commit xvinfo for openSUSE:Factory

Hello community, here is the log from the commit of package xvinfo for openSUSE:Factory checked in at 2015-05-05 00:56:15 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/xvinfo (Old) and /work/SRC/openSUSE:Factory/.xvinfo.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "xvinfo" Changes: -------- --- /work/SRC/openSUSE:Factory/xvinfo/xvinfo.changes 2014-02-07 11:57:18.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.xvinfo.new/xvinfo.changes 2015-05-05 00:56:17.000000000 +0200 @@ -1,0 +2,11 @@ +Mon May 4 14:36:25 UTC 2015 - sndirsch@suse.com + +- Use progname for error messages as well + * Convert sprintf call to use snprintf + * Make ImageEncodings unsigned + * configure: Drop AM_MAINTAINER_MODE + * autogen.sh: Honor NOCONFIGURE=1 + * Print which option was in error along with usage message + * Use real program name for help message + +------------------------------------------------------------------- Old: ---- xvinfo-1.1.2.tar.bz2 New: ---- xvinfo-1.1.3.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ xvinfo.spec ++++++ --- /var/tmp/diff_new_pack.rjbNdM/_old 2015-05-05 00:56:18.000000000 +0200 +++ /var/tmp/diff_new_pack.rjbNdM/_new 2015-05-05 00:56:18.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package xvinfo # -# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: xvinfo -Version: 1.1.2 +Version: 1.1.3 Release: 0 Summary: Utility to print X-Video extension adaptor information License: X11 ++++++ xvinfo-1.1.2.tar.bz2 -> xvinfo-1.1.3.tar.bz2 ++++++ ++++ 8032 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.2/ChangeLog new/xvinfo-1.1.3/ChangeLog --- old/xvinfo-1.1.2/ChangeLog 2013-02-11 01:44:36.000000000 +0100 +++ new/xvinfo-1.1.3/ChangeLog 2015-05-01 08:05:41.000000000 +0200 @@ -1,3 +1,88 @@ +commit ec76226d2986b1a77c9c021bb9b41e59bd839ed4 +Author: Alan Coopersmith +Date: Thu Apr 30 23:03:01 2015 -0700 + + xvinfo 1.1.3 + + Signed-off-by: Alan Coopersmith + +commit 5f47bf1a212b957009a85207338ee5b1d6ec6340 +Author: Alan Coopersmith +Date: Tue Jun 3 23:36:56 2014 -0700 + + Print which option was in error along with usage message + + Signed-off-by: Alan Coopersmith + +commit 9798300fc71af02f8725bc7b4da47a4b8676f5ab +Author: Alan Coopersmith +Date: Tue Jun 3 23:32:31 2014 -0700 + + autogen.sh: Honor NOCONFIGURE=1 + + See http://people.gnome.org/~walters/docs/build-api.txt + + Signed-off-by: Alan Coopersmith + +commit 169e0dd0a3e1740d7621d214494374c99dbc75ce +Author: Alan Coopersmith +Date: Tue Jun 3 23:32:31 2014 -0700 + + configure: Drop AM_MAINTAINER_MODE + + Signed-off-by: Alan Coopersmith + +commit ca5ed1edbb7a71ea166868b80dd02a210c2a8f05 +Author: Alan Coopersmith +Date: Fri Oct 18 22:17:03 2013 -0700 + + Make ImageEncodings unsigned + + Starts at 0 and increments to count encodings - should never go negative. + + Fixes clang warnings: + + xvinfo.c:184:31: warning: implicit conversion changes signedness: 'int' to + 'unsigned int' [-Wsign-conversion] + if (nencode - ImageEncodings) { + ~ ^~~~~~~~~~~~~~ + + xvinfo.c:186:39: warning: implicit conversion changes signedness: 'int' to + 'unsigned int' [-Wsign-conversion] + nencode - ImageEncodings); + ~ ^~~~~~~~~~~~~~ + + Signed-off-by: Alan Coopersmith + +commit 8a4d6f5bd95f5ad7608a7871bc6822935e4a191b +Author: Alan Coopersmith +Date: Fri Oct 18 22:12:12 2013 -0700 + + Convert sprintf call to use snprintf + + Should be impossible to overflow with previous sprintf code, but + still safer to avoid bugs if something changes in the future. + + Signed-off-by: Alan Coopersmith + +commit d61cb117c170b23b9fbaf619c2a1e54b9f987a90 +Author: Alan Coopersmith +Date: Sun Jul 7 10:47:47 2013 -0700 + + Use progname for error messages as well + + Signed-off-by: Alan Coopersmith + +commit af9ea390e95320e683c761cbd61eaf1c0dbaefed +Author: Stéphane Aulery +Date: Sun Jul 7 03:15:39 2013 +0200 + + Use real program name for help message + + Signed-off-by: Stéphane Aulery + Reviewed-by: Alan Coopersmith + Signed-off-by: Alan Coopersmith + commit 6114ecae7d7aa0bed41d01d360b193f27a500942 Author: Alan Coopersmith Date: Sun Feb 10 16:44:06 2013 -0800 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.2/INSTALL new/xvinfo-1.1.3/INSTALL --- old/xvinfo-1.1.2/INSTALL 2013-02-11 01:44:36.000000000 +0100 +++ new/xvinfo-1.1.3/INSTALL 2015-05-01 08:05:41.000000000 +0200 @@ -1,11 +1,13 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, -2006, 2007, 2008 Free Software Foundation, Inc. +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== @@ -13,7 +15,11 @@ Briefly, the shell commands `./configure; make; make install' should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for -instructions specific to this package. +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -42,7 +48,7 @@ you want to change it or regenerate `configure' using a newer version of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type `./configure' to configure the package for your system. @@ -53,12 +59,22 @@ 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. - 5. You can remove the program binaries and object files from the + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,8 +83,15 @@ all sorts of other programs in order to regenerate files that came with the distribution. - 6. Often, you can also type `make uninstall' to remove the installed - files again. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. Compilers and Options ===================== @@ -93,7 +116,8 @@ own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. With a non-GNU `make', it is safer to compile the package for one architecture at a time in the source code directory. After you have @@ -120,7 +144,8 @@ By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving -`configure' the option `--prefix=PREFIX'. +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you @@ -131,15 +156,46 @@ In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE @@ -152,6 +208,13 @@ you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + Particular systems ================== @@ -159,10 +222,15 @@ CC is not installed, it is recommended to use the following options in order to use an ANSI C compiler: - ./configure CC="cc -Ae" + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" and if that doesn't work, install pre-built binaries of GCC for HP-UX. + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot parse its `' header file. The option `-nodtk' can be used as a workaround. If GNU CC is not installed, it is therefore recommended @@ -174,6 +242,16 @@ ./configure CC="cc -nodtk" + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== @@ -189,7 +267,8 @@ where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't @@ -277,7 +356,7 @@ `configure' can determine that directory automatically. `--prefix=DIR' - Use DIR as the installation prefix. *Note Installation Names:: + Use DIR as the installation prefix. *note Installation Names:: for more details, including other options available for fine-tuning the installation locations. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.2/compile new/xvinfo-1.1.3/compile --- old/xvinfo-1.1.2/compile 1970-01-01 01:00:00.000000000 +0100 +++ new/xvinfo-1.1.3/compile 2015-05-01 08:03:17.000000000 +0200 @@ -0,0 +1,347 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-10-14.11; # UTC + +# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see http://www.gnu.org/licenses/. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + if test -f "$dir/lib$lib.a"; then + found=yes + lib=$dir/lib$lib.a + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.2/configure.ac new/xvinfo-1.1.3/configure.ac --- old/xvinfo-1.1.2/configure.ac 2013-02-11 01:44:09.000000000 +0100 +++ new/xvinfo-1.1.3/configure.ac 2015-05-01 08:03:10.000000000 +0200 @@ -23,14 +23,13 @@ # Initialize Autoconf AC_PREREQ([2.60]) -AC_INIT([xvinfo], [1.1.2], +AC_INIT([xvinfo], [1.1.3], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [xvinfo]) AC_CONFIG_SRCDIR([Makefile.am]) AC_CONFIG_HEADERS([config.h]) # Initialize Automake AM_INIT_AUTOMAKE([foreign dist-bzip2]) -AM_MAINTAINER_MODE # Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS m4_ifndef([XORG_MACROS_VERSION], @@ -39,7 +38,7 @@ XORG_DEFAULT_OPTIONS # Checks for pkg-config packages -PKG_CHECK_MODULES(XVINFO, [xv x11 xproto >= 7.0.17]) +PKG_CHECK_MODULES(XVINFO, [xv x11 xproto >= 7.0.25]) AC_CONFIG_FILES([ Makefile diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.2/missing new/xvinfo-1.1.3/missing --- old/xvinfo-1.1.2/missing 2013-02-11 01:44:17.000000000 +0100 +++ new/xvinfo-1.1.3/missing 2015-05-01 08:03:17.000000000 +0200 @@ -1,11 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2009-04-28.21; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -26,69 +25,40 @@ # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to ." exit $? @@ -100,272 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.2/xvinfo.c new/xvinfo-1.1.3/xvinfo.c --- old/xvinfo-1.1.2/xvinfo.c 2013-02-11 01:44:09.000000000 +0100 +++ new/xvinfo-1.1.3/xvinfo.c 2015-05-01 08:03:10.000000000 +0200 @@ -10,10 +10,13 @@ #include #include -static void _X_NORETURN +static char *progname; + +static void _X_NORETURN _X_COLD PrintUsage(void) { - fprintf(stderr, "Usage: xvinfo [-display host:dpy] [-short] [-version]\n"); + fprintf(stderr, "Usage: %s [-display host:dpy] [-short] [-version]\n", + progname); exit(0); } @@ -33,14 +36,20 @@ char *disname = NULL; char shortmode = 0; + progname = argv[0]; + if ((argc > 4)) PrintUsage(); if (argc != 1) { for (i = 1; i < argc; i++) { if (!strcmp(argv[i], "-display")) { - disname = argv[i + 1]; - i++; + if (++i >= argc) { + fprintf (stderr, "%s: missing argument to -display\n", + progname); + PrintUsage(); + } + disname = argv[i]; } else if (!strcmp(argv[i], "-short")) shortmode = 1; @@ -49,19 +58,21 @@ exit(0); } else { + fprintf (stderr, "%s: unrecognized argument '%s'\n", + progname, argv[i]); PrintUsage(); } } } if (!(dpy = XOpenDisplay(disname))) { - fprintf(stderr, "xvinfo: Unable to open display %s\n", + fprintf(stderr, "%s: Unable to open display %s\n", progname, (disname != NULL) ? disname : XDisplayName(NULL)); exit(-1); } if ((Success != XvQueryExtension(dpy, &ver, &rev, &reqB, &eventB, &errorB))) { - fprintf(stderr, "xvinfo: No X-Video Extension on %s\n", + fprintf(stderr, "%s: No X-Video Extension on %s\n", progname, (disname != NULL) ? disname : XDisplayName(NULL)); exit(0); } @@ -170,7 +181,7 @@ XvQueryEncodings(dpy, ainfo[j].base_id, &nencode, &encodings); if (encodings && nencode) { - int ImageEncodings = 0; + unsigned int ImageEncodings = 0; for (n = 0; n < nencode; n++) { if (!strcmp(encodings[n].name, "XV_IMAGE")) @@ -196,8 +207,6 @@ } if (ImageEncodings && (ainfo[j].type & XvImageMask)) { - char imageName[5]; - for (n = 0; n < nencode; n++) { if (!strcmp(encodings[n].name, "XV_IMAGE")) { fprintf(stdout, @@ -214,7 +223,10 @@ numImages); for (n = 0; n < numImages; n++) { - sprintf(imageName, "%c%c%c%c", formats[n].id & 0xff, + char imageName[5]; + + snprintf(imageName, sizeof(imageName), "%c%c%c%c", + formats[n].id & 0xff, (formats[n].id >> 8) & 0xff, (formats[n].id >> 16) & 0xff, (formats[n].id >> 24) & 0xff);