commit perl-Log-Dispatch-FileRotate for openSUSE:Factory

Hello community, here is the log from the commit of package perl-Log-Dispatch-FileRotate for openSUSE:Factory checked in at 2017-01-22 00:21:14 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/perl-Log-Dispatch-FileRotate (Old) and /work/SRC/openSUSE:Factory/.perl-Log-Dispatch-FileRotate.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "perl-Log-Dispatch-FileRotate" Changes: -------- --- /work/SRC/openSUSE:Factory/perl-Log-Dispatch-FileRotate/perl-Log-Dispatch-FileRotate.changes 2011-11-21 12:42:26.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.perl-Log-Dispatch-FileRotate.new/perl-Log-Dispatch-FileRotate.changes 2017-01-22 00:21:17.153843092 +0100 @@ -1,0 +2,17 @@ +Fri Oct 7 05:57:27 UTC 2016 - coolo@suse.com + +- updated to 1.22 + see /usr/share/doc/packages/perl-Log-Dispatch-FileRotate/Changes + +------------------------------------------------------------------- +Sun Oct 2 05:37:18 UTC 2016 - coolo@suse.com + +- updated to 1.20 + see /usr/share/doc/packages/perl-Log-Dispatch-FileRotate/Changes + + + 1.20 Sat Oct 01 2016 + - Fix Date::Manip warnings about deprecated TZ config variable. If + Date::Manip 6.x or later is installed we now use SetDate instead. + +------------------------------------------------------------------- Old: ---- Log-Dispatch-FileRotate-1.19.tar.gz New: ---- Log-Dispatch-FileRotate-1.22.tar.gz cpanspec.yml ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ perl-Log-Dispatch-FileRotate.spec ++++++ --- /var/tmp/diff_new_pack.6Lsu7h/_old 2017-01-22 00:21:18.061714591 +0100 +++ /var/tmp/diff_new_pack.6Lsu7h/_new 2017-01-22 00:21:18.061714591 +0100 @@ -1,7 +1,7 @@ # # spec file for package perl-Log-Dispatch-FileRotate # -# Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2016 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -15,68 +15,91 @@ # Please submit bugfixes or comments via http://bugs.opensuse.org/ # -# norootforbuild - Name: perl-Log-Dispatch-FileRotate +Version: 1.22 +Release: 0 %define cpan_name Log-Dispatch-FileRotate -Summary: Log to files that archive/rotate themselves -Version: 1.19 -Release: 12 -License: Artistic-1.0 +Summary: Log to Files that Archive/Rotate Themselves +License: Artistic-1.0 or GPL-1.0+ Group: Development/Libraries/Perl -Url: http://search.cpan.org/dist/Log-Dispatch-FileRotate -Source0: %{cpan_name}-%{version}.tar.gz +Url: http://search.cpan.org/dist/Log-Dispatch-FileRotate/ +Source0: http://www.cpan.org/authors/id/M/MS/MSCHOUT/%{cpan_name}-%{version}.tar.gz +Source1: cpanspec.yml +BuildArch: noarch BuildRoot: %{_tmppath}/%{name}-%{version}-build -%{perl_requires} BuildRequires: perl BuildRequires: perl-macros -BuildRequires: perl(File::Spec) -BuildRequires: perl(Fcntl) -#BuildRequires: perl(Module::Build) -# other not perl || perl-base BuildRequires: perl(Date::Manip) -BuildRequires: perl(Log::Log4perl) >= 1.0 +BuildRequires: perl(Log::Dispatch::File) BuildRequires: perl(Log::Dispatch::Output) BuildRequires: perl(Params::Validate) -Requires: perl(File::Spec) -# other not perl || perl-base +BuildRequires: perl(Path::Tiny) >= 0.018 +BuildRequires: perl(Test::More) >= 0.88 +BuildRequires: perl(version) Requires: perl(Date::Manip) -Requires: perl(Log::Dispatch) -Requires: perl(Log::Log4perl) >= 1.0 +Requires: perl(Log::Dispatch::File) +Requires: perl(Log::Dispatch::Output) Requires: perl(Params::Validate) -Provides: %{cpan_name} +Requires: perl(version) +%{perl_requires} %description This module provides a simple object for logging to files under the Log::Dispatch::* system, and automatically rotating them according to -different constraints. This is basically a Log::Dispatch::File wrapper -with additions. To that end the arguments +different constraints. This is basically a Log::Dispatch::File wrapper with +additions. To that end the arguments name, min_level, filename and mode behave the same as Log::Dispatch::File. So see its man page (perldoc Log::Dispatch::File) -Authors: --------- - Mark Pfeiffer, - inspired by Dave Rolsky's, , code :-) +The arguments size and max specify the maximum size and maximum number of +log files created. The size defaults to 10M and the max number of files +defaults to 1. If DatePattern is not defined then we default to working in +size mode. That is, use size values for deciding when to rotate. + +Once DatePattern is defined FileRotate will move into time mode. Once this +happens file rotation ignores size constraints and uses the defined date +pattern constraints. + +If you setup a config file using Log::Log4perl::init_and_watch() or the +like, you can switch between modes just by commenting out the DatePattern +line. + +When using DatePattern make sure TZ is defined correctly and that the TZ +you use is understood by Date::Manip. We use Date::Manip to generate our +recurrences. Bad TZ equals bad recurrences equals surprises! Read the +Date::Manip man page for more details on TZ. + +DatePattern will default to a daily rotate if your entered pattern is +incorrect. You will also get a warning message. + +If you have multiple writers that were started at different times you will +find each writer will try to rotate the log file at a recurrence calculated +from its start time. To sync all the writers just use a config file and +update it after starting your last writer. This will cause +Log::Dispatch::FileRotate->new() to be called by each of the writers close +to the same time, and if your recurrences aren't too close together all +should sync up just nicely. + +I initially aasumed a long runinng process but it seems people are using +this module as part of short running CGI programs. So, now we look at the +last modified time stamp of the log file and compare it to a previous +occurance of a DatePattern, on startup only. If the file stat shows the +mtime to be earlier than the previous recurrance then I rotate the log +file. - Kevin Goess suggested multiple writers should be supported. - He also conned me into doing the time based stuff. Thanks Kevin! :-) - - Thanks also to Dan Waldheim for helping with some of the locking - issues in a forked environment. - - And thanks to Stephen Gordon for his more portable code on lockfile naming. +We handle multiple writers using flock(). %prep %setup -q -n %{cpan_name}-%{version} +find . -type f ! -name \*.pl -print0 | xargs -0 chmod 644 %build -perl Makefile.PL OPTIMIZE="$RPM_OPT_FLAGS" -%{__make} +%{__perl} Makefile.PL INSTALLDIRS=vendor +%{__make} %{?_smp_mflags} %check %{__make} test @@ -86,11 +109,8 @@ %perl_process_packlist %perl_gen_filelist -%clean -%{__rm} -rf $RPM_BUILD_ROOT - %files -f %{name}.files -%defattr(-,root,root) -%doc Changes README +%defattr(-,root,root,755) +%doc Changes LICENSE README %changelog ++++++ Log-Dispatch-FileRotate-1.19.tar.gz -> Log-Dispatch-FileRotate-1.22.tar.gz ++++++ ++++ 3498 lines of diff (skipped) ++++++ cpanspec.yml ++++++ --- #description_paragraphs: 3 #description: |- # override description from CPAN #summary: override summary from CPAN #no_testing: broken upstream #sources: # - source1 # - source2 #patches: # foo.patch: -p1 # bar.patch: #preamble: |- # BuildRequires: gcc-c++ #post_prep: |- # hunspell=`pkg-config --libs hunspell | sed -e 's,-l,,; s, *,,g'` # sed -i -e "s,hunspell-X,$hunspell," t/00-prereq.t Makefile.PL #post_build: |- # rm unused.files #post_install: |- # sed on %{name}.files #license: SUSE-NonFree #skip_noarch: 1 #custom_build: |- #./Build build flags=%{?_smp_mflags} --myflag #custom_test: |- #startserver && make test #ignore_requires: Bizarre::Module