Hello community,
here is the log from the commit of package makedumpfile for openSUSE:Factory checked in at 2011-11-10 15:50:51
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/makedumpfile (Old)
and /work/SRC/openSUSE:Factory/.makedumpfile.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "makedumpfile", Maintainer is "PTesarik@suse.com"
Changes:
--------
--- /work/SRC/openSUSE:Factory/makedumpfile/makedumpfile.changes 2011-09-23 02:12:36.000000000 +0200
+++ /work/SRC/openSUSE:Factory/.makedumpfile.new/makedumpfile.changes 2011-11-10 15:50:54.000000000 +0100
@@ -1,0 +2,31 @@
+Wed Nov 9 17:31:50 UTC 2011 - ptesarik@suse.cz
+
+- README.static: Explain why static linking of some libraries is
+ preferred.
+
+-------------------------------------------------------------------
+Thu Nov 3 07:48:12 UTC 2011 - cfarrell@suse.com
+
+- license update: GPL-2.0
+ SPDX format (http://www.spdx.org/licenses)
+
+-------------------------------------------------------------------
+Wed Nov 2 22:03:33 UTC 2011 - ptesarik@suse.cz
+
+- Fix build on older distros.
+
+-------------------------------------------------------------------
+Mon Oct 31 07:28:59 UTC 2011 - ptesarik@suse.cz
+
+- fix the specfile License tag: since ppc64.c and s390x.c are
+ licensed under GPL-2.0 only, the whole package cannot be GPL-2.0
+ or later (bnc#727022).
+
+-------------------------------------------------------------------
+Thu Oct 27 05:15:53 UTC 2011 - ptesarik@suse.cz
+
+- upgrade to makedumpfile-1.4.0.
+- makedumpfile-supports-3.0.patch: Mark all kernel 3.0 releases
+ as supported.
+
+-------------------------------------------------------------------
Old:
----
makedumpfile-1.3.6.tar.bz2
New:
----
README.static
makedumpfile-1.4.0.tar.bz2
makedumpfile-supports-3.0.patch
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ makedumpfile.spec ++++++
--- /var/tmp/diff_new_pack.aFMhRJ/_old 2011-11-10 15:50:55.000000000 +0100
+++ /var/tmp/diff_new_pack.aFMhRJ/_new 2011-11-10 15:50:55.000000000 +0100
@@ -1,7 +1,7 @@
#
-# spec file for package makedumpfile (Version 1.3.6)
+# spec file for package makedumpfile
#
-# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2011 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -19,22 +19,22 @@
Name: makedumpfile
-BuildRequires: zlib-devel
-%if 0%{?suse_version} > 1100
-BuildRequires: libdw-devel
-%else
-BuildRequires: libdw-devel libdw1 libelf-devel libelf0 libelf1
+BuildRequires: libdw-devel libebl-devel libelf-devel zlib-devel
+%if 0%{?suse_version} >= 1140 || 0%{?sles_version} >= 11
+BuildRequires: libbz2-devel lzma-devel
%endif
-License: GPLv2+
-Version: 1.3.6
+License: GPL-2.0
+Version: 1.4.0
Release: 1
Summary: Partial kernel dump
Group: System/Kernel
Url: https://sourceforge.net/projects/makedumpfile/
Source: %{name}-%{version}.tar.bz2
+Source1: README.static
Patch0: %{name}-coptflags.diff
+Patch1: %{name}-supports-3.0.patch
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-ExclusiveArch: %ix86 x86_64 ia64 ppc64
+ExclusiveArch: %ix86 x86_64 ia64 ppc64 s390x %arm
%description
makedumpfile is a dump program to shorten the size of dump file. It
@@ -51,8 +51,26 @@
%prep
%setup -q
%patch0 -p1
+%patch1 -p1
%build
+LIBS_STATIC=
+LIBS_DYNAMIC=
+if nm -u -f posix %{_libdir}/libdw.a | grep '^BZ2_bzDecompress U'; then
+ if [ -e %{_libdir}/libbz2.a ]; then
+ LIBS_STATIC="$LIBS_STATIC -lbz2"
+ else
+ LIBS_DYNAMIC="$LIBS_DYNAMIC -lbz2"
+ fi
+fi
+if nm -u -f posix %{_libdir}/libdw.a | grep '^lzma_code U'; then
+ if [ -e %{_libdir}/liblzma.a ]; then
+ LIBS_STATIC="$LIBS_STATIC -llzma"
+ else
+ LIBS_DYNAMIC="$LIBS_DYNAMIC -llzma"
+ fi
+fi
+export LIBS_STATIC LIBS_DYNAMIC
make COPTFLAGS="$RPM_OPT_FLAGS"
%install
++++++ README.static ++++++
Q: Why is makedumpfile linked statically?
A: To save space.
Loner answer follows.
The secondary kernel runs in a very constrained environment. It cannot use
the whole RAM of the machine, simply because this is the data that should
be saved. Instead, it uses a special portion of RAM that is reserved for
that purpose in the primary kernel. Since this is memory that cannot be
used by the primary kernel (it is basically dead unless there is a kernel
crash, which should be a rare event), it is desirable to keep the size of
the reserved memory as small as possible.
One thing that takes up RAM in the secondary kernel is the root file
system. Now, the makedumpfile binary is also run from this filesystem.
Consequently, initrd must also include all the dynamic libraries that
this binary links against. This can increase the size of the initrd
considerably.
However, we don't need most of that space, because makedumpfile uses only
a fraction of all the code present in the dynamic libraries. In fact, when
makedumpfile is the only user of those libraries in the secondary kernel
environment, the other usual term for these libraries, "shared libraries",
no longer matches reality. It is not shared with anything else in the
system. On the other hand, some libraries are also used by other binaries
in the initrd, so it makes sense to link to them dynamically.
The following libraries are shared with other tools:
libdl
libz
The following libraries are only used by makedumpfile, and thus should be
linked statically:
libdw
libebl
libelf
libbz2
liblzma
Static versions of some of the above libraries may not be available in the
distro, so a build-time check is performed, and they fall back to linking
dynamically if necessary.
++++++ makedumpfile-1.3.6.tar.bz2 -> makedumpfile-1.4.0.tar.bz2 ++++++
++++ 12559 lines of diff (skipped)
++++++ makedumpfile-coptflags.diff ++++++
--- /var/tmp/diff_new_pack.aFMhRJ/_old 2011-11-10 15:50:55.000000000 +0100
+++ /var/tmp/diff_new_pack.aFMhRJ/_new 2011-11-10 15:50:55.000000000 +0100
@@ -1,11 +1,11 @@
---
- Makefile | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
+ Makefile | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
--- a/Makefile
+++ b/Makefile
-@@ -4,10 +4,10 @@ VERSION=1.3.5
- DATE=25 June 2010
+@@ -4,10 +4,10 @@ VERSION=1.4.0
+ DATE=12 September 2011
CC = gcc
-CFLAGS = -g -O2 -Wall -D_FILE_OFFSET_BITS=64 \
@@ -15,14 +15,14 @@
-CFLAGS_ARCH = -g -O2 -Wall -D_FILE_OFFSET_BITS=64 \
+CFLAGS_ARCH = $(COPTFLAGS) -g -O2 -Wall -D_FILE_OFFSET_BITS=64 \
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
+ # LDFLAGS = -L/usr/local/lib -I/usr/local/include
- ARCH := $(shell uname -m | sed -e s/i.86/x86/ -e s/sun4u/sparc64/ \
-@@ -32,7 +32,7 @@ $(OBJ_ARCH): $(SRC_ARCH)
+@@ -38,7 +38,7 @@ $(OBJ_ARCH): $(SRC_ARCH)
$(CC) $(CFLAGS_ARCH) -c -o ./$@ ./$(@:.o=.c)
- makedumpfile: $(SRC) $(OBJ_ARCH)
-- $(CC) $(CFLAGS) $(OBJ_ARCH) -o $@ $< -static -ldw -lelf -lz
-+ $(CC) $(CFLAGS) $(OBJ_ARCH) -o $@ $< -Wl,-Bstatic -ldw -lelf -Wl,-Bdynamic -lz
+ makedumpfile: $(SRC) $(OBJ_PART) $(OBJ_ARCH)
+- $(CC) $(CFLAGS) $(LDFLAGS) $(OBJ_PART) $(OBJ_ARCH) -o $@ $< -static -ldw -lbz2 -lebl -ldl -lelf -lz
++ $(CC) $(CFLAGS) $(LDFLAGS) $(OBJ_PART) $(OBJ_ARCH) -o $@ $< -Wl,-Bstatic -ldw -lebl -lelf $(LIBS_STATIC) -Wl,-Bdynamic -ldl -lz $(LIBS_DYNAMIC)
echo .TH MAKEDUMPFILE 8 \"$(DATE)\" \"makedumpfile v$(VERSION)\" \"Linux System Administrator\'s Manual\" > temp.8
grep -v "^.TH MAKEDUMPFILE 8" makedumpfile.8 >> temp.8
mv temp.8 makedumpfile.8
++++++ makedumpfile-supports-3.0.patch ++++++
From: Petr Tesarik