deaktivér ekstern CUPS-server '%1'" #. PopupYesNoHeadline body: #: src/overview.ycp:343 msgid "A remote CUPS server setting conflicts with adding a configuration." -msgstr "" +msgstr "En ekstern CUPS serverindstilling konflikter med tilføjelse af konfiguration." #. Popup::ErrorDetails message. #. Only a simple message because this error does not happen on a normal system #. (i.e. a system which is not totally broken or totally messed up). #. Popup::ErrorDetails message: #: src/overview.ycp:353 src/printingvianetwork.ycp:396 #: src/printingvianetwork.ycp:445 src/printingvianetwork.ycp:553 #: src/sharing.ycp:522 msgid "Failed to remove the 'ServerName' entry in /etc/cups/client.conf" -msgstr "" +msgstr "Fjernelse af indgangen 'ServerName' i /etc/cups/client.conf fejlede" #. Header of a Popup::AnyMessage when a remote queue was selected to be modified: #: src/overview.ycp:388 msgid "Cannot Modify" -msgstr "" +msgstr "Kan ikke ændre" #. Body of a Popup::AnyMessage when a remote queue was selected to be modified: #: src/overview.ycp:390 msgid "This is a remote configuration. Only local configurations can be modified." -msgstr "" +msgstr "Dette er en ekstern konfiguration. Kun lokale konfigurationer kan ændres." # #. Command line help text for the Xprinter module #: src/printer.ycp:54 -#, fuzzy msgid "Configuration of printer" -msgstr "Konfigurationsoversigt for printere" +msgstr "Konfiguration af printer" #. Rich text title for Printer in proposals #: src/printer_proposal.ycp:85 msgid "Printer" -msgstr "Printere" +msgstr "Printer" #: src/printingvianetwork.ycp:46 msgid "Use CUPS to Print Via Network" -msgstr "" +msgstr "Brug CUPS til udskrift via netværk" #: src/printingvianetwork.ycp:54 msgid "&Do not Receive Printer Information from Remote CUPS servers" -msgstr "" +msgstr "Mo&dtag ikke printerinformation fra eksterne CUPS-servere" # #: src/printingvianetwork.ycp:61 -#, fuzzy msgid "Receive Printer &Information from Remote CUPS servers" -msgstr "Specificér CUPS-serveren på en anden maskine" +msgstr "Modtag printer&information fra eksterne CUPS-servere" #: src/printingvianetwork.ycp:70 msgid "Accept Information from the Following Servers" -msgstr "" +msgstr "Acceptér information fra de følgende servere" #: src/printingvianetwork.ycp:77 msgid "Usual &General Setting" -msgstr "" +msgstr "Normal &generel indstilling" #: src/printingvianetwork.ycp:87 msgid "Optional Specific IP Addresses or &Network/Netmask" -msgstr "" +msgstr "Valgfrie specifikke IP-adresser eller &netværk/netmaske" #: src/printingvianetwork.ycp:93 msgid "(each nnn.nnn.nnn.nnn or nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm separated by one space)" -msgstr "" +msgstr "(hvert nnn.nnn.nnn.nnn eller nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm adskilt med ét mellemrum)" #: src/printingvianetwork.ycp:103 msgid "Do All Your Printing Directly via &One Remote CUPS Server" -msgstr "" +msgstr "F&oretag alle dine udskrifter direkte via én ekstern CUPS-server" #: src/printingvianetwork.ycp:112 -#, fuzzy msgid "&Hostname / IP Address" -msgstr "&IP-adresse" +msgstr "&Værtsnavn / IP-adresse" #: src/printingvianetwork.ycp:119 msgid "&Test Server" -msgstr "" +msgstr "&Test server" #: src/printingvianetwork.ycp:129 msgid "Use Another Print Server or Use a Network Printer Directly" -msgstr "" +msgstr "Brug en anden udskriftserver, eller brug en netværksprinter direkte" #: src/printingvianetwork.ycp:133 -#, fuzzy msgid "&Connection Wizard" -msgstr "Tilslutningsguide" +msgstr "Tilslutnings&guide" #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:149 #, ycp-format msgid "The server '%1' is accessible via port 631 (IPP/CUPS)." -msgstr "" +msgstr "Serveren '%1' er tilgængelig via port 631 (IPP/CUPS)." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:154 #, ycp-format msgid "The server '%1' is not accessible via port 631 (IPP/CUPS)." -msgstr "" +msgstr "Serveren '%1' er ikke tilgængelig via port 631 (IPP/CUPS)." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:159 #, ycp-format msgid "The server '%1' responds to a 'ping' in the network." -msgstr "" +msgstr "Serveren '%1' svarer på et 'ping' på netværket." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:164 #, ycp-format msgid "The server '%1' does not respond to a 'ping' in the network." -msgstr "" +msgstr "Serveren '%1' svarer ikke på et 'ping' på netværket." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:169 #, ycp-format msgid "The server name '%1' is known in the network." -msgstr "" +msgstr "Servernavnet '%1' er kendt på netværket." #. Popup message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:174 #, ycp-format msgid "The server name '%1' is not known in the network." -msgstr "" +msgstr "Servernavnet '%1' er ikke kendt på netværket." #. netcat is required for a meaningful test. #. Show negative feedback: #. Popup::ErrorDetails message: #: src/printingvianetwork.ycp:190 msgid "Cannot execute the program 'netcat'" -msgstr "" +msgstr "Kan ikke eksekvere programmet 'netcat'" #. Popup::ErrorDetails details: #: src/printingvianetwork.ycp:192 msgid "The RPM package 'netcat' is required for a meaningful test." -msgstr "" +msgstr "RPM-pakken 'netcat' kræves, for at testen giver mening." #. ping is required for the less meaningful test. #. Show negative feedback: #. Popup::ErrorDetails message #: src/printingvianetwork.ycp:226 msgid "Cannot execute the program 'ping'" -msgstr "" +msgstr "Kan ikke eksekvere programmet 'ping'" #. Popup::ErrorDetails details: #: src/printingvianetwork.ycp:228 msgid "The RPM package 'iputils' is required for a meaningful test." -msgstr "" +msgstr "RPM-pakken 'iputils' kræves, for at testen giver mening." #. The netcat-test failed but the ping-test was successful. #. Show negative feedback: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:241 -#, fuzzy, ycp-format +#, ycp-format msgid "The server '%1' is not accessible" -msgstr "Printserveren er tilgængelig." +msgstr "Serveren '%1' er ikke tilgængelig." #. host is required for the last test. #. Show negative feedback: #. Popup::ErrorDetails message #: src/printingvianetwork.ycp:263 msgid "Cannot execute the program 'host'" -msgstr "" +msgstr "Kan ikke eksekvere programmet 'host'" #. Popup::ErrorDetails details: #: src/printingvianetwork.ycp:265 msgid "The RPM package 'bind-utils' is required for a meaningful test." -msgstr "" +msgstr "RPM-pakken 'bind-utils' kræves, for at testen giver mening." #. The netcat-test and the ping-test failed but the host-test was successful. #. Show negative feedback: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:278 #, ycp-format msgid "The server '%1' does not respond in the network" -msgstr "" +msgstr "Serveren '%1' svarer ikke på netværket" #. The netcat-test and the ping-test and the host-test failed: #. Show negative feedback: #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:294 #, ycp-format msgid "The server '%1' is unknown" -msgstr "" +msgstr "Serveren '%1' er ukendt" #. Popup::ErrorDetails message: #: src/printingvianetwork.ycp:331 msgid "Failed to set 'BrowseAllow none' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'BrowseAllow none' i /etc/cups/cupsd.conf" #. A "Get browsing info" config with a local cupsd was switched #. to a "No browsing info" config with a local running cupsd. #. The Printerlib::GetAndSetCupsdStatus("restart") function #. already waits 40 seconds but the default BrowseTimeout value #. for the local cupsd is 5 minutes. #. Therefore it takes by default 5 minutes until printer information #. that was previously received by Browsing is removed (via timeout) #. from the local cupsd's list. #. I assume most users do not like to wait 5 minutes which is no problem #. because they can just click the [OK] button to continue but then #. they are at least informend why there may be still remote queues: #. Popup message: #: src/printingvianetwork.ycp:353 msgid "" "When switching from 'receive information' to 'do not receive information'\n" "it takes usually 5 minutes until already received information faded away..." msgstr "" +"Under skift fra 'modtag information' til 'modtag ikke information' tager\n" +"det normalt 5 minutter, før allerede modtaget information fortoner sig..." #. Popup::ErrorDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:384 src/printingvianetwork.ycp:640 #, ycp-format msgid "Failed to set 'ServerName %1' in /etc/cups/client.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'ServerName %1' i /etc/cups/client.conf" #. PopupYesNoHeadline body: #: src/printingvianetwork.ycp:437 msgid "A remote CUPS server setting conflicts with receiving printer information." -msgstr "" +msgstr "En ekstern CUPS serverindstilling konflikter med modtagelse af printerinformation." #. Popup::ErrorDetails message: #: src/printingvianetwork.ycp:498 src/sharing.ycp:464 msgid "Failed to set 'Browsing On' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'Browsing On' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by the values for BrowseAllow. #: src/printingvianetwork.ycp:512 #, ycp-format msgid "Failed to set BrowseAllow value(s) '%1' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte BrowseAllow-værdierne '%1' i /etc/cups/cupsd.conf" #. Header of a Popup::ContinueCancelHeadline #. when a client-only server is not accessible #. where %1 will be replaced by the server name: #: src/printingvianetwork.ycp:575 -#, fuzzy, ycp-format +#, ycp-format msgid "Continue regardless that '%1' is not accessible?" -msgstr "Printserveren er tilgængelig." +msgstr "Vil du fortsætte, selvom '%1' ikke er tilgængelig?" #. Body of a Popup::ContinueCancelHeadline #. when a client-only server is not accessible: #: src/printingvianetwork.ycp:580 msgid "A non-accessible server leads to an endless sequence of further failures." -msgstr "" +msgstr "En ikke-tilgængelig server fører til en uendelig sekvens af yderligere fejl." #. The user has decided to continue regardless that the client-only server is not accessible. #. In this case the cups_client_only tool fails in any case because it also tests accessibility. #. But cups_client_only might have failed for whatever other reason. #. Therefore a Popup::MessageDetails is shown to inform about the actual result: #. Popup::MessageDetails message #. where %1 will be replaced by the server name. #: src/printingvianetwork.ycp:632 #, ycp-format msgid "Tried to set 'ServerName %1' in /etc/cups/client.conf" -msgstr "" +msgstr "Prøvede at sætte 'ServerName %1' i /etc/cups/client.conf" #. Popup::Error message: #: src/printingvianetwork.ycp:803 src/sharing.ycp:949 msgid "Failed to apply the settings to the system." -msgstr "" +msgstr "Anvendelse af indstillingen i systemet fejlede." # #. A RadioButton label to deny remote access to local print queues: #: src/sharing.ycp:63 -#, fuzzy msgid "&Deny remote access" -msgstr "Fjernadgang" +msgstr "Nægt ekstern a&dgang" # #. A RadioButton label to allow remote access to local print queues: #: src/sharing.ycp:73 -#, fuzzy msgid "&Allow remote access" -msgstr "Fjernadgang" +msgstr "Till&ad ekstern adgang" #. A CheckBox label to allow remote access to local print queues #. for computers within the local network: #: src/sharing.ycp:89 msgid "For computers within the &local network" -msgstr "" +msgstr "Til computere indenfor det &lokale netværk" #. A CheckBox label to publish local print queues by default within the local network: #: src/sharing.ycp:100 msgid "&Publish printers by default within the local network" -msgstr "" +msgstr "&Publicér printere som standard indenfor det lokale netværk" #. A caption for a table to allow remote access to local print queues #. via network interfaces specified in the table below: #: src/sharing.ycp:111 msgid "Via network interfaces specified below" -msgstr "" +msgstr "Via netværksgrænsefladerne angivet herunder" # #. A table column header where the column lists network interfaces: #: src/sharing.ycp:118 -#, fuzzy msgid "Interface" -msgstr "Intern zone" +msgstr "Grænseflade" #. A table column header where the column shows whether or not #. local print queues are published by default #. via the network interface in the other table column: #: src/sharing.ycp:122 msgid "Publish printers by default via this interface" -msgstr "" +msgstr "Publicér printere som standard via denne grænseflade" #. A PushButton label to add a network interface to the table which shows #. the network interfaces to allow remote access to local print queues: #: src/sharing.ycp:132 msgid "&Add" -msgstr "" +msgstr "&Tilføj" #. A PushButton label to change a network interface in the table which shows #. the network interfaces to allow remote access to local print queues: #: src/sharing.ycp:138 msgid "&Edit" -msgstr "" +msgstr "&Redigér" #. A PushButton label to delete a network interface from the table which shows #. the network interfaces to allow remote access to local print queues: #: src/sharing.ycp:144 msgid "&Delete" -msgstr "" +msgstr "&Slet" #. A caption for a table to allow remote access to local print queues #. for hosts and/or networks specified in the table below: #: src/sharing.ycp:161 msgid "For hosts / networks specified below" -msgstr "" +msgstr "Til værtsmaskiner / netværk angivet herunder" #. A table column header where the column shows whether or not #. local print queues are published by default #. via the IP address in the other table column: #: src/sharing.ycp:172 msgid "Publish printers by default for this address" -msgstr "" +msgstr "Publicér printere som standard for denne adresse" #. A PushButton label to add an IP address to the table which shows #. the IP addresses to allow remote access to local print queues: #: src/sharing.ycp:182 msgid "A&dd" -msgstr "" +msgstr "T&ilføj" #. A PushButton label to change an IP address in the table which shows #. the IP addresses to allow remote access to local print queues: #: src/sharing.ycp:188 msgid "Ed&it" -msgstr "" +msgstr "R&ediger" #. A PushButton label to delete an IP address from the table which shows #. the IP addresses to allow remote access to local print queues: #: src/sharing.ycp:194 msgid "De&lete" -msgstr "" +msgstr "S&let" #. A CheckBox label to publish local print queues by default #. via a partivular network interface which is shown below. #: src/sharing.ycp:215 msgid "&Publish printers by default via the network interface below." -msgstr "" +msgstr "&Publicér printere som standard via netværksgrænsefladen herunder." #. A header for a ComboBox which lists network interfaces: #: src/sharing.ycp:222 msgid "Available Network &Interfaces:" -msgstr "" +msgstr "Tilgængelige netværks&grænseflader:" #: src/sharing.ycp:256 msgid "&Publish printers by default via " -msgstr "" +msgstr "&Publicér printere som standard via " #. translators: input field label for list of configured IPs #: src/sharing.ycp:258 -#, fuzzy msgid "Network &Address:" -msgstr "Netværksprintere" +msgstr "Netværks&adresse:" #. Popup::ErrorDetails message. #. Do not change or translate "Listen localhost", it is a system settings name. #: src/sharing.ycp:353 msgid "Failed to set only 'Listen localhost' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes kun at sætte 'Listen localhost' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message. #. Do not change or translate "Allow", it is a system settings name. #: src/sharing.ycp:361 msgid "Failed to remove 'Allow' entries from /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at fjerne 'Allow'-indgange fra /etc/cups/cupsd.conf" #. Popup::ErrorDetails message. #. Do not change or translate "BrowseAddress", it is a system settings name. #: src/sharing.ycp:374 msgid "Failed to remove 'BrowseAddress' entries from /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at fjerne 'BrowseAddress'-indgange fra /etc/cups/cupsd.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by one or more system settings values. #. Do not change or translate "Allow", it is a system settings name. #: src/sharing.ycp:436 #, ycp-format msgid "Failed to set 'Allow' entries '%1' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'Allow'-indgangene '%1' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message #. where %1 will be replaced by one or more system settings values. #. Do not change or translate "BrowseAddress", it is a system settings name. #: src/sharing.ycp:453 #, ycp-format msgid "Failed to set 'BrowseAddress' entries '%1' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'BrowseAddress'-indgangene '%1' i /etc/cups/cupsd.conf" #. Popup::ErrorDetails message. #. Do not change or translate "Listen *:631", it is a system settings name. #: src/sharing.ycp:479 msgid "Failed to set 'Listen *:631' in /etc/cups/cupsd.conf" -msgstr "" +msgstr "Mislykkedes at sætte 'Listen *:631' i /etc/cups/cupsd.conf" #. PopupYesNoHeadline body: #: src/sharing.ycp:510 msgid "A remote CUPS server setting conflicts with sharing local printer configurations." -msgstr "" +msgstr "En ekstern CUPS serverindstilling konflikter med deling af lokale printerkonfigurationer." # #. Initialization dialog caption #: src/wizards.ycp:124 -#, fuzzy msgid "Printer Configuration" -msgstr "Gemmer printerkonfiguration" +msgstr "Konfiguration af printer" #. Initialization dialog contents #: src/wizards.ycp:126 msgid "Initializing..." -msgstr "" - -#, fuzzy =============================================================================== Diff created and cleaned up --------------------------- Total number of messages minus fake ones equals total number of real messages. 278 - 0 = 278 Messages that did not need clean up: Changed: 165 : Fyzzy : 113 Messages that was cleaned up : Changed: 0 : Fyzzy : 0 : --------------------------------- Total : 278 ===============================================================================