Hello community, here is the log from the commit of package sg3_utils for openSUSE:Factory checked in at 2012-04-23 16:13:25 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/sg3_utils (Old) and /work/SRC/openSUSE:Factory/.sg3_utils.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Package is "sg3_utils", Maintainer is "hare@suse.com" Changes: -------- --- /work/SRC/openSUSE:Factory/sg3_utils/sg3_utils.changes 2011-09-23 12:46:06.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.sg3_utils.new/sg3_utils.changes 2012-04-23 16:13:43.000000000 +0200 @@ -1,0 +2,49 @@ +Sun Apr 22 11:50:44 UTC 2012 - puzel@suse.com + +- Update to version 1.33 + - sg_ses: major rework of indexes (again), now two level + - sg_write_buffer: new --specific option for mode specific + field; new mode 13 (spc4r32) + - sg_vpd: add hp3par volume info vendor VPD page + - fix 'scsi ports' [0x88] page problem + - add 'sinq' pseudo page for standard inquiry response + - add power consumption page + - sg_format: add --poll= option for request sense polling + - improve handling of disks > 2 TB and DIF (protection) + - sg_logs: LB provision lpage extra (sbc3r28) + - sg_modes: application tag mpage subcode 0xf0->0x2 + - sg_write_same: no prot fields when wrprotect=0 + - sg_get_lba_status: reflect change in sbc3r25 to Parameter + Data Length response field (offset reduced from 8 to 4) + - sg_inq, sg_vpd: sync with spc4r33 + - win32: change DataBufferOffset type per MSDN; caused + problem with 64 bit machines (with buffered interface) + - sg_luns: tweak documentation for vendor specific reports + - add man pages for scsi_loging_level, scsi_mandat, + scsi_satl and scsi_temperature + +------------------------------------------------------------------- +Mon Jan 16 19:59:42 UTC 2012 - tabraham@novell.com + +- Update to version 1.32 + + sg_sanitize: new utility for command added in sb3r27 + + sg_sat_identify: add '--ident' to output WWN + + sg_ses: major rework of descriptor output + + add --index, --descriptor, --join, --clear, --get, and --set + options + + sg_raw: exit status corrections + + sg_decode_sense: add --nospace and --hex options + + sg_logs: fix bug with large --maxlen + + zero response length when resid implies it is invalid + + add scope field to lb provisioning lpage (sb3r27) + + sg_inq: sync version descriptors with spc4r31 + + sb_lib_data: sync asc/ascq codes with spc4r31 + + sg_vpd: add LBPRZ field in LP provisioning VPD page + + sg_format: allow format of pdt 7 (some MO drives) + + sg_cmd_basic: sg_cmds_process_resp() handle status good + with a sense key other than no_sense (e.g. completed) + + add README.iscsi + +- Updated rescan-scsi-bus.sh to v1.56 + +------------------------------------------------------------------- Old: ---- sg3_utils-1.31.tar.bz2 New: ---- sg3_utils-1.33.tgz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ sg3_utils.spec ++++++ --- /var/tmp/diff_new_pack.9Rm1tb/_old 2012-04-23 16:13:46.000000000 +0200 +++ /var/tmp/diff_new_pack.9Rm1tb/_new 2012-04-23 16:13:46.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package sg3_utils # -# Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -16,22 +16,20 @@ # -Url: http://sg.torque.net/sg/sg3_utils.html +Url: http://sg.danny.cz/sg/sg3_utils.html Name: sg3_utils -%define sgver 1.31 +Version: 1.33 +Release: 0 +Summary: A collection of tools that send SCSI commands to devices License: BSD-3-Clause ; GPL-2.0 ; GPL-2.0+ Group: Hardware/Other -Provides: sg_utils +Source: http://sg.danny.cz/sg/p/sg3_utils-%{version}.tgz +Source2: http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh +Requires(pre): %insserv_prereq Provides: scsi +Provides: sg_utils Obsoletes: scsi <= 1.7_2.38_1.25_0.19_1.02_0.93 -AutoReqProv: on -PreReq: %insserv_prereq -Version: 1.31 -Release: 1 -Summary: A collection of tools that send SCSI commands to devices -Source: http://sg.torque.net/sg/p/sg3_utils-%{sgver}.tar.bz2 -Source2: http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh BuildRoot: %{_tmppath}/%{name}-%{version}-build %description @@ -43,11 +41,10 @@ or a bridge device are examples of devices that use SCSI command sets. %package devel -License: BSD-3-Clause ; GPL-2.0+ Summary: A collection of tools that send SCSI commands to devices +License: BSD-3-Clause ; GPL-2.0+ Group: Development/Libraries/C and C++ -AutoReqProv: on -Requires: %name = %version +Requires: %{name} = %{version} %description devel The sg3_utils package contains utilities that send SCSI commands to @@ -88,7 +85,7 @@ %attr(755,root,root) %{_bindir}/sg_map %attr(755,root,root) %{_bindir}/sg_turs %attr(755,root,root) %{_bindir}/sg_test_rwbuf -#%attr(755,root,root) %{_bindir}/scsi_devfs_scan +#%%attr(755,root,root) %%{_bindir}/scsi_devfs_scan %attr(755,root,root) %{_bindir}/sgm_dd %attr(755,root,root) %{_bindir}/sg_read %attr(755,root,root) %{_bindir}/sg_logs @@ -133,6 +130,7 @@ %attr(755,root,root) %{_bindir}/sg_write_same %attr(755,root,root) %{_bindir}/sg_decode_sense %attr(755,root,root) %{_bindir}/sg_referrals +%attr(755,root,root) %{_bindir}/sg_sanitize %doc %{_mandir}/man8/sg_dd.8.gz %doc %{_mandir}/man8/sgp_dd.8.gz %doc %{_mandir}/man8/sgm_dd.8.gz @@ -145,7 +143,7 @@ %doc %{_mandir}/man8/sg_turs.8.gz %doc %{_mandir}/man8/sg_inq.8.gz %doc %{_mandir}/man8/sg_test_rwbuf.8.gz -#%doc %{_mandir}/man8/scsi_devfs_scan.8.gz +#%%doc %%{_mandir}/man8/scsi_devfs_scan.8.gz %doc %{_mandir}/man8/sg_start.8.gz %doc %{_mandir}/man8/sg_reset.8.gz %doc %{_mandir}/man8/sg_modes.8.gz @@ -191,24 +189,29 @@ %doc %{_mandir}/man8/sg_write_same.8.gz %doc %{_mandir}/man8/sg_decode_sense.8.gz %doc %{_mandir}/man8/sg_referrals.8.gz +%doc %{_mandir}/man8/sg_sanitize.8.gz +%doc %{_mandir}/man8/scsi_logging_level.8.gz +%doc %{_mandir}/man8/scsi_mandat.8.gz +%doc %{_mandir}/man8/scsi_satl.8.gz +%doc %{_mandir}/man8/scsi_temperature.8.gz %attr(755,root,root) %{_libdir}/libsgutils2.so.* %files devel %defattr(644,root,root) %attr(755,root,root) %{_libdir}/libsgutils2.so %attr(755,root,root) %dir %{_prefix}/include/scsi -%{_prefix}/include/scsi/sg_cmds.h -%{_prefix}/include/scsi/sg_cmds_basic.h -%{_prefix}/include/scsi/sg_cmds_extra.h -%{_prefix}/include/scsi/sg_lib.h -%{_prefix}/include/scsi/sg_pt.h -%{_prefix}/include/scsi/sg_io_linux.h -%{_prefix}/include/scsi/sg_linux_inc.h -%{_prefix}/include/scsi/sg_cmds_mmc.h -%{_prefix}/include/scsi/sg_lib_data.h +%{_includedir}/scsi/sg_cmds.h +%{_includedir}/scsi/sg_cmds_basic.h +%{_includedir}/scsi/sg_cmds_extra.h +%{_includedir}/scsi/sg_lib.h +%{_includedir}/scsi/sg_pt.h +%{_includedir}/scsi/sg_io_linux.h +%{_includedir}/scsi/sg_linux_inc.h +%{_includedir}/scsi/sg_cmds_mmc.h +%{_includedir}/scsi/sg_lib_data.h %clean test ! -z "$RPM_BUILD_ROOT" -a "$RPM_BUILD_ROOT" != "/" && rm -rf $RPM_BUILD_ROOT -rm -rf $RPM_BUILD_DIR/sg3_utils-%{sgver} +rm -rf $RPM_BUILD_DIR/sg3_utils-%{version} %changelog ++++++ rescan-scsi-bus.sh ++++++ ++++ 743 lines (skipped) ++++ between /work/SRC/openSUSE:Factory/sg3_utils/rescan-scsi-bus.sh ++++ and /work/SRC/openSUSE:Factory/.sg3_utils.new/rescan-scsi-bus.sh -- To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-commit+help@opensuse.org