Hello community,
here is the log from the commit of package xf86-video-nouveau for openSUSE:Factory checked in at 2015-12-18 21:52:25
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/xf86-video-nouveau (Old)
and /work/SRC/openSUSE:Factory/.xf86-video-nouveau.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "xf86-video-nouveau"
Changes:
--------
--- /work/SRC/openSUSE:Factory/xf86-video-nouveau/xf86-video-nouveau.changes 2015-11-17 14:20:17.000000000 +0100
+++ /work/SRC/openSUSE:Factory/.xf86-video-nouveau.new/xf86-video-nouveau.changes 2015-12-18 21:52:26.000000000 +0100
@@ -1,0 +2,6 @@
+Tue Dec 15 14:05:49 UTC 2015 - sndirsch@suse.com
+
+- Update to version 1.0.12
+ * New nouveau DDX release
+
+-------------------------------------------------------------------
Old:
----
xf86-video-nouveau-1.0.11-git_1ff13a9_2015-09-13.tar.bz2
New:
----
xf86-video-nouveau-1.0.12.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ xf86-video-nouveau.spec ++++++
--- /var/tmp/diff_new_pack.dIPttb/_old 2015-12-18 21:52:30.000000000 +0100
+++ /var/tmp/diff_new_pack.dIPttb/_new 2015-12-18 21:52:30.000000000 +0100
@@ -26,7 +26,7 @@
BuildRequires: pkgconfig(libudev)
BuildRequires: pkgconfig(xorg-macros)
Url: http://nouveau.freedesktop.org/wiki/
-Version: 1.0.11
+Version: 1.0.12
Release: 0
Summary: Accelerated Open Source driver for nVidia cards
License: MIT
@@ -37,8 +37,7 @@
Obsoletes: xorg-x11-driver-video-nouveau < %{version}
ExclusiveArch: %ix86 x86_64 ppc ppc64 %arm aarch64
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-#Source0: http://xorg.freedesktop.org/archive/individual/driver/%{name}-%{version}.tar.bz2
-Source0: %{name}-%{version}-git_1ff13a9_2015-09-13.tar.bz2
+Source0: http://xorg.freedesktop.org/archive/individual/driver/%{name}-%{version}.tar.bz2
Patch0: N_xf86-video-nouveau_nva3-noaccel-info.patch
Supplements: modalias(xorg-x11-server:pci:v000012D2d*sv*sd*bc03sc*i*)
Supplements: modalias(xorg-x11-server:pci:v000010DEd*sv*sd*bc03sc*i*)
++++++ xf86-video-nouveau-1.0.11-git_1ff13a9_2015-09-13.tar.bz2 -> xf86-video-nouveau-1.0.12.tar.bz2 ++++++
++++ 23124 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xf86-video-nouveau-1.0.11/ChangeLog new/xf86-video-nouveau-1.0.12/ChangeLog
--- old/xf86-video-nouveau-1.0.11/ChangeLog 2015-11-11 17:18:18.000000000 +0100
+++ new/xf86-video-nouveau-1.0.12/ChangeLog 2015-12-10 03:23:07.000000000 +0100
@@ -1,3 +1,61 @@
+commit b18bc036bf9997ea65f5cbd824fd057931e604fe
+Author: Ben Skeggs
+Date: Tue Dec 8 15:52:25 2015 +1000
+
+ Bump version to 1.0.12
+
+ Various random fixes have been pending for a long while now...
+
+ Signed-off-by: Ben Skeggs
+
+commit 6e6d8ac1c7b4ee047a7b40b95dea1e65a7c3211a
+Author: Mario Kleiner
+Date: Sun Jun 28 02:33:49 2015 +0200
+
+ Take shift in crtc positions for ZaphodHeads configs into account.
+
+ In multi-x-screen ZaphodHeads configurations, there isn't a
+ one-to-one mapping of kernel provided drmmode crtc index
+ to the index of the corresponding xf86Crtc inside the
+ xf86CrtcConfig crtc array anymore, ie. for kernel provided
+ drmmode->mode_res->crtcs[i], the i'th crtc won't correspond
+ to the xf86Crtc in the i'th slot of the x-screens xf86CrtcConfig
+ anymore, once ZaphodHeads has only selected a subset of all crtcs
+ of a graphics card for a given x-screen, instead of all crtcs.
+
+ This breaks the mapping of bit positions in the bit masks returned
+ in kencoder->possible_crtcs and kencoder->possible_clones. A 1 bit
+ in position i of those masks allows use of the kernels i'th crtc for
+ the given kencoder. The X-Servers dix code checks those bit masks
+ for valid xf86Output -> xf86Crtc assignments, assuming that the i'th
+ slot xf86CrtcConfigPtr config->crtc[i] corresponds to bit i in the
+ xf86Output->possibe_crtcs bitmask, and bails if the bitmask doesn't
+ allow the specified assignment of crtc to output. If ZaphodHeads
+ breaks the assumption of bit i <-> crtc slot i this ends in failure.
+
+ Take this shift of crtc index positions wrt. encoder bitmask bit
+ positions into account by bit-shifting positions accordingly when
+ assigning encoder->possible_crtcs to output->possible_crtcs, so
+ the proper indices match up again for validation by the dix.
+
+ This problem wasn't apparent last year when testing the ZaphodHeads
+ support on some Kepler cards, as apparently the encoder->possible_crtcs
+ bitmasks returned for those cards by the kernel just had all 4
+ lsb bits set for all tested encoders/output, so each of the cards 4
+ crtcs could go with each output and things worked by chance.
+
+ The current code breaks, e.g., on 2010 MacBookPro with nv50, where
+ one crtc is hardwired to the internal lvds panel, and one crtc
+ is hardwired to the external DP connector, resulting in a failure
+ where dual-display on single-x-screen works fine, but assigning
+ each output to a separate x-screen via ZaphodHeads fails due to
+ the mismatched encoder->possible_crtcs bitmasks.
+
+ This patch fixes the problem.
+
+ Signed-off-by: Mario Kleiner
+ Signed-off-by: Ben Skeggs
+
commit 1ff13a922535924681b91452235b017e43a4c6f6
Author: Ilia Mirkin
Date: Sun Sep 13 15:29:15 2015 -0400
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xf86-video-nouveau-1.0.11/INSTALL new/xf86-video-nouveau-1.0.12/INSTALL
--- old/xf86-video-nouveau-1.0.11/INSTALL 2015-11-11 17:18:18.000000000 +0100
+++ new/xf86-video-nouveau-1.0.12/INSTALL 2015-12-10 03:23:07.000000000 +0100
@@ -0,0 +1,370 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xf86-video-nouveau-1.0.11/compile new/xf86-video-nouveau-1.0.12/compile
--- old/xf86-video-nouveau-1.0.11/compile 1970-01-01 01:00:00.000000000 +0100
+++ new/xf86-video-nouveau-1.0.12/compile 2015-12-10 03:05:11.000000000 +0100
@@ -0,0 +1,347 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2012-10-14.11; # UTC
+
+# Copyright (C) 1999-2014 Free Software Foundation, Inc.
+# Written by Tom Tromey .
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see http://www.gnu.org/licenses/.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to or send patches to
+# .
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to .
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xf86-video-nouveau-1.0.11/config.h.in new/xf86-video-nouveau-1.0.12/config.h.in
--- old/xf86-video-nouveau-1.0.11/config.h.in 2015-11-11 17:18:13.000000000 +0100
+++ new/xf86-video-nouveau-1.0.12/config.h.in 2015-12-10 03:06:27.000000000 +0100
@@ -44,8 +44,7 @@
/* Have xorg_list API */
#undef HAVE_XORG_LIST
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* Driver date */
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xf86-video-nouveau-1.0.11/configure.ac new/xf86-video-nouveau-1.0.12/configure.ac
--- old/xf86-video-nouveau-1.0.11/configure.ac 2015-11-11 17:08:00.000000000 +0100
+++ new/xf86-video-nouveau-1.0.12/configure.ac 2015-12-10 03:06:18.000000000 +0100
@@ -22,7 +22,7 @@
AC_PREREQ([2.60])
AC_INIT([xf86-video-nouveau],
- [1.0.11],
+ [1.0.12],
[https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
[xf86-video-nouveau])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xf86-video-nouveau-1.0.11/missing new/xf86-video-nouveau-1.0.12/missing
--- old/xf86-video-nouveau-1.0.11/missing 2015-11-11 17:18:00.000000000 +0100
+++ new/xf86-video-nouveau-1.0.12/missing 2015-12-10 03:05:11.000000000 +0100
@@ -1,9 +1,9 @@
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-06-26.16; # UTC
+scriptversion=2013-10-28.13; # UTC
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2014 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
@@ -160,7 +160,7 @@
;;
autom4te*)
echo "You might have modified some maintainer files that require"
- echo "the 'automa4te' program to be rebuilt."
+ echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xf86-video-nouveau-1.0.11/src/drmmode_display.c new/xf86-video-nouveau-1.0.12/src/drmmode_display.c
--- old/xf86-video-nouveau-1.0.11/src/drmmode_display.c 2015-11-11 17:08:00.000000000 +0100
+++ new/xf86-video-nouveau-1.0.12/src/drmmode_display.c 2015-12-10 03:06:18.000000000 +0100
@@ -1211,7 +1211,7 @@
}
static unsigned int
-drmmode_output_init(ScrnInfoPtr pScrn, drmmode_ptr drmmode, int num)
+drmmode_output_init(ScrnInfoPtr pScrn, drmmode_ptr drmmode, int num, int crtcshift)
{
NVPtr pNv = NVPTR(pScrn);
xf86OutputPtr output;
@@ -1293,8 +1293,8 @@
output->subpixel_order = subpixel_conv_table[koutput->subpixel];
output->driver_private = drmmode_output;
- output->possible_crtcs = kencoder->possible_crtcs;
- output->possible_clones = kencoder->possible_clones;
+ output->possible_crtcs = kencoder->possible_crtcs >> crtcshift;
+ output->possible_clones = kencoder->possible_clones >> crtcshift;
output->interlaceAllowed = true;
output->doubleScanAllowed = true;
@@ -1415,6 +1415,7 @@
NVEntPtr pNVEnt = NVEntPriv(pScrn);
int i;
unsigned int crtcs_needed = 0;
+ int crtcshift;
drmmode = xnfalloc(sizeof *drmmode);
drmmode->fd = fd;
@@ -1438,8 +1439,9 @@
}
xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Initializing outputs ...\n");
+ crtcshift = ffs(pNVEnt->assigned_crtcs ^ 0xffffffff) - 1;
for (i = 0; i < drmmode->mode_res->count_connectors; i++)
- crtcs_needed += drmmode_output_init(pScrn, drmmode, i);
+ crtcs_needed += drmmode_output_init(pScrn, drmmode, i, crtcshift);
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
"%d crtcs needed for screen.\n", crtcs_needed);
