Hello community,
here is the log from the commit of package daps for openSUSE:Factory checked in at 2015-07-21 13:27:07
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/daps (Old)
and /work/SRC/openSUSE:Factory/.daps.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "daps"
Changes:
--------
--- /work/SRC/openSUSE:Factory/daps/daps.changes 2015-07-08 06:59:43.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.daps.new/daps.changes 2015-07-21 13:27:10.000000000 +0200
@@ -1,0 +2,27 @@
+Fri Jul 10 08:38:00 UTC 2015 - fsundermeyer@opensuse.org
+
+- Stable release DAPS 2.1.1:
+
+* Bugfixes:
+ - Fix for issue #274 (PDF Index Building Fails Because of Empty
+ Profiling Directory)
+ - fix for issue #275 (Avoid Same Target Names in Different
+ Makefiles)
+ - fix for issue #276 (PROFILE_URN Detection Depends on Position of PI
+ in Document)
+ - fix for issue #277 (Debugging Targets Fail when xml:lang is
+ not set)
+ - fix for issue #278 (Avoid Using "LANGUAGE" as a Variable Name)
+ - fix for issue #280 (Webhelp: Common/ Directory Contains Dead
+ Symbolic Links)
+
+* New Features:
+ - added support for profiling attribute "outputformat" by
+ intrducing PROFOUTPUTFORMAT (issue #279)
+
+* Miscellaneous:
+ - replaced Chinese font "FZSongTi" with "wqy-microhei" in the
+ default config file for XEP
+ (XEP_CONFIG_FILE=etc/xep/xep-daps.xml)
+
+-------------------------------------------------------------------
Old:
----
daps-2.1.tar.bz2
New:
----
daps-2.1.1.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ daps.spec ++++++
--- /var/tmp/diff_new_pack.QKQymt/_old 2015-07-21 13:27:11.000000000 +0200
+++ /var/tmp/diff_new_pack.QKQymt/_new 2015-07-21 13:27:11.000000000 +0200
@@ -17,7 +17,7 @@
Name: daps
-Version: 2.1
+Version: 2.1.1
Release: 0
###############################################################
++++++ daps-2.1.tar.bz2 -> daps-2.1.1.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/daps/ChangeLog new/daps/ChangeLog
--- old/daps/ChangeLog 2015-07-02 17:46:15.000000000 +0200
+++ new/daps/ChangeLog 2015-07-10 10:18:13.000000000 +0200
@@ -1,5 +1,32 @@
-------------------------------------------------------------------
-Fri Jul 02 14:38:11 UTC 2015 - fsundermeyer@opensuse.org
+Fri Jul 10 07:47:38 UTC 2015 - fsundermeyer@opensuse.org
+
+Stable release DAPS 2.1.1:
+
+* Bugfixes:
+ - Fix for issue #274 (PDF Index Building Fails Because of Empty
+ Profiling Directory)
+ - fix for issue #275 (Avoid Same Target Names in Different
+ Makefiles)
+ - fix for issue #276 (PROFILE_URN Detection Depends on Position of PI
+ in Document)
+ - fix for issue #277 (Debugging Targets Fail when xml:lang is
+ not set)
+ - fix for issue #278 (Avoid Using "LANGUAGE" as a Variable Name)
+ - fix for issue #280 (Webhelp: Common/ Directory Contains Dead
+ Symbolic Links)
+
+* New Features:
+ - added support for profiling attribute "outputformat" by
+ intrducing PROFOUTPUTFORMAT (issue #279)
+
+* Miscellaneous:
+ - replaced Chinese font "FZSongTi" with "wqy-microhei" in the
+ default config file for XEP
+ (XEP_CONFIG_FILE=etc/xep/xep-daps.xml)
+
+-------------------------------------------------------------------
+Thu Jul 02 14:38:11 UTC 2015 - fsundermeyer@opensuse.org
Stable release DAPS 2.1:
- added support for webhelp
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/daps/INSTALL.adoc new/daps/INSTALL.adoc
--- old/daps/INSTALL.adoc 2015-07-02 17:46:15.000000000 +0200
+++ new/daps/INSTALL.adoc 2015-07-10 10:18:13.000000000 +0200
@@ -115,7 +115,7 @@
=== Installation
-1. Download the https://github.com/openSUSE/daps/archive/2.1.tar.gz[DAPS 2.1]
+1. Download the https://github.com/openSUSE/daps/archive/2.1.1.tar.gz[DAPS 2.1.1]
archive and unpack it _or_, alternatively clone the master branch from GitHub: +
`git clone https://github.com/openSUSE/daps.git -b master --single-branch`
2. Change into the daps directory
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/daps/README.adoc new/daps/README.adoc
--- old/daps/README.adoc 2015-07-02 17:46:15.000000000 +0200
+++ new/daps/README.adoc 2015-07-10 10:18:13.000000000 +0200
@@ -20,8 +20,8 @@
also been successfully tested on Debian, Fedora, and Ubuntu. See
https://github.com/openSUSE/daps/blob/master/INSTALL.adoc for installation
instructions.
-The latest version, https://github.com/openSUSE/daps/archive/2.1.tar.gz[DAPS
-2.1], was released on 2015-07-02.
+The latest version, https://github.com/openSUSE/daps/archive/2.1.1.tar.gz[DAPS
+2.1.1], was released on 2015-07-10.
Contributing
------------
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/daps/bin/daps.in new/daps/bin/daps.in
--- old/daps/bin/daps.in 2015-07-02 17:46:15.000000000 +0200
+++ new/daps/bin/daps.in 2015-07-10 10:18:13.000000000 +0200
@@ -116,6 +116,7 @@
PROFILE_URN
PROFLANG
PROFOS
+ PROFOUTPUTFORMAT
PROFREVISION
PROFREVISIONFLAG
PROFROLE
@@ -181,7 +182,7 @@
)
unset "${UNSETLIST[@]}"
-# PATHLIST contains all variables holding a path. Relative paths need to be
+# PATHLIST contains all variables holding a path. Relative paths need to be
# made absolute and we need this list in order to know which variables hold
# path information
#
@@ -214,7 +215,7 @@
# default config file
DEFAULT_CONFIG="@sysconfdir@/daps/config"
-# The default DAPSROOT
+# The default DAPSROOT
DAPSROOT_DEFAULT="@pkgdatadir@"
# default libdir
@@ -240,7 +241,7 @@
# Fake Associative Array (for bash 3 compatibility)
# Key = subcommand
# Value = function call (from lib/daps_functions)
-#
+#
# use VALUE=$(arrayGet "ARRAYNAME" "KEY") to get the value
# arrayGet returns 1 if KEY was not found
#
@@ -635,7 +636,7 @@
--commands Show a list of available DAPS sub commands
--debug Print debugging messages. Alternatively see the
--verbose options for an output that is better
- readable.
+ readable.
--docconfig=DC-file,
-d DC-file Path to doc config file to use. Mandatory
unless there is only a single DC-file in the current
@@ -677,7 +678,7 @@
the XML files. Currently supported are \"xsltproc\"
and \"saxon\" (version 6).
Default: xsltproc
-
+
Subcommands:
help Print this help
@@ -686,7 +687,7 @@
html HTML book (chunked or single file HTML, jsp)
man man pages
mobi Amazon Kindle eBook
- pdf PDF book (color, grayscale, printable)
+ pdf PDF book (color, grayscale, printable)
text ASCII book
webhelp HTML book with collapsable TOC and search
@@ -832,7 +833,7 @@
# $3 = additional base dir for $1 (optional)
#
# sets absolute path without trailing / for $1, links are being followed
- # also tests if paths are valid
+ # also tests if paths are valid
#
# in case of a non-existing path, returns 2 if variablename matches
# _WRAPPER, else returns 1
@@ -855,7 +856,7 @@
MYPATH=${MYPATH%/} # remove trailing slash
if [[ $MYPATH =~ ^~.* ]]; then
- # 2. Replace ~/ with $HOME
+ # 2. Replace ~/ with $HOME
if [[ $MYPATH =~ ^~/.* ]]; then
MYPATH=${MYPATH/#\~\//$HOME/}
else
@@ -1016,7 +1017,7 @@
export POSIXLY_CORRECT=1
-# So, the first getopt go will parse all parameters listed directly after the
+# So, the first getopt go will parse all parameters listed directly after the
# daps command, leaving an array ($@) with the subcommand and it's
# parameters, which can be parsed in a second getopt go.
@@ -1026,7 +1027,7 @@
# If variables such as $BUILD_DIR, $DOCCONF, and $DAPSROOT are set via command
# line switch, we do not want to overwrite them by any other file we source
# at a later stage (command line always wins).
-# Declaring the variables as readonly is unfortunately not an option, since
+# Declaring the variables as readonly is unfortunately not an option, since
# every attempt to (un)set a read-only variable throws an error - something
# we do not want when sourcing a config-file.
# Therefore we need to save each variable twice in order to recover the
@@ -1240,7 +1241,7 @@
# The environment is set up using the following hierachy
# (1 == always wins)
#
-# 1. Command line
+# 1. Command line
# - either as a real option
# - or as variable declaration (FOO=bar) --> debugging and developing
# 2. DC-file
@@ -1251,7 +1252,7 @@
# DAPSROOT, allowing to have multiple daps versions installed into
# different directories. You can switch between them by setting DAPSROOT
# accordingly. Either by command line switch --dtdroot or in your user
-# config file (DAPSROOT="<path>")
+# config file (DAPSROOT="<path>")
#
# Since commandline values take precedence we need to recover them every
# time we source a file
@@ -1262,7 +1263,7 @@
############# INTERLUDE: Copy/Move USER_CONFIG_OLD #####################
#
-# Move/copy an old DAPS config directory to ~/.config if not already existing
+# Move/copy an old DAPS config directory to ~/.config if not already existing
#
MOVE_CONFIG=""
if [[ -f $USER_CONFIG_OLD && ! -f $USER_CONFIG ]]; then
@@ -1550,7 +1551,7 @@
DOCBOOK_VERSION=$($XSLTPROC --stylesheet "${DAPSROOT}/daps-xslt/common/get-docbook-version.xsl" --file "$MAIN" "$XSLTPROCESSOR") || exit_on_error "Could not get DocBook version. Seems $MAIN is either not well-formed."
# || { DOCBOOK_VERSION=4; \
-# "Could not get DocBook version, assuming DocBook 4"; }
+# "Could not get DocBook version, assuming DocBook 4"; }
# ... now resolve the style URI via catalogs
if [[ 5 = "$DOCBOOK_VERSION" ]]; then
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/daps/configure new/daps/configure
--- old/daps/configure 2015-07-02 17:46:15.000000000 +0200
+++ new/daps/configure 2015-07-10 10:18:13.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for DAPS 2.1.0.
+# Generated by GNU Autoconf 2.69 for DAPS 2.1.1.
#
# Report bugs to https://github.com/openSUSE/daps.
#
@@ -580,8 +580,8 @@
# Identity of this package.
PACKAGE_NAME='DAPS'
PACKAGE_TARNAME='daps'
-PACKAGE_VERSION='2.1.0'
-PACKAGE_STRING='DAPS 2.1.0'
+PACKAGE_VERSION='2.1.1'
+PACKAGE_STRING='DAPS 2.1.1'
PACKAGE_BUGREPORT='https://github.com/openSUSE/daps'
PACKAGE_URL='http://opensuse.github.io/daps'
@@ -1264,7 +1264,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures DAPS 2.1.0 to adapt to many kinds of systems.
+\`configure' configures DAPS 2.1.1 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1330,7 +1330,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of DAPS 2.1.0:";;
+ short | recursive ) echo "Configuration of DAPS 2.1.1:";;
esac
cat <<\_ACEOF
@@ -1419,7 +1419,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-DAPS configure 2.1.0
+DAPS configure 2.1.1
generated by GNU Autoconf 2.69
Copyright (C) 2012 Free Software Foundation, Inc.
@@ -1436,7 +1436,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by DAPS $as_me 2.1.0, which was
+It was created by DAPS $as_me 2.1.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
@@ -1788,8 +1788,8 @@
DAPS_VERSION_MAJOR=2
DAPS_VERSION_MINOR=1
-DAPS_VERSION_MICRO=0
-DAPS_VERSION=2.1.0
+DAPS_VERSION_MICRO=1
+DAPS_VERSION=2.1.1
DAPS_API_VERSION=2
@@ -2349,7 +2349,7 @@
# Define the identity of the package.
PACKAGE='daps'
- VERSION='2.1.0'
+ VERSION='2.1.1'
cat >>confdefs.h <<_ACEOF
@@ -4537,7 +4537,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by DAPS $as_me 2.1.0, which was
+This file was extended by DAPS $as_me 2.1.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -4591,7 +4591,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-DAPS config.status 2.1.0
+DAPS config.status 2.1.1
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
@@ -5746,7 +5746,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by DAPS $as_me 2.1.0, which was
+This file was extended by DAPS $as_me 2.1.1, which was
generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -5800,7 +5800,7 @@
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-DAPS config.status 2.1.0
+DAPS config.status 2.1.1
configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/daps/configure.ac new/daps/configure.ac
--- old/daps/configure.ac 2015-07-02 17:46:15.000000000 +0200
+++ new/daps/configure.ac 2015-07-10 10:18:13.000000000 +0200
@@ -11,7 +11,7 @@
m4_define(daps_version_major, 2)
m4_define(daps_version_minor, 1)
-m4_define(daps_version_micro, [0])
+m4_define(daps_version_micro, [1])
# API version
m4_define([daps_api_version],[daps_version_major])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/daps/daps-xslt/common/get-xml-stylesheet.xsl new/daps/daps-xslt/common/get-xml-stylesheet.xsl
--- old/daps/daps-xslt/common/get-xml-stylesheet.xsl 2015-07-02 17:46:15.000000000 +0200
+++ new/daps/daps-xslt/common/get-xml-stylesheet.xsl 2015-07-10 10:18:13.000000000 +0200
@@ -20,8 +20,7 @@
-->
-