Hello community,
here is the log from the commit of package collectl for openSUSE:Factory checked in at 2015-06-01 09:53:53
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/collectl (Old)
and /work/SRC/openSUSE:Factory/.collectl.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "collectl"
Changes:
--------
--- /work/SRC/openSUSE:Factory/collectl/collectl.changes 2015-04-25 11:25:50.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.collectl.new/collectl.changes 2015-06-01 09:53:54.000000000 +0200
@@ -1,0 +2,13 @@
+Thu May 28 18:34:49 UTC 2015 - tabraham@suse.com
+
+- Update to 4.0.2
+ * add /bin/bash to list of 'known shells' excluded from output with
+ --procopt k
+ * generalize ethernet network device name to include ALL names
+ matching type 'p\dp' so we pick up p2p, p3p, p4p... [thanks Matt]
+ * collect nr_shmem so we can track shared memory, apparently something
+ I thought of but never acted on [thanks Christian]
+ * do not include guest cpu metrics in totals since already accounted
+ for in user time
+
+-------------------------------------------------------------------
Old:
----
collectl-4.0.0.src.tar.gz
New:
----
collectl-4.0.2.src.tar.gz
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ collectl.spec ++++++
--- /var/tmp/diff_new_pack.6MBDHt/_old 2015-06-01 09:53:55.000000000 +0200
+++ /var/tmp/diff_new_pack.6MBDHt/_new 2015-06-01 09:53:55.000000000 +0200
@@ -17,7 +17,7 @@
Name: collectl
-Version: 4.0.0
+Version: 4.0.2
Release: 0
Summary: Collects data that describes the current system status
License: Artistic-1.0 and GPL-2.0+
++++++ collectl-4.0.0.src.tar.gz -> collectl-4.0.2.src.tar.gz ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/collectl-4.0.0/RELEASE-collectl new/collectl-4.0.2/RELEASE-collectl
--- old/collectl-4.0.0/RELEASE-collectl 2015-03-10 20:52:21.000000000 +0100
+++ new/collectl-4.0.2/RELEASE-collectl 2015-05-27 15:02:55.000000000 +0200
@@ -13,24 +13,13 @@
Configure to start on boot
- In both cases, collectl will not be configured to start on boot
- but can easily be set to do so with the command:
+ On RedHat based installations, collectl will not be configured to start
+ on boot, but can easily be set to do so with the command:
chkconfig collectl on
KNOWN PROBLEMS/RESTRICTIONS
- - There is a known problem with older perl Time::HiRes modules, newer
- versions of glibc and colletcl intervals of 1 second or greater (see
- http://collectl.sourceforge.net/HiResTime.html for more details) that
- can result in 'setitimer' messages being logged at system startup when
- collectl has been configured to run as a daemon. these messages appear
- to benign, but be sure to let someone know if that proves not to be the
- case. If collectl determines your system has this mismatch, it will
- report it as a warning in collectl's message file in /var/log/collectl
- every time it starts as a daemon. If you choose, you can easily turn
- off the checking by editing the entry at the bottom of /etc/collectl.conf
- named TimeHiResCheck and setting it to 0.
- if system time is changed by more then the log rolling frequency after
collectl starts, multiple log files will be created during the next polling
cycle(s)
@@ -38,6 +27,31 @@
COLLECTL CHANGES
+4.0.2 May 27, 2015
+ - add /bin/bash to list of 'known shells' excluded from output with
+ --procopt k
+ - generalize ethernet network device name to include ALL names
+ matching type 'p\dp' so we pick up p2p, p3p, p4p... [thanks Matt]
+ - collect nr_shmem so we can track shared memory, apparently something
+ I thought of but never acted on [thanks Christian]
+ - do not include guest cpu metrics in totals since already accounted
+ for in user time
+
+4.0.1
+ - change /usr/sbin to /usr/bin in init.d/collectl [thanks Ladislav]
+ - pattern match to exclude partitions from disk summary is WRONG and
+ we need to make sure name doesn't match cciss disks like c0d0!
+ [thanks, Laurent]
+ - changed help text for -retaddr to NOT use 'use' preceding -deb because
+ rpmbuild gets confused ang tries to include '-deb' as a dependency
+ [thanks dan]
+ - include 'en' network devices in summary data [thanks homerl]
+ - change buddyinfo to deal with less fields in /proc/buddyinfo as apparently
+ there are not always 11 of them [thanks greg]
+ - remove lustre from --showsubsys
+ - removed 'known problem' with older versions of Time::HiRes in these
+ release notes as that was quite a long time ago
+
4.0.0 Mar 9, 2015
- rare, but if selecting processes by parent pid or command name, it's
possible when a new pid is seen that it's already exited by the time
@@ -56,14 +70,18 @@
COLMUX CHANGES
+4.9.0 ???
+ - header name printing in single line mode not quite right for all
+ combinations of switches
+
4.8.3 Mar 9, 2015
-- -oT -test wasn't including time column in help output whereas -od and -oD
- did [thanks, robbin]
-- new switch: -retaddr tells collectl to connect back to this address rather
- than the one colmux chooses by default which is default interface's addr
-- change in way return address is determined because RHEL 7 changed the
- format of the ifconfig output, changing Bcast to broadcast and dropping
- addr: [thanks hank]
+ - -oT -test wasn't including time column in help output whereas -od and -oD
+ did [thanks, robbin]
+ - new switch: -retaddr tells collectl to connect back to this address rather
+ than the one colmux chooses by default which is default interface's addr
+ - change in way return address is determined because RHEL 7 changed the
+ format of the ifconfig output, changing Bcast to broadcast and dropping
+ addr: [thanks hank]
PRE-4.0 COLLECTL CHANGES
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/collectl-4.0.0/collectl new/collectl-4.0.2/collectl
--- old/collectl-4.0.0/collectl 2015-03-10 20:52:21.000000000 +0100
+++ new/collectl-4.0.2/collectl 2015-05-27 15:02:55.000000000 +0200
@@ -111,7 +111,7 @@
$rootFlag=(!$PcFlag && `whoami`=~/root/) ? 1 : 0;
$SrcArch= $Config{"archname"};
-$Version= '4.0.0-1';
+$Version= '4.0.2-1';
$Copyright='Copyright 2003-2015 Hewlett-Packard Development Company, L.P.';
$License= "collectl may be copied only under the terms of either the Artistic License\n";
$License.= "or the GNU General Public License, which may be found in the source kit";
@@ -3841,7 +3841,7 @@
# Memory
elsif ($type==5)
{
- next if $line=~/^nr/;
+ next if $line=~/^nr/ && $line!~/^nr_sh/;
next if $line=~/^numa/;
last if $memOpts!~/[ps]/ && $line=~/^pgre/; # ignore from pgrefill forward
last if $memOpts!~/s/ && $line=~/^pgst/; # ignore from pgstead forward
@@ -6367,7 +6367,6 @@
f - nfs
i - inodes
j - interrupts by CPU
- l - lustre
m - memory
n - network
s - sockets
@@ -6382,7 +6381,6 @@
E - environmental (fan, power, temp) [requires ipmitool]
F - nfs data
J - interrupts by CPU by interrupt number
- L - lustre
M - memory numa/node
N - individual Networks
T - tcp details (lots of data!)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/collectl-4.0.0/colmux new/collectl-4.0.2/colmux
--- old/collectl-4.0.0/colmux 2015-03-10 20:52:21.000000000 +0100
+++ new/collectl-4.0.2/colmux 2015-05-27 15:02:55.000000000 +0200
@@ -65,7 +65,7 @@
my $Collectl='/usr/bin/collectl';
my $Program='colmux';
-my $Version='4.8.3';
+my $Version='4.9.0';
my $Copyright='Copyright 2005-2014 Hewlett-Packard Development Company, L.P.';
my $License="colmux may be copied only under the terms of either the Artistic License\n";
$License.= "or the GNU General Public License, which may be found in the source kit";
@@ -657,10 +657,12 @@
{
exit if !reformatHeaders();
+ print "LASTHEADER: $lastHeader\n";
foreach my $col (split(/\s+/, $lastHeader))
{
# strip detail field names including surrounding []s
$col=~s/\[.*\]// if $colnoinstFlag;
+ print "PUSH: $col\n";
push @headernames, $col;
}
}
@@ -1740,14 +1742,16 @@
$datetime.=' ' if $options=~/m/;
my $dtpad=' ' x length($datetime);
- # write name of column over each set of hostnames, noting there's an
- # extra column for hostname so we need to subtract one
+ # write name of column over each set of hostnames
print $dtpad;
for (my $i=0; $i<@columns; $i++)
{
for (my $j=0; $j<@hostnames; $j++)
{
- my $col=$columns[$i]-1;
+ # note that because of the way the header names are stored (which DO include
+ # a timestamp), we need to skip printing date/timestamps when -o not specified
+ my $col=($options=~/[TdD]/ || $plotFlag) ? $columns[$i]-1 : $columns[$i];
+
if ($j==0)
{
printf " %-${colwidth}s", @headernames ? $headernames[$col] : '???';
@@ -1784,7 +1788,7 @@
print ' | ' if !$colnodetFlag;
for (my $i=0; $i<@columns; $i++)
{
- my $col=(!$plotFlag) ? $columns[$i] : $columns[$i]-1;
+ my $col=($plotFlag || $options=~/[TdD]/) ? $columns[$i]-1 : $columns[$i];
printf " %${wider}s", @headernames ? $headernames[$col] : '???';
}
}
@@ -2338,7 +2342,7 @@
-keepalive secs pass this in the ssh command as '-o ServerAliveInterval=secs'
to prevent ssh exiting early from an inactive ssh connection
-retaddr addr tell collectl to connect back to this address.
- use -deb 1 to see address collectl told to use
+ start with -deb 1 to see address collectl told to use
-timeout secs use this timeout for remote collectl to connect back
requires collectl V3.6.4 or better
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/collectl-4.0.0/formatit.ph new/collectl-4.0.2/formatit.ph
--- old/collectl-4.0.0/formatit.ph 2015-03-10 20:52:21.000000000 +0100
+++ new/collectl-4.0.2/formatit.ph 2015-05-27 15:02:55.000000000 +0200
@@ -2489,7 +2489,7 @@
$buddyZone[$budIndex]=$fields[3];
$buddyNode[$budIndex]=~s/,$//;
- for (my $i=0; $i<11; $i++)
+ for (my $i=0; $i