Hello community,
here is the log from the commit of package socat.546 for openSUSE:11.4:Update checked in at 2012-07-02 17:18:34
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:11.4:Update/socat.546 (Old)
and /work/SRC/openSUSE:11.4:Update/.socat.546.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "socat.546", Maintainer is ""
Changes:
--------
New Changes file:
--- /dev/null 2012-06-28 07:48:42.835576985 +0200
+++ /work/SRC/openSUSE:11.4:Update/.socat.546.new/socat.changes 2012-07-02 17:18:36.000000000 +0200
@@ -0,0 +1,184 @@
+-------------------------------------------------------------------
+Mon Jun 11 02:48:27 UTC 2012 - meissner@suse.com
+
+- fixed heap overflow in READLINE output mode (bnc#759859 / CVE-2012-0219)
+ socat-1.7.2.1.patch
+
+-------------------------------------------------------------------
+Mon Aug 2 08:31:55 UTC 2010 - pascal.bleser@opensuse.org
+
+- update to 1.7.3:
+ * a stack overflow vulnerability has been fixed that could be triggered when command line arguments were longer than 512 bytes
+
+-------------------------------------------------------------------
+Mon Jan 11 08:24:32 UTC 2010 - pascal.bleser@opensuse.org
+
+- upgraded to 1.7.1.2:
+ + fixes OpenSSL "nonblock" failure
+ + fixes 64-bit issues and some minor bugs
+
+- changes from 1.7.1.1:
+ + fixes a couple of bugs, some of which could crash socat under some
+ circumstances
+
+- changes from 1.7.1.0:
+ + provides a few new address options to better control its closing behavior
+
+- changes from 1.7.0.1:
+ * fixes a possible SIGSEGV in listening addresses
+ * fixes client connections with option connect-timeout failed when the
+ connections succeeded
+ * fixes the option end-close "did not apply" to some addresses
+ * half close of EXEC and SYSTEM addresses might have failed for pipes and
+ socketpair
+
+-------------------------------------------------------------------
+Thu Oct 16 09:56:41 CEST 2008 - meissner@suse.de
+
+- upgraded to 1.7.0.0
+ - support for SCTP stream sockets, raw interface, and generic sockets.
+ - A new option escape allows it to interrupt raw terminal connections.
+ - Listening and receiving sockets can set a couple of environment variables.
+ - Base control of System V STREAMS has been added.
+ - Many corrections were performed.
+
+-------------------------------------------------------------------
+Mon Feb 11 10:24:33 CET 2008 - lmuelle@suse.de
+
+- Update to version 1.6.0.1.
+ + exec:...,pty did not kill child process under some circumstances; fixed
+ by correcting typo in xio-progcall.c
+ + service name resolution failed due to byte order mistake
+ + socat would hang when invoked with many file descriptors already opened
+ fix: replaced FOPEN_MAX with FD_SETSIZE
+ + fixed bugs where sub processes would become zombies because the master
+ process did not catch SIGCHLD. this affected addresses UDP-LISTEN,
+ UDP-CONNECT, TCP-CONNECT, OPENSSL, PROXY, UNIX-CONNECT, UNIX-CLIENT,
+ ABSTRACT-CONNECT, ABSTRACT-CLIENT, SOCKSA, SOCKS4A
+ + fixed a bug where sub processes would become zombies because the master
+ process caught SIGCHLD but did not wait(). this affected addresses
+ UDP-RECVFROM, IP-RECVFROM, UNIX-RECVFROM, ABSTRACT-RECVFROM
+ + corrected option handling with STDIO; usecase: cool-write
+ + configure --disable-pty also disabled option waitlock
+ + fixed small bugs on systems with struct ip_mreq without struct ip_mreqn
+- Update to version 1.6.0.0.
+ + new addresses IP-DATAGRAM and UDP-DATAGRAM allow versatile broadcast
+ and multicast modes
+ + new option ip-add-membership for control of multicast group membership
+ + new address TUN for generation of Linux TUN/TAP pseudo network
+ interfaces (suggested by Mat Caughron); associated options tun-device,
+ tun-name, tun-type; iff-up, iff-promisc, iff-noarp, iff-no-pi etc.
+ + new addresses ABSTRACT-CONNECT, ABSTRACT-LISTEN, ABSTRACT-SENDTO,
+ ABSTRACT-RECV, and ABSTRACT-RECVFROM for abstract UNIX domain addresses
+ on Linux (requested by Zeeshan Ali); option unix-tightsocklen controls
+ socklen parameter on system calls.
+ + option end-close for control of connection closing allows FD sharing
+ by sub processes
+ + range option supports form address:mask with IPv4
+ + changed behaviour of SSL-LISTEN to require and verify client
+ certificate per default
+ + options f-setlkw-rd, f-setlkw-wr, f-setlk-rd, f-setlk-wr allow finer
+ grained locking on regular files
+ + fixed bug where only first tcpwrap option was applied; fixed bug where
+ tcpwrap IPv6 check always failed
+ and fixing this bug)
+ + filan (and socat -D) could hang when a socket was involved
+ + corrected PTYs on HP-UX (and maybe others) using STREAMS
+ + correct bind with udp6-listen
+ + corrected filan.c peekbuff[0] which did not compile with Sun Studio Pro
+ + corrected problem with read data buffered in OpenSSL layer
+ + corrected problem with option readbytes when input stream stayed idle
+ after so many bytes
+ + fixed a bug where a datagram receiver with option fork could fork two
+ sub processes per packet
+- Don't call test.sh as it doesn't pass if called as non root.
+- Don't remove the buildroot in the install section.
+- Remove patch as linux/fs.h is included if HAVE_LINUX_FS_H is available.
+
+-------------------------------------------------------------------
+Thu Mar 22 10:18:31 CET 2007 - ssommer@suse.de
+
+- fix build with newer kernel headers:
+ some common FS-specific ioctls moved to linux/fs.h
+
+-------------------------------------------------------------------
+Mon Jul 17 12:43:39 CEST 2006 - lmuelle@suse.de
+
+- Update to version 1.5.0.0.
+ + new datagram modes for udp, rawip, unix domain sockets
+ + socat option -T specifies inactivity timeout
+ + rewrote lexical analysis to allow nested socat calls
+ + addresses tcp, udp, tcp-l, udp-l, and rawip now support IPv4 and IPv6
+ + socat options -4, -6 and environment variables SOCAT_DEFAULT_LISTEN_IP,
+ SOCAT_PREFERRED_RESOLVE_IP for control of protocol selection
+ + addresses ssl, ssl-l, socks, proxy now support IPv4 and IPv6
+ + option protocol-family (pf), esp. for openssl-listen
+ + range option supports IPv6 - syntax: range=[::1/128]
+ + option ipv6-v6only (ipv6only)
+ + new tcp-wrappers options allow-table, deny-table, tcpwrap-etc
+ + FIPS version of OpenSSL can be integrated - initial patch provided by
+ David Acker. See README.FIPS
+ + support for resolver options res-debug, aaonly, usevc, primary, igntc,
+ recurse, defnames, stayopen, dnsrch
+ + options for file attributes on advanced filesystems (ext2, ext3,
+ reiser): secrm, unrm, compr, ext2-sync, immutable, ext2-append, nodump,
+ ext2-noatime, journal-data etc.
+ + option cool-write controls severeness of write failure (EPIPE,
+ ECONNRESET)
+ + option o-noatime
+ + socat option -lh for hostname in log output
+ + traffic dumping provides packet headers
+ + configure.in became part of distribution
+ + socats unpack directory now has full version, e.g. socat-1.5.0.0/
+ + corrected docu of option verify
+
+-------------------------------------------------------------------
+Wed Jan 25 21:41:44 CET 2006 - mls@suse.de
+
+- converted neededforbuild to BuildRequires
+
+-------------------------------------------------------------------
+Tue Apr 26 15:20:20 CEST 2005 - uli@suse.de
+
+- disabled test on ARM (hangs QEMU)
+
+-------------------------------------------------------------------
+Sun Mar 20 20:14:32 CET 2005 - lmuelle@suse.de
+
+- Update to version 1.4.2.0.
+
+-------------------------------------------------------------------
+Sun Dec 12 15:51:50 CET 2004 - lmuelle@suse.de
+
+- Update to version 1.4.1.0.
+
+-------------------------------------------------------------------
+Tue Oct 26 23:18:18 CEST 2004 - lmuelle@suse.de
+
+- Update to version 1.4.0.3.
+
+-------------------------------------------------------------------
+Mon Sep 27 00:26:39 CEST 2004 - lmuelle@suse.de
+
+- Update to version 1.4.0.2.
+
+-------------------------------------------------------------------
+Sat Aug 28 15:33:21 CEST 2004 - lmuelle@suse.de
+
+- Add readline.sh to the examples.
+
+-------------------------------------------------------------------
+Fri Aug 27 16:25:49 CEST 2004 - lmuelle@suse.de
+
+- Update to version 1.4.0.1.
+
+-------------------------------------------------------------------
+Mon Jun 14 15:21:13 CEST 2004 - lmuelle@suse.de
+
+- Add openssl-devel, readline-devel, and tcpd-devel to neededforbuild/
+ BuildRequires.
+
+-------------------------------------------------------------------
+Mon Jun 14 12:30:55 CEST 2004 - lmuelle@suse.de
+
+- Inital SuSE RPM based on source tar ball spec file.
New:
----
socat-1.7.1.3.tar.bz2
socat-1.7.2.1.patch
socat.changes
socat.spec
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ socat.spec ++++++
#
# spec file for package socat (Version 1.7.1.3)
#
# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany.
# Copyright (c) 2010 Pascal Bleser