Hello community,
here is the log from the commit of package libcxgb4-rdmav2 for openSUSE:Factory checked in at 2016-04-28 16:56:51
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/libcxgb4-rdmav2 (Old)
and /work/SRC/openSUSE:Factory/.libcxgb4-rdmav2.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "libcxgb4-rdmav2"
Changes:
--------
--- /work/SRC/openSUSE:Factory/libcxgb4-rdmav2/libcxgb4-rdmav2.changes 2015-02-16 21:14:22.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.libcxgb4-rdmav2.new/libcxgb4-rdmav2.changes 2016-04-28 17:01:47.000000000 +0200
@@ -1,0 +2,23 @@
+Mon Apr 25 07:47:01 UTC 2016 - p.drouand@gmail.com
+
+- Update to version 1.3.6
+ * libcxgb4: skip TERMINATE CQEs before testing for errors
+ * libcxgb4:Eliminate warnings seen with buildall.sh on a 32 bit system.
+ + fixes warnings due to improper typecasting.
+ + suppresses warnings due to unused variables.
+ + typecasted u64 value to long long to avoid warnings on x64bit systems.
+ * libcxgb4: add NULL check for wr->sg_list
+ 0B reads with a NULL sg cause a seg fault. So if there is no sg_list, then
+ set the WQE read length to 0.
+ * libcxgb4: update config.sub and config.guess
+ libcxgb4 had old versions of these files that caused
+ configure to fail on ppc64le platforms.
+ * libcxgb4: remove config/missing
+ This file gets installed via autoconf and shouldnt be in the repo.
+ * Gracefully handle unknown CQE status errors
+ c4iw_poll_cq_on() shouldn't fail the poll operation just because the
+ CQE status is unknown. Rather, it should map this to the "fatal error"
+ status and log the anomaly.
+- Update libcxgb4-rdmav2-ah_message.patch
+
+-------------------------------------------------------------------
Old:
----
libcxgb4-1.3.5.tar.gz
New:
----
libcxgb4-1.3.6.tar.gz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ libcxgb4-rdmav2.spec ++++++
--- /var/tmp/diff_new_pack.6mZkv8/_old 2016-04-28 17:01:50.000000000 +0200
+++ /var/tmp/diff_new_pack.6mZkv8/_new 2016-04-28 17:01:50.000000000 +0200
@@ -1,7 +1,7 @@
#
# spec file for package libcxgb4-rdmav2
#
-# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2016 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: libcxgb4-rdmav2
Summary: Chelsio T4 iWARP RNIC OpenIB Userspace Library
-Version: 1.3.5
+Version: 1.3.6
Release: 0
License: GPL-2.0 or BSD-2-Clause
Group: System/Libraries
++++++ libcxgb4-1.3.5.tar.gz -> libcxgb4-1.3.6.tar.gz ++++++
++++ 3541 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libcxgb4-1.3.5/ChangeLog new/libcxgb4-1.3.6/ChangeLog
--- old/libcxgb4-1.3.5/ChangeLog 2014-07-31 18:28:31.000000000 +0200
+++ new/libcxgb4-1.3.6/ChangeLog 2015-12-07 17:42:33.000000000 +0100
@@ -1,14 +1,93 @@
-commit 6a417d903b9add7c8ab2b71ac11c85c46671e020
+commit 204dcd6e76070f6b8b1d8e4f04d9e752eb3d9809
+Author: root
+Date: Mon Dec 7 08:38:24 2015 -0800
+
+ Spin release 1.3.6.
+
+ Signed-off-by: Steve Wise
+
+commit 2a4fbf58f2ea1fc47adcc7b2b4efd78227c65b97
+Author: Steve Wise
+Date: Mon Dec 7 08:30:55 2015 -0800
+
+ libcxgb4: skip TERMINATE CQEs before testing for errors
+
+ In poll_cq() if the wq happens to have just transitioned into error state,
+ and a TERMINATE CQE is the next CQE in the hwcq, then the TERMINATE
+ is incorrectly returned as a successful RECV CQE. This causes a false
+ RECV completion. The fix is to skip TERMINATE CQEs first.
+
+ Signed-off-by: Steve Wise
+
+commit 793333ea0cc00c977a0134d91b820e51557f4b7c
+Author: Steve Wise
+Date: Mon Dec 7 08:30:55 2015 -0800
+
+ libcxgb4:Eliminate warnings seen with buildall.sh on a 32 bit system.
+
+ ->fixes warnings due to improper typecasting.
+ ->suppresses warnings due to unused variables.
+ ->typecasted u64 value to long long to avoid warnings on x64bit systems.
+
+ Signed-off-by: Bharat Potnuri
+ Signed-off-by: Steve Wise
+
+commit 4b2df073b106e830f2fa2446d1990447bb8c4e10
+Author: Steve Wise
+Date: Mon Dec 7 08:30:55 2015 -0800
+
+ libcxgb4: add NULL check for wr->sg_list
+
+ 0B reads with a NULL sg cause a seg fault. So if there is no sg_list, then
+ set the WQE read length to 0.
+
+ Signed-off-by: Steve Wise
+ Signed-off-by: Bharat Potnuri
+
+commit 0550101d95805a2c53fb6934ed1c02da4e28bde2
+Author: Steve Wise
+Date: Mon Dec 7 08:30:55 2015 -0800
+
+ libcxgb4: update config.sub and config.guess
+
+ libcxgb4 had old versions of these files that caused
+ configure to fail on ppc64le platforms.
+
+ Signed-off-by: Steve Wise
+
+commit 204b6fab0b0aa62a96aedb54704d9babd336c13c
+Author: Steve Wise
+Date: Mon Dec 7 08:30:55 2015 -0800
+
+ libcxgb4: remove config/missing
+
+ This file gets installed via autoconf and shouldnt be in the repo.
+
+ Signed-off-by: Steve Wise
+
+commit 43f2862ccfcf19d8aec78c65482956ae41efc486
+Author: Hariprasad Shenai
+Date: Mon Dec 7 08:30:55 2015 -0800
+
+ Gracefully handle unknown CQE status errors
+
+ c4iw_poll_cq_on() shouldn't fail the poll operation just because the
+ CQE status is unknown. Rather, it should map this to the "fatal error"
+ status and log the anomaly.
+
+ Signed-off-by: Hariprasad Shenai
+
+commit 2517487f45688ed93b93a1ebf6ece4f33c3f778f
Author: Steve Wise
-Date: Thu Jul 31 11:25:22 2014 -0500
+Date: Thu Jul 31 12:10:30 2014 -0500
Spin release 1.3.5.
Signed-off-by: Steve Wise
-commit 52ecbea1b908d3b449022e2d75ebe0ca3885bcf2
+commit 9d996e396d4574a72583e4049d487ab5909cf8ac
Author: Steve Wise
-Date: Thu Jul 31 11:14:05 2014 -0500
+Date: Thu Jul 31 12:10:30 2014 -0500
libcxb4: use wc_wmb() instead of wmb().
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libcxgb4-1.3.5/config/missing new/libcxgb4-1.3.6/config/missing
--- old/libcxgb4-1.3.5/config/missing 2014-06-18 17:14:22.000000000 +0200
+++ new/libcxgb4-1.3.6/config/missing 2015-12-07 19:44:54.000000000 +0100
@@ -1,10 +1,10 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2005-06-08.21
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program. If not, see http://www.gnu.org/licenses/.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -33,6 +31,8 @@
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -44,7 +44,7 @@
msg="missing on your system"
-case "$1" in
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -77,6 +77,7 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -86,6 +87,9 @@
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
Send bug reports to ."
exit $?
;;
@@ -103,15 +107,22 @@
esac
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
-# the program).
-case "$1" in
- lex|yacc)
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
- tar)
+ tar*)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
@@ -135,7 +146,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case "$1" in
+case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -145,7 +156,7 @@
touch aclocal.m4
;;
- autoconf)
+ autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
@@ -154,7 +165,7 @@
touch configure
;;
- autoheader)
+ autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
@@ -164,7 +175,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -184,7 +195,7 @@
while read f; do touch "$f"; done
;;
- autom4te)
+ autom4te*)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
@@ -192,8 +203,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
@@ -207,80 +218,78 @@
fi
;;
- bison|yacc)
+ bison*|yacc*)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
- lex|flex)
+ lex*|flex*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
- help2man)
+ help2man*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit 1
+ exit $?
fi
;;
- makeinfo)
+ makeinfo*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -289,11 +298,17 @@
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
@@ -303,7 +318,7 @@
touch $file
;;
- tar)
+ tar*)
shift
# We have already tried tar in the generic part.
@@ -317,13 +332,13 @@
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
@@ -356,5 +371,6 @@
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libcxgb4-1.3.5/configure.in new/libcxgb4-1.3.6/configure.in
--- old/libcxgb4-1.3.5/configure.in 2014-07-31 18:28:31.000000000 +0200
+++ new/libcxgb4-1.3.6/configure.in 2015-12-07 17:42:33.000000000 +0100
@@ -1,11 +1,11 @@
dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.57)
-AC_INIT(libcxgb4, 1.3.5, linux-rdma@vger.kernel.org)
+AC_INIT(libcxgb4, 1.3.6, linux-rdma@vger.kernel.org)
AC_CONFIG_SRCDIR([src/libcxgb4.h])
AC_CONFIG_AUX_DIR(config)
AC_CONFIG_HEADERS(config.h)
-AM_INIT_AUTOMAKE(libcxgb4, 1.3.5)
+AM_INIT_AUTOMAKE(libcxgb4, 1.3.6)
AM_PROG_LIBTOOL
AC_ARG_ENABLE(libcheck, [ --disable-libcheck do not test for presence of ib libraries],
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libcxgb4-1.3.5/libcxgb4.spec new/libcxgb4-1.3.6/libcxgb4.spec
--- old/libcxgb4-1.3.5/libcxgb4.spec 2014-07-31 18:29:05.000000000 +0200
+++ new/libcxgb4-1.3.6/libcxgb4.spec 2015-12-07 19:45:10.000000000 +0100
@@ -1,7 +1,7 @@
-%define ver 1.3.5
+%define ver 1.3.6
Name: libcxgb4
-Version: 1.3.5
+Version: 1.3.6
Release: 1%{?dist}
Summary: Chelsio T4/T5 RNIC Open Fabrics Userspace Library
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libcxgb4-1.3.5/libcxgb4.spec.in new/libcxgb4-1.3.6/libcxgb4.spec.in
--- old/libcxgb4-1.3.5/libcxgb4.spec.in 2014-07-31 18:28:31.000000000 +0200
+++ new/libcxgb4-1.3.6/libcxgb4.spec.in 2015-12-07 17:42:33.000000000 +0100
@@ -1,7 +1,7 @@
%define ver @VERSION@
Name: libcxgb4
-Version: 1.3.5
+Version: 1.3.6
Release: 1%{?dist}
Summary: Chelsio T4/T5 RNIC Open Fabrics Userspace Library
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libcxgb4-1.3.5/src/cq.c new/libcxgb4-1.3.6/src/cq.c
--- old/libcxgb4-1.3.5/src/cq.c 2014-06-18 17:14:22.000000000 +0200
+++ new/libcxgb4-1.3.6/src/cq.c 2015-12-07 17:42:29.000000000 +0100
@@ -322,11 +322,11 @@
static void dump_cqe(void *arg)
{
u64 *p = arg;
- syslog(LOG_NOTICE, "cxgb4 err cqe %016lx %016lx %016lx %016lx\n",
- be64_to_cpu(p[0]),
- be64_to_cpu(p[1]),
- be64_to_cpu(p[2]),
- be64_to_cpu(p[3]));
+ syslog(LOG_NOTICE, "cxgb4 err cqe %016llx %016llx %016llx %016llx\n",
+ (long long)be64_to_cpu(p[0]),
+ (long long)be64_to_cpu(p[1]),
+ (long long)be64_to_cpu(p[2]),
+ (long long)be64_to_cpu(p[3]));
}
/*
@@ -428,6 +428,11 @@
advance_oldest_read(wq);
}
+ if (CQE_OPCODE(hw_cqe) == FW_RI_TERMINATE) {
+ ret = -EAGAIN;
+ goto skip_cqe;
+ }
+
if (CQE_STATUS(hw_cqe) || t4_wq_in_error(wq)) {
*cqe_flushed = (CQE_STATUS(hw_cqe) == T4_ERR_SWFLUSH);
wq->error = 1;
@@ -439,11 +444,6 @@
goto proc_cqe;
}
- if (CQE_OPCODE(hw_cqe) == FW_RI_TERMINATE) {
- ret = -EAGAIN;
- goto skip_cqe;
- }
-
/*
* RECV completion.
*/
@@ -697,7 +697,7 @@
default:
PDBG("Unexpected cqe_status 0x%x for QPID=0x%0x\n",
CQE_STATUS(&cqe), CQE_QPID(&cqe));
- ret = -EINVAL;
+ wc->status = IBV_WC_FATAL_ERR;
}
}
if (wc->status && wc->status != IBV_WC_WR_FLUSH_ERR)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libcxgb4-1.3.5/src/qp.c new/libcxgb4-1.3.6/src/qp.c
--- old/libcxgb4-1.3.5/src/qp.c 2014-07-31 18:28:31.000000000 +0200
+++ new/libcxgb4-1.3.6/src/qp.c 2015-12-07 17:42:29.000000000 +0100
@@ -275,9 +275,9 @@
len16 = be64_to_cpu(*p) & 0xff;
while (len16--) {
- printf("%02x: %016lx ", (u8)(unsigned long)p, be64_to_cpu(*p));
+ printf("%02x: %016llx ", (u8)(unsigned long)p, (long long)be64_to_cpu(*p));
p++;
- printf("%016lx\n", be64_to_cpu(*p));
+ printf("%016llx\n", (long long)be64_to_cpu(*p));
p++;
}
}
@@ -287,7 +287,7 @@
struct ibv_modify_qp cmd;
struct ibv_qp_attr attr;
int mask;
- int ret;
+ int __attribute__((unused)) ret;
wc_wmb();
if (qid == qhp->wq.sq.qid) {
@@ -362,7 +362,8 @@
err = build_rdma_read(wqe, wr, &len16);
if (err)
break;
- swsqe->read_len = wr->sg_list[0].length;
+ swsqe->read_len = wr->sg_list ? wr->sg_list[0].length :
+ 0;
if (!qhp->wq.sq.oldest_read)
qhp->wq.sq.oldest_read = swsqe;
break;
++++++ libcxgb4-rdmav2-ah_message.patch ++++++
--- /var/tmp/diff_new_pack.6mZkv8/_old 2016-04-28 17:01:50.000000000 +0200
+++ /var/tmp/diff_new_pack.6mZkv8/_new 2016-04-28 17:01:50.000000000 +0200
@@ -7,7 +7,7 @@
--- configure.in.orig 2014-04-03 12:02:58.809101866 +0200
+++ configure.in 2014-04-03 12:04:28.451029934 +0200
@@ -8,7 +8,7 @@
- AM_INIT_AUTOMAKE(libcxgb4, 1.3.5)
+ AM_INIT_AUTOMAKE(libcxgb4, 1.3.6)
AM_PROG_LIBTOOL
-AC_ARG_ENABLE(libcheck, [ --disable-libcheck do not test for presence of ib libraries],