Mailinglist Archive: opensuse-commit (1855 mails)

[root@xxxxxxxxxxxxxxx (h_root)]

Hello community,

here is the log from the commit of package sysconfig for openSUSE:Factory
checked in at Tue Sep 6 14:49:10 CEST 2011.



--------
--- sysconfig/sysconfig.changes 2011-08-29 12:04:04.000000000 +0200
+++ /mounts/work_src_done/STABLE/sysconfig/sysconfig.changes    2011-09-05 
15:52:45.000000000 +0200
@@ -0,0 +1,18 @@
+------------------------------------------------------------------
+Mon Sep  5 09:07:58 UTC 2011 - mt@xxxxxxxx
+
+- version 0.75.1
+- Warn and ask the user to report a bug when the ifcfg defines the
+  INTERFACETYPE variable to override behaviour of ifup: There is a
+  bug in ifup when it is required to define it (bnc#711762).
+  Improved also variable description in ifcfg.5 manual page.
+- Added missed dhcp4,dhcp6,ibft,none BOOTPROTO values to
+  ifcfg.template (bnc#701000).
+- Added WIRELESS_AUTH_MODE='no-encryption' option handling to
+  ifup-wireless, because YaST sets it (bnc#648830).
+- Fixed get_depending_ifaces to not return bonding slaves by
+  default as it is not required to stop the slaves before the
+  bonding master goes down and in fact it may cause a system
+  hang, when the slaves are infiniband child interfaces, that
+  are deleted while ifdown (bnc#698478).
+

calling whatdependson for head-i586


Old:
----
  disable-NM-under-systemd.patch
  netconfig-dns-ranking-vpnc.patch
  sysconfig-0.75.0.tar.bz2
  wireless-power-settings.patch

New:
----
  sysconfig-0.75.1.tar.bz2

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ sysconfig.spec ++++++
--- /var/tmp/diff_new_pack.hVkBPr/_old  2011-09-06 14:43:46.000000000 +0200
+++ /var/tmp/diff_new_pack.hVkBPr/_new  2011-09-06 14:43:46.000000000 +0200
@@ -19,9 +19,9 @@
 
 
 Name:           sysconfig
-Version:        0.75.0
-Release:        11
-Summary:        The system configuration scheme
+Version:        0.75.1
+Release:        1
+Summary:        The sysconfig scheme and traditional network scripts
 Url:            http://gitorious.org/opensuse/sysconfig
 Group:          System/Base
 License:        GPLv2+
@@ -32,9 +32,6 @@
 Requires:       iproute2 dbus-1 procps
 BuildRoot:      %{_tmppath}/%{name}-%{version}-build
 Source:         %name-%version.tar.bz2
-Patch0:         disable-NM-under-systemd.patch
-Patch1:         wireless-power-settings.patch
-Patch2:         netconfig-dns-ranking-vpnc.patch
 
 %description
 This package provides the SuSE system configuration scheme and
@@ -54,9 +51,6 @@
 
 %prep
 %setup -n sysconfig-%{version}
-%patch0 -p1
-%patch1 -p1
-%patch2 -p1
 
 %build
 autoreconf --force --install

++++++ sysconfig-0.75.0.tar.bz2 -> sysconfig-0.75.1.tar.bz2 ++++++
++++ 2951 lines of diff (skipped)
++++    retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/ChangeLog new/sysconfig-0.75.1/ChangeLog
--- old/sysconfig-0.75.0/ChangeLog      2011-03-15 18:42:19.000000000 +0100
+++ new/sysconfig-0.75.1/ChangeLog      2011-09-05 15:51:20.000000000 +0200
@@ -1,4 +1,161 @@
-commit d49703aa84e0fa788cada73abb0e93ba2a9bcab0 (HEAD, master)
+commit 42adafa3d1e6a30f9278470c2f66d966782a662f (HEAD, origin/master, test, 
master)
+Author: Marius Tomaschewski <mt@xxxxxxxx>
+Date:   Mon Sep 5 15:46:58 2011 +0200
+
+    version 0.75.1, updated changes file
+
+commit cbd772566a74b3bb9f2199d9716c021a103a4d9e
+Author: Frederic Crozat <fcrozat@xxxxxxxx>
+Date:   Mon Aug 29 10:03:13 2011 +0000
+
+    Fixed incorrect systemd detection
+
+commit 640d8ec1a1bfeae7a8a3c26c65c5a5c2647c1f7b (master-test)
+Author: Cristian Rodríguez <crrodriguez@xxxxxxxxxxxx>
+Date:   Wed Aug 10 03:05:20 2011 +0000
+
+    Do not use -fno-strict-aliasing when not needed
+
+commit da3529de3ab702f89399d374fc5c264bc33e021a
+Author: Marius Tomaschewski <mt@xxxxxxxx>
+Date:   Fri Aug 26 22:02:59 2011 +0000
+
+    Added vpnc to DNS ranking as preferred service
+
+commit e2777a2da17fd8a53e70e050f21b7a9143281085
+Author: Frederic Crozat <fcrozat@xxxxxxxx>
+Date:   Fri Aug 12 16:03:48 2011 +0200
+
+    Do not handle NetworkManager if running under systemd.
+    
+    NetworkManager should be using its own .service when used under
+    systemd.
+
+commit d68d274585064a892d1dbe042c42737ef36f1ae9
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Thu Aug 11 14:11:52 2011 +0200
+
+    Show warning when ifcfg file defines INTERFACETYPE
+    
+    Warn and ask the user to report a bug when the ifcfg defines
+    the INTERFACETYPE to override behaviour of ifup: There is a
+    bug in ifup when it is required to define it (bnc#711762).
+    Improved also variable description in ifcfg.5 manual page.
+
+commit 9ae8db79d5613aa7458f88451da29f7c39365b7c
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Thu Jun 9 09:50:20 2011 +0200
+
+    Use summary as in pdb
+
+commit abaca4f91d6b6e10c5d47c30ff866ae452d210d4
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Tue Jun 7 17:18:59 2011 +0200
+
+    Do not return bonding slaves in get_depending_ifaces
+    
+    Fixed get_depending_ifaces to not return bonding slaves by
+    default as it is not required to stop the slaves before the
+    bonding master goes down and in fact it may cause a system
+    hang, when the slaves are infiniband child interfaces, that
+    are deleted while ifdown (bnc#698478).
+
+commit fd3f9c52cfe68091e81d307980e30e2abedb3e5e (export/master)
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Mon Jun 27 10:05:07 2011 +0200
+
+    Added ibft,node to the meta list, not only comment
+
+commit ea6e6c62fdba32ff0f1157f50deb1f710df70e58 (backup/master)
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Mon Jun 27 09:39:49 2011 +0200
+
+    Added ibft,none to BOOTPROTO in ifcfg.template
+    
+    Added also ibft,none to yast2 meta tag value list of the BOOTPROTO
+    variable in /etc/sysconfig/network/ifcfg.template (bnc#701000).
+
+commit dd2cdefd213933b644009681fb9c035dedcfee52
+Author: Michal Kubeček <mkubecek@xxxxxxxxxx>
+Date:   Mon Jun 20 15:52:12 2011 +0000
+
+    Added dhcp4,dhcp6 to BOOTPROTO in ifcfg.template
+    
+    Added dhcp4,dhcp6 to yast2 meta tag value list of the BOOTPROTO
+    variable in /etc/sysconfig/network/ifcfg.template (bnc#701000).
+
+commit b54c65525c0577b87f2ed8f3343e5993655d5a5d
+Author: Vladimir Botka <vbotka@xxxxxxx>
+Date:   Wed Jun 8 22:00:08 2011 +0200
+
+    no-encryption option added to the WIRELESS_AUTH_MODE
+    
+    (bnc#213001) introduced no-encryption option in Yast, but this option has
+    never been implemented in the sysconfig. The differnece between 
no-encryption
+    and open is that open system can use user authentication. In both cases
+    key_mgmt=NONE option shall be put into the wpa_supplicant.conf 
(bnc#648830).
+    
+    Signed-off-by: Marius Tomaschewski <mt@xxxxxxx>
+
+commit 7e68aac4fba2270a3d08ab991bbd5de5b6ade0d3
+Author: Ludwig Nussel <ludwig.nussel@xxxxxxx>
+Date:   Tue May 31 17:14:43 2011 +0200
+
+    remove /var/lock/subsys references
+    
+    Signed-off-by: Marius Tomaschewski <mt@xxxxxxx>
+
+commit ffc50234f05b556c0050f9dcd3ce52840921e1d1
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Fri May 20 22:54:39 2011 +0200
+
+    Removed 127.0.0.2 workaround from ifcfg-lo
+    
+    Dropped address used by WRITE_HOSTNAME_TO_HOSTS (fate#308824).
+
+commit 9beeb884d295eb101175b11591a5459a46aad124
+Author: Ludwig Nussel <ludwig.nussel@xxxxxxx>
+Date:   Fri May 20 14:37:11 2011 +0200
+
+    change WRITE_HOSTNAME_TO_HOSTS to "no" (fate#308824)
+
+commit 9c43872a6dd80f1a5a1b39cdb10b600f627dc913
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Thu May 12 09:49:43 2011 +0200
+
+    Apply wireless power settings when requested
+    
+    Fixed to apply wireless power settings and allow any setting as
+    defined in the iwconfig(8) manual page (fate#309255).
+
+commit e8651abcec16c48cded3e25b088249b5fe15711d
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Tue May 3 10:42:18 2011 +0200
+
+    Fixed ifsysctl examples to use use_tempaddr = 2
+    
+    Fixed example to use use_tempaddr = 2 (enable Privacy Extensions
+    and prefer temporary addresses over public addresses) instead of
+    use_tempaddr = 1 (enable Privacy Extensions, but prefer public
+    addresses over temporary addresses), so it causes the expected
+    effects (bnc#664550).
+
+commit 536459aa5d42a10ff4069b291cf94e70cdd44e1a
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Mon Apr 18 14:17:13 2011 +0000
+
+    Improved bonding slave documentation
+
+commit 72e650470608229be41fd30e39e56acb9eafbd53
+Author: Marius Tomaschewski <mt@xxxxxxx>
+Date:   Mon Mar 28 12:23:10 2011 +0200
+
+    netconfig/dns: ignore forwarders matching own IPs
+    
+    Filter out all misconfigured dns forwarder IPs, that match an
+    own IP as they would cause a loop (bnc#676676).
+
+commit d49703aa84e0fa788cada73abb0e93ba2a9bcab0
 Author: Marius Tomaschewski <mt@xxxxxxx>
 Date:   Tue Mar 15 18:41:42 2011 +0100
 
@@ -46,7 +203,7 @@
 
     ifservices: updated obsolete eth-id example.
 
-commit 2a14007b7ff5dd3cfe056c53f29f1e06ca4e5de2 (origin/opensuse-11.4, 
origin/master, export/opensuse-11.4, export/master, opensuse-11.4)
+commit 2a14007b7ff5dd3cfe056c53f29f1e06ca4e5de2 (tag: opensuse-11.4-release)
 Author: Marius Tomaschewski <mt@xxxxxxx>
 Date:   Mon Feb 14 14:58:48 2011 +0100
 
@@ -62,7 +219,7 @@
     become world readable while installation because of a fillup
     run; changed to explicitly set 0600 permissions (bnc#670871).
 
-commit 2d2bd368534b2fa0d5507101631d6a56368e296b
+commit 2d2bd368534b2fa0d5507101631d6a56368e296b (tag: version-0.74.5)
 Author: Marius Tomaschewski <mt@xxxxxxx>
 Date:   Tue Jan 25 09:57:13 2011 +0100
 
@@ -93,7 +250,7 @@
 
     Fixed typo in doc/ifcfg.5, IPv4 autoip, not IPv6
 
-commit 5f27fe28321497c64358e2e052e36f40952d56a9
+commit 5f27fe28321497c64358e2e052e36f40952d56a9 (tag: version-0.74.4)
 Author: Marius Tomaschewski <mt@xxxxxxx>
 Date:   Fri Jan 7 17:32:27 2011 +0100
 
@@ -123,7 +280,7 @@
     Fixed ifup-bonding to not fail on enslave errors, but at
     the end, when there are no slaves in the bond (bnc#660774).
 
-commit e38938065e356e5b96ee42ea616c1796037fd89b
+commit e38938065e356e5b96ee42ea616c1796037fd89b (tag: version-0.74.3)
 Author: Marius Tomaschewski <mt@xxxxxxx>
 Date:   Wed Jan 5 16:58:56 2011 +0100
 
@@ -181,7 +338,7 @@
     Fixed link_wait scriptname check and ping usage (bnc#644738);
     improved to allow the user to specify the steps.
 
-commit 7cda3f6f76b177f2cbc3aa91e84fffbba2508ffa
+commit 7cda3f6f76b177f2cbc3aa91e84fffbba2508ffa (tag: version-0.74.2)
 Author: Marius Tomaschewski <mt@xxxxxxx>
 Date:   Thu Nov 11 14:42:03 2010 +0100
 
@@ -224,7 +381,7 @@
 
     require wpa_supplicant if a wpa_supplicant config is specified
 
-commit 17537e86e6671419a3d059d788673940cac64451 (test)
+commit 17537e86e6671419a3d059d788673940cac64451
 Author: Marius Tomaschewski <mt@xxxxxxx>
 Date:   Wed Oct 6 11:43:57 2010 +0200
 
@@ -912,7 +1069,7 @@
     
     git-svn-id: https://svn.suse.de/svn/sysconfig/trunk@2087 
bf393798-0adf-0310-9952-bd479070b6c1
 
-commit 6c2a678fa6a64ab7210624390294e5acc689009a (netconfig-empty-defaults)
+commit 6c2a678fa6a64ab7210624390294e5acc689009a
 Author: mt <mt@bf393798-0adf-0310-9952-bd479070b6c1>
 Date:   Thu Jan 14 15:03:18 2010 +0000
 
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/VERSION new/sysconfig-0.75.1/VERSION
--- old/sysconfig-0.75.0/VERSION        2011-03-15 18:05:03.000000000 +0100
+++ new/sysconfig-0.75.1/VERSION        2011-09-05 15:47:23.000000000 +0200
@@ -1 +1 @@
-0.75.0
+0.75.1
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/config/ifcfg-lo new/sysconfig-0.75.1/config/ifcfg-lo
--- old/sysconfig-0.75.0/config/ifcfg-lo        2011-03-15 17:49:47.000000000 
+0100
+++ new/sysconfig-0.75.1/config/ifcfg-lo        2011-09-05 14:21:22.000000000 
+0200
@@ -3,7 +3,6 @@
 NETMASK=255.0.0.0
 NETWORK=127.0.0.0
 BROADCAST=127.255.255.255
-IPADDR_2=127.0.0.2/8
 STARTMODE=auto
 USERCONTROL=no
 FIREWALL=no
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/config/ifcfg.template 
new/sysconfig-0.75.1/config/ifcfg.template
--- old/sysconfig-0.75.0/config/ifcfg.template  2011-03-15 17:49:47.000000000 
+0100
+++ new/sysconfig-0.75.1/config/ifcfg.template  2011-09-05 10:27:48.000000000 
+0200
@@ -39,15 +39,19 @@
 #
 IFPLUGD_PRIORITY=
 
-## Type:    list(static,dhcp,autoip,dhcp+autoip,6to4)
+## Type:    list(static,dhcp,dhcp4,dhcp6,autoip,dhcp+autoip,6to4,ibft,none)
 ## Default: static
 #
 # With BOOTPROTO you can choose in which mode the interface will be set up:
 # - static:      Set up static address(es)
-# - dhcp:        Start a dhcp client on that interface.
+# - dhcp:        Start a dhcp client (IPV4 and IPv6) on that interface.
+# - dhcp4:       Start a dhcp client (IPv4 only) on that interface.
+# - dhcp6:       Start a dhcp client (IPv6 only) on that interface.
 # - autoip:      Automatic search for a free address and assign it statically.
-# - dhcp+autoip: Try dhcp and use autoip if dhcp fails.
+# - dhcp+autoip: Try dhcp4 and use autoip if dhcp fails.
 # - 6to4:        Set up ipv6 over ipv4 tunnel (see man ifcfg-tunnel)
+# - ibft:        Use iSCSI  Boot  Firmware Table (iBFT)
+# - none:        Do not set up the link or ip, a (bonding) master will do it.
 # If you use dhcp or autoip you may additionally specify static address(es).
 #
 BOOTPROTO=
@@ -612,16 +616,21 @@
 # Ad-Hoc modes when the variable is empty.
 WIRELESS_AP=''
 
-## Type:       string(yes,no,none)
+## Type:       string(yes,no,none,)
 ## Default:    "none"
 #
-# Can be set to yes, no, none (default).
-# If set to none, ifup will not manipulate power saving for this device.
-# If set to no, ifup tries to disable power saving for this device.
-# If set to yes, ifup tries to enable power saving for this device. This
-# is not supported by all cards resp. drivers and shall be tested before
-# the user decides to set it.
-WIRELESS_POWER='none'
+# Used to manipulate power management scheme parameters and mode.
+# Can be set to 'yes', 'no', 'none' or '' (default) or to any setting that
+# is defined in iwconfig(8) manual page as value for the power option.
+#
+# If set to "" or "none", ifup will not manipulate power saving for this 
device.
+# If set to "no", ifup tries to disable the power saving for this device.
+# If set to "yes", ifup tries to enable power saving for this device.
+# Other settings are passed directly to the iwconfig power command.
+#
+# Note, that this setting is not supported by all cards resp. drivers
+# and shall be tested before the user decides to set it.
+WIRELESS_POWER=''
 
 ## Type:       string
 ## Default:    ""
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/config/sysconfig.dhcp-network 
new/sysconfig-0.75.1/config/sysconfig.dhcp-network
--- old/sysconfig-0.75.0/config/sysconfig.dhcp-network  2011-03-15 
17:49:47.000000000 +0100
+++ new/sysconfig-0.75.1/config/sysconfig.dhcp-network  2011-09-05 
14:21:22.000000000 +0200
@@ -276,7 +276,7 @@
 DHCLIENT_WAIT_AT_BOOT="15"
 
 ## Type:        yesno
-## Default:     yes
+## Default:     no
 ## ServiceRestart: yast2
 #
 # This option is read by YaST during network configuration.
@@ -286,5 +286,5 @@
 # host to be reached), if the real network is not reachable.
 #
 # If unset, YaST will not touch /etc/hosts.
-WRITE_HOSTNAME_TO_HOSTS="yes"
+WRITE_HOSTNAME_TO_HOSTS="no"
 
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/doc/ifcfg-bonding.5 
new/sysconfig-0.75.1/doc/ifcfg-bonding.5
--- old/sysconfig-0.75.0/doc/ifcfg-bonding.5    2010-11-16 13:37:09.000000000 
+0100
+++ new/sysconfig-0.75.1/doc/ifcfg-bonding.5    2011-06-09 17:47:12.000000000 
+0200
@@ -19,6 +19,20 @@
 .TP
 .B BONDING_SLAVE_<X>
 here you specify the interface name representing the slave network interfaces.
+
+\fBNote\fR:
+Please adopt the /etc/udev/rules.d/70-persistent-net.rules rule file to match
+the hardware by BUS id and not by the MAC address (default). Using MAC address,
+it is not possible to replace a defect NIC with a new one (having a different
+MAC), without to adopt either the MAC or the name of the slave interface in the
+configuration files.
+.br
+Note also: Bonding slave interfaces are reserved for the bonding and are not
+usable for any another purposes (unlike e.g. interfaces used for VLANs) and
+the bonding master manages the slaves itself, e.g. it sets the MAC address
+on the slaves. To configure this accordingly, set BOOTPROTO=none in the ifcfg
+file of each slave interfaces to avoids any link-layer or IP setup on these
+interfaces.
 .TP
 .B BONDING_MODULE_OPTS
 contains bonding options. Here you can set interface timeouts or working modes
@@ -47,13 +61,26 @@
    STARTMODE='onboot'
    BOOTPROTO='static'
    IPADDR='192.168.0.1/24'
-
    BONDING_MASTER='yes'
    BONDING_SLAVE_0='eth0'
    BONDING_SLAVE_1='eth1'
    BONDING_MODULE_OPTS='mode=active-backup miimon=100'
 .fi
 
+.I ifcfg-eth0
+.nf
+   STARTMODE='onboot'
+   BOOTPROTO='none'
+   #ETHTOOL_OPTIONS='wol g'
+.fi
+
+.I ifcfg-eth1
+.nf
+   STARTMODE='onboot'
+   BOOTPROTO='none'
+   #ETHTOOL_OPTIONS='wol g'
+.fi
+
 .SH Additional Information
 
 For additional and more general information take a look into
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/doc/ifcfg.5 new/sysconfig-0.75.1/doc/ifcfg.5
--- old/sysconfig-0.75.0/doc/ifcfg.5    2011-03-15 17:56:20.000000000 +0100
+++ new/sysconfig-0.75.1/doc/ifcfg.5    2011-09-05 11:04:30.000000000 +0200
@@ -241,8 +241,11 @@
 .B ip link set up ...
 .TP
 .B INTERFACETYPE
-Sometimes ifup cannot determine the interface type properly. In this cases you
-may specify it in this variable. 
+In case ifup cannot determine the interface type properly, you may
+specify the correct type in this variable to override the behavior
+and force ifup to handle the interface differently than it detected
+from system or config.
+Please always open a bug report when it is required to set the type.
 .TP
 .B ETHTOOL_OPTIONS
 If this variable is not empty ifup will call ethtool with this options.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/doc/ifsysctl.5 new/sysconfig-0.75.1/doc/ifsysctl.5
--- old/sysconfig-0.75.0/doc/ifsysctl.5 2011-03-15 18:02:24.000000000 +0100
+++ new/sysconfig-0.75.1/doc/ifsysctl.5 2011-09-05 14:21:22.000000000 +0200
@@ -14,7 +14,7 @@
 usually interface specific settings, like:
 
 .nf
-       net.ipv6.conf.eth0.use_tempaddr = 1
+       net.ipv6.conf.eth0.use_tempaddr = 2
 or
        net.ipv4.conf.eth0.rp_filter = 0
 .fi
@@ -64,21 +64,21 @@
 Settings for "eth0" and "eth0.1" interfaces
 .nf
        # using "." as separator:
-       net.ipv6.conf.eth0.use_tempaddr = 1
-       net.ipv6.conf.eth0/1.use_tempaddr = 1
+       net.ipv6.conf.eth0.use_tempaddr = 2
+       net.ipv6.conf.eth0/1.use_tempaddr = 2
 
        # using "/" as separator:
-       net/ipv6/conf/eth0/use_tempaddr = 1
-       net/ipv6/conf/eth0.0/use_tempaddr = 1
+       net/ipv6/conf/eth0/use_tempaddr = 2
+       net/ipv6/conf/eth0.0/use_tempaddr = 2
 .fi
 
 Settings with variables:
 .nf
        # using "." as separator:
-       net.ipv6.conf.$SYSCTL_IF.use_tempaddr = 1
+       net.ipv6.conf.$SYSCTL_IF.use_tempaddr = 2
 
        # using "/" as separator:
-       net/ipv6/conf/$INTERFACE/use_tempaddr = 1
+       net/ipv6/conf/$INTERFACE/use_tempaddr = 2
 .fi
 
 To test your ifsysctl-eth0 or ifsysctl file, use:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/doc/netconfig.8 new/sysconfig-0.75.1/doc/netconfig.8
--- old/sysconfig-0.75.0/doc/netconfig.8        2010-11-16 13:37:09.000000000 
+0100
+++ new/sysconfig-0.75.1/doc/netconfig.8        2011-09-05 14:21:22.000000000 
+0200
@@ -230,7 +230,7 @@
 The special default value \fI"auto"\fR enables the build-in service ranking
 list, currently:
 .nf
-    "+strongswan +openswan +racoon +openvpn -avahi"
+    "+strongswan +openswan +racoon +openvpn +vpnc -avahi"
 .fi
 the value \fI"none"\fR or \fI""\fR allows to disable the ranking / sorting.
 
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/scripts/functions new/sysconfig-0.75.1/scripts/functions
--- old/sysconfig-0.75.0/scripts/functions      2011-03-15 17:55:55.000000000 
+0100
+++ new/sysconfig-0.75.1/scripts/functions      2011-09-05 14:21:22.000000000 
+0200
@@ -582,14 +582,24 @@
 # This function looks for interfaces which depend on the given interface. It
 # prints a list with all depending interfaces. It returns 0 if there are
 # depending interfaces and !=0 if not.
-# Currently it checks only for vlan and bonding interfaces.
+# Currently it checks only for vlan and optionally bonding slave interfaces.
 # FIXME: Add other types of interfaces that depend on others.
 get_depending_ifaces() {
-       local VLAN_PATH BOND_PATH DEP_IFACES DEP_VLANS DEP_BONDS BASE_IFACE i
+       local VLAN_PATH BOND_PATH DEP_VLANS DEP_BONDS BASE_IFACE i
+       local -a DEP_IFACES=()
        VLAN_PATH="/proc/net/vlan"
-       BOND_PATH="/proc/net/bonding"
+       BOND_PATH=""
+       while [ $# -gt 0 ]; do
+               case $1 in
+               --with-bonding-slaves)
+                       BOND_PATH="/proc/net/bonding"
+                       shift
+               ;;
+               -*)     shift ;;
+               *)      break ;;
+               esac
+       done
        BASE_IFACE="$1"
-       DEP_IFACES=""
 
        if [ -z "$BASE_IFACE" ]; then
                return 1
@@ -598,14 +608,14 @@
        if [ -d "$VLAN_PATH" ]; then
                DEP_VLANS=`cd "$VLAN_PATH"
                        grep -lws "Device: *$BASE_IFACE" *`
-               DEP_IFACES="$DEP_VLANS"
+               DEP_IFACES+=($DEP_VLANS)
        fi
 
-       if [ -d "$BOND_PATH" ]; then
+       if [ -n "$BOND_PATH" -a -d "$BOND_PATH" ]; then
                DEP_BONDS=`cd "$BOND_PATH"
                        grep -s '^Slave Interface:' $BASE_IFACE |
                        while IFS=':' read text iface ; do echo -n "$iface" ; 
done`
-               DEP_IFACES="$DEP_IFACES${DEP_BONDS:+ $DEP_BONDS}"
+               DEP_IFACES+=($DEP_BONDS)
        fi
 
        case $BASE_IFACE in
@@ -614,18 +624,18 @@
                        for i in `ls -1 /sys/class/net/ 2>/dev/null` ; do
                                test -d /sys/class/net/$i || continue
                                case $i in (${BASE_IFACE}.*)
-                                       DEP_IFACES="${DEP_IFACES}${i:+ $i}"
+                                       DEP_IFACES+=($i)
                                ;;
                                esac
                        done
                ;;
        esac
 
-       if [ -z "$DEP_IFACES" ]; then
-               return 1
-       else
-               echo "$DEP_IFACES"
+       if [ ${#DEP_IFACES[*]} -gt 0 ]; then
+               echo "${DEP_IFACES[*]}"
                return 0
+       else
+               return 1
        fi
 }
 
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/scripts/functions.netconfig 
new/sysconfig-0.75.1/scripts/functions.netconfig
--- old/sysconfig-0.75.0/scripts/functions.netconfig    2011-03-15 
17:49:47.000000000 +0100
+++ new/sysconfig-0.75.1/scripts/functions.netconfig    2011-09-05 
14:21:22.000000000 +0200
@@ -22,7 +22,7 @@
 r=$ROOT
 
 # builtin dns ranking defaults
-NETCONFIG_DNS_RANKING_DEFAULT="+strongswan +openswan +racoon +openvpn -avahi"
+NETCONFIG_DNS_RANKING_DEFAULT="+strongswan +openswan +racoon +openvpn +vpnc 
-avahi"
 
 test -z "$MD5DIR" && {
     MD5DIR=$r/var/adm/netconfig/md5
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/scripts/ifup new/sysconfig-0.75.1/scripts/ifup
--- old/sysconfig-0.75.0/scripts/ifup   2011-03-15 17:56:20.000000000 +0100
+++ new/sysconfig-0.75.1/scripts/ifup   2011-09-05 14:21:22.000000000 +0200
@@ -173,7 +173,9 @@
 ######################################################################
 # Find out the type of the interface
 # This may be overwritten in the configuration file
+# in cases the detection fails.
 #
+unset INTERFACETYPE
 test -z "$INTERFACETYPE" && INTERFACETYPE=`get_iface_type $INTERFACE`
 test -z "$INTERFACETYPE" && INTERFACETYPE=`get_iface_type_from_config 
$INTERFACE`
 # at least ifup-wireless needs $INTERFACETYPE, so we have to export it
@@ -225,13 +227,33 @@
 ######################################################################
 # Now source the configuration file and check if we have an interface
 #
+declare -r _INTERFACETYPE="$INTERFACETYPE"
+INTERFACETYPE=""
 if [ -n "$CONFIG" -a -r ifcfg-$CONFIG ] ; then
        . ifcfg-$CONFIG
+
+       # Complain when INTERFACETYPE is set in the config
+       # and ask the user to report a bug as it should be
+       # used only when detection fails, _not_ by default.
+       if test "X$INTERFACETYPE" != "X" ; then
+               IM=`printf "    %-9s" $INTERFACE`
+               BM=`printf "    %-9s" "" "      Please open a bug report."`
+               if test "X$INTERFACETYPE" = "X$_INTERFACETYPE" ; then
+                       logerror "$IM Warning: ifcfg-$CONFIG"\
+                                "overrides interface type detection.\n$BM"
+               else
+                       logerror "$IM Warning: ifcfg-$CONFIG"\
+                                "modifies interface type from"\
+                                "'$_INTERFACETYPE' to '$INTERFACETYPE'.\n$BM"
+               fi
+       fi
+
        # Store config name persistently for use in ifplugd-selectif after
        # interface has gone. Without that info it will not activate
        # alternative interface in this case. Used in get_ifplugd_priority()
        echo $CONFIG > $RUN_FILES_BASE/config-$INTERFACE
 fi
+test "X$INTERFACETYPE" = "X" && export INTERFACETYPE="$_INTERFACETYPE"
 
 ######################################################################
 # Check if the interface is available
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/scripts/ifup-wireless 
new/sysconfig-0.75.1/scripts/ifup-wireless
--- old/sysconfig-0.75.0/scripts/ifup-wireless  2011-03-15 17:49:47.000000000 
+0100
+++ new/sysconfig-0.75.1/scripts/ifup-wireless  2011-09-05 14:00:47.000000000 
+0200
@@ -304,7 +304,7 @@
                         # special hack for madwifi
                         test "$DRIVER" = "ath_pci" && run_iw_tool priv 
authmode 2
                         ;;
-                open|opensystem|"") WIRELESS_SEC_MODE="open";;
+                open|opensystem|no-encryption|"") WIRELESS_SEC_MODE="open";;
                 esac
         fi
         if [ -n "$WIRELESS_KEY_0" -a \
@@ -403,7 +403,7 @@
                         wlanctl dot11req_mibset 
mibattribute=dot11ExcludeUnencrypted=true
                         AUTHTYPE=sharedkey
                         ;;
-                        open|opensystem|"")
+                        open|opensystem|no-encryption|"")
                         wlanctl dot11req_mibset 
mibattribute=dot11ExcludeUnencrypted=false
                         AUTHTYPE=opensystem
                         ;;
@@ -540,7 +540,7 @@
     print_network_line ssid WIRELESS_ESSID "$SUFFIX"
     print_network_line_unquoted priority WIRELESS_PRIORITY "$SUFFIX"
     case "`eval echo \\$WIRELESS_AUTH_MODE$SUFFIX`" in
-    open)
+    open|no-encryption)
         echo "  key_mgmt=NONE"
         for i in 0 1 2 3 ; do
             KEY="`eval print_key \\"\\$WIRELESS_KEY_$i$SUFFIX\\" 
\\$WIRELESS_KEY_LENGTH$SUFFIX`"
@@ -776,6 +776,14 @@
                 PREFER_WPA_SUPPLICANT=no
                 ;;
         esac
+
+        case $WIRELESS_POWER in
+            ""|none) ;;
+            yes)     run_iw_tool config power period 2 ;;
+            no)      run_iw_tool config power off ;;
+            *)       run_iw_tool config power $WIRELESS_POWER ;;
+        esac
+
         if need_wpa_supplicant ; then
             info_mesg "configuration requires wpa_supplicant"
             set_default_wpa_driver
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/scripts/netconfig.d/dns-bind 
new/sysconfig-0.75.1/scripts/netconfig.d/dns-bind
--- old/sysconfig-0.75.0/scripts/netconfig.d/dns-bind   2010-11-16 
13:37:09.000000000 +0100
+++ new/sysconfig-0.75.1/scripts/netconfig.d/dns-bind   2011-06-10 
14:57:11.000000000 +0200
@@ -240,7 +240,9 @@
     DNS_SERVERS_2="$DNS_SERVERS_2 $NETCONFIG_DNS_STATIC_SERVERS"
 fi
 
-# filter out loopback addresses that would case a loop
+# filter out loopback addresses and all own IPs that would case a loop
+own_ips=(`ip addr show 2>/dev/null | \
+LANG=C LC_ALL=C gawk '/[ ]+(inet|inet6)[ ]+/ { sub("/.*","",$2); print $2; }' 
2>/dev/null`)
 for idx in 0 1 2 ; do
     var="DNS_SERVERS_$idx"
     val=(${!var})
@@ -248,7 +250,13 @@
     for ns in ${val[@]} ; do
         case $ns in
             127.*|::1)      ;;
-            *) new+=("$ns") ;;
+            *)
+                for ip in "${own_ips[@]}" ; do
+                    test "x$ip" = "x"    && continue
+                    test "x$ip" = "x$ns" && continue 2
+                done
+                new+=("$ns")
+            ;;
         esac
     done
     eval "${var}='${new[@]}'"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/scripts/netconfig.d/dns-dnsmasq 
new/sysconfig-0.75.1/scripts/netconfig.d/dns-dnsmasq
--- old/sysconfig-0.75.0/scripts/netconfig.d/dns-dnsmasq        2010-11-16 
13:37:09.000000000 +0100
+++ new/sysconfig-0.75.1/scripts/netconfig.d/dns-dnsmasq        2011-06-10 
14:57:11.000000000 +0200
@@ -242,7 +242,9 @@
     DNS_SERVERS_2="$DNS_SERVERS_2 $NETCONFIG_DNS_STATIC_SERVERS"
 fi
 
-# filter out loopback addresses that would case a loop
+# filter out loopback addresses and all own IPs that would case a loop
+own_ips=(`ip addr show 2>/dev/null | \
+LANG=C LC_ALL=C gawk '/[ ]+(inet|inet6)[ ]+/ { sub("/.*","",$2); print $2; }' 
2>/dev/null`)
 for idx in 0 1 2 ; do
     var="DNS_SERVERS_$idx"
     val=(${!var})
@@ -250,7 +252,13 @@
     for ns in ${val[@]} ; do
         case $ns in
             127.*|::1)      ;;
-            *) new+=("$ns") ;;
+            *)
+                for ip in "${own_ips[@]}" ; do
+                    test "x$ip" = "x"    && continue
+                    test "x$ip" = "x$ns" && continue 2
+                done
+                new+=("$ns")
+            ;;
         esac
     done
     eval "${var}='${new[@]}'"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/scripts/network new/sysconfig-0.75.1/scripts/network
--- old/sysconfig-0.75.0/scripts/network        2011-03-15 17:49:47.000000000 
+0100
+++ new/sysconfig-0.75.1/scripts/network        2011-09-05 14:21:22.000000000 
+0200
@@ -102,6 +102,15 @@
    || exit $R_INTERNAL
 
 
+systemd_running () {
+# We simply test whether systemd cgroup hierarchy is mounted
+       if /bin/mountpoint -q /sys/fs/cgroup/systemd ; then 
+               return 1
+       fi
+       return 0
+}
+
+
 ######################################################################
 # Start NetworkManager if wanted
 #
@@ -110,9 +119,12 @@
 # because they are also used in ifup
 #
 if [ "$NETWORKMANAGER" = yes ] ; then
-       if [ "$FS_FILTER" = "localfs" ] ; then
+       systemd_running ; sd=$?
+       if [ "$FS_FILTER" = "localfs" -o $sd = 1 ] ; then
                # NetworkManager is not supported without remotefs
                # and will be started later via network-remotefs.
+               # NetworkManager should be started with its own .service
+               # under systemd
                case $ACTION in
                        (status) exit 3 ;;
                        (start)  exit 0 ;;
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/sysconfig.spec new/sysconfig-0.75.1/sysconfig.spec
--- old/sysconfig-0.75.0/sysconfig.spec 2011-03-15 18:42:08.000000000 +0100
+++ new/sysconfig-0.75.1/sysconfig.spec 2011-09-05 15:49:35.000000000 +0200
@@ -19,9 +19,9 @@
 
 
 Name:           sysconfig
-Version:        0.75.0
+Version:        0.75.1
 Release:        0
-Summary:        The system configuration scheme
+Summary:        The sysconfig scheme and traditional network scripts
 Url:            http://gitorious.org/opensuse/sysconfig
 Group:          System/Base
 License:        GPLv2+
@@ -54,7 +54,7 @@
 
 %build
 autoreconf --force --install
-CFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing -fPIC" \
+CFLAGS="$RPM_OPT_FLAGS -fPIC" \
 ./configure --prefix=/ \
             --sbindir=/sbin \
             --libdir=/%_lib \
@@ -72,8 +72,6 @@
 
 %install
 make DESTDIR=$RPM_BUILD_ROOT install
-# This directory is not used since some time (was used for ifup locking)
-mkdir -p $RPM_BUILD_ROOT/var/lock/subsys/sysconfig
 touch $RPM_BUILD_ROOT/etc/sysconfig/network/config
 touch $RPM_BUILD_ROOT/etc/sysconfig/network/dhcp
 # install udevmountd
@@ -113,7 +111,6 @@
 /usr/share/omc/svcinfo.d/network.xml
 /var/adm/fillup-templates/sysconfig.dhcp-network
 /var/adm/fillup-templates/sysconfig.config-network
-%dir /var/lock/subsys/sysconfig
 
 %pre
 # package update ?
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' 
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude 
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh 
old/sysconfig-0.75.0/sysconfig.spec.in new/sysconfig-0.75.1/sysconfig.spec.in
--- old/sysconfig-0.75.0/sysconfig.spec.in      2011-03-15 18:37:23.000000000 
+0100
+++ new/sysconfig-0.75.1/sysconfig.spec.in      2011-09-05 14:21:22.000000000 
+0200
@@ -21,7 +21,7 @@
 Name:           sysconfig
 Version:        @VERSION@
 Release:        0
-Summary:        The system configuration scheme
+Summary:        The sysconfig scheme and traditional network scripts
 Url:            http://gitorious.org/opensuse/sysconfig
 Group:          System/Base
 License:        GPLv2+
@@ -54,7 +54,7 @@
 
 %build
 autoreconf --force --install
-CFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing -fPIC" \
+CFLAGS="$RPM_OPT_FLAGS -fPIC" \
 ./configure --prefix=/ \
             --sbindir=/sbin \
             --libdir=/%_lib \
@@ -72,8 +72,6 @@
 
 %install
 make DESTDIR=$RPM_BUILD_ROOT install
-# This directory is not used since some time (was used for ifup locking)
-mkdir -p $RPM_BUILD_ROOT/var/lock/subsys/sysconfig
 touch $RPM_BUILD_ROOT/etc/sysconfig/network/config
 touch $RPM_BUILD_ROOT/etc/sysconfig/network/dhcp
 # install udevmountd
@@ -113,7 +111,6 @@
 /usr/share/omc/svcinfo.d/network.xml
 /var/adm/fillup-templates/sysconfig.dhcp-network
 /var/adm/fillup-templates/sysconfig.config-network
-%dir /var/lock/subsys/sysconfig
 
 %pre
 # package update ?


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++



Remember to have fun...

-- 
To unsubscribe, e-mail: opensuse-commit+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-commit+help@xxxxxxxxxxxx