Mailinglist Archive: opensuse-commit (849 mails)

< Previous Next >
commit kiwi for openSUSE:Factory

Hello community,

here is the log from the commit of package kiwi for openSUSE:Factory
checked in at Tue Mar 15 10:23:56 CET 2011.



--------
--- kiwi/kiwi.changes 2011-03-02 11:23:18.000000000 +0100
+++ /mounts/work_src_done/STABLE/kiwi/kiwi.changes 2011-03-14
17:56:28.000000000 +0100
@@ -1,0 +2,237 @@
+Mon Mar 14 17:15:03 CET 2011 - ms@xxxxxxx
+
+- fixed the udev trigger call which must only be called
+ one time after the udev daemon has started (bnc #668014)
+
+-------------------------------------------------------------------
+Mon Mar 14 16:37:57 CET 2011 - ms@xxxxxxx
+
+- fixed setup of the loader initrd variable. Normally this variable
+ is set via the kernel commandline but in case of a PXE setup it
+ might be missing. In that case we check if the bootloader is
+ present as .profile variable in kiwi_bootloader and set loader
+ appropriately
+
+-------------------------------------------------------------------
+Mon Mar 14 16:33:18 CET 2011 - ms@xxxxxxx
+
+- fixed OEM PXE installation code. Wrong function name, checkServer
+ was renamed into pxeCheckServer and the image file in case of a
+ pxe installation is gzip compressed not squashfs embedded
+
+-------------------------------------------------------------------
+Mon Mar 14 15:55:54 CET 2011 - ms@xxxxxxx
+
+- DB: update documentation, fixed typos
+
+-------------------------------------------------------------------
+Mon Mar 14 14:48:34 CET 2011 - ms@xxxxxxx
+
+- fixed spec file, kiwi-desc-usbboot was dropped
+
+-------------------------------------------------------------------
+Mon Mar 14 11:59:26 CET 2011 - ms@xxxxxxx
+
+- added netboot root configuration check. The NFSROOT setup in
+ combination with clicfs is not allowed. It doesn't make sense
+ because it requires the clicfs process to run on the NFS server
+ which would allow to connect only one station safely. AOEROOT
+ or NBDROOT should be used in combination with clicfs instead
+
+-------------------------------------------------------------------
+Mon Mar 14 11:57:08 CET 2011 - ms@xxxxxxx
+
+- added kernel-firmware package to boot images
+
+-------------------------------------------------------------------
+Mon Mar 14 11:11:01 CET 2011 - ms@xxxxxxx
+
+- DB: update documentation, added a section about OEM -> pxe install
+
+-------------------------------------------------------------------
+Fri Mar 11 15:45:52 CET 2011 - ms@xxxxxxx
+
+- v4.81 released
+
+-------------------------------------------------------------------
+Fri Mar 11 15:05:56 CET 2011 - ms@xxxxxxx
+
+- added function resetBootBind() which turns the bind mounted
+ boot path into a standard distro path which allows kernel
+ updates. resetBootBind() is only called if mkinitrd can
+ be used according to the image root filesystem setup. Along
+ with the resetBootBind change we also had to fix the setup
+ of the fat boot partition if the syslinux bootloader is used.
+ Normally there is a link named boot -> . but on fat we can't
+ have links so the data has to be moved. (bnc #678159)
+
+-------------------------------------------------------------------
+Fri Mar 11 11:02:28 CET 2011 - ms@xxxxxxx
+
+- adapt recent changes to x86 linuxrc to the s390 code stream
+
+-------------------------------------------------------------------
+Fri Mar 11 10:30:51 CET 2011 - ms@xxxxxxx
+
+- fixed typo in motd message of 11.4 JeOS
+
+-------------------------------------------------------------------
+Fri Mar 11 09:31:30 CET 2011 - ms@xxxxxxx
+
+- DB: update documentation for ramonly attribute
+
+-------------------------------------------------------------------
+Thu Mar 10 19:19:21 CET 2011 - ms@xxxxxxx
+
+- fixed syslinux boot partition setup, links on fat does not exist
+
+-------------------------------------------------------------------
+Thu Mar 10 18:45:52 CET 2011 - ms@xxxxxxx
+
+- added optional type attribute ramonly="true" which forces
+ the COW device in a overlay filesystem setup to point to the
+ main RAM memory
+
+-------------------------------------------------------------------
+Thu Mar 10 18:44:28 CET 2011 - ms@xxxxxxx
+
+- DB: update schema documentation
+
+-------------------------------------------------------------------
+Thu Mar 10 17:17:56 CET 2011 - ms@xxxxxxx
+
+- fixed evaluation of $main::FatStorage. I put it too late
+ in the code so that the overall disk size wasn't adjusted
+
+-------------------------------------------------------------------
+Thu Mar 10 15:46:40 CET 2011 - ms@xxxxxxx
+
+- removed usbboot boot image and usb image type from kiwi. The
+ obsolete usb image type has been replaced by the hybrid iso
+ image type or by the oem image type.
+
+-------------------------------------------------------------------
+Thu Mar 10 15:15:44 CET 2011 - ms@xxxxxxx
+
+- DB: update documentation and removed the suse-live-stick examples.
+- DB: suse-live-stick are now handled by the hybrid iso examples
+
+-------------------------------------------------------------------
+Thu Mar 10 10:25:23 CET 2011 - ms@xxxxxxx
+
+- added more careful grub install check
+
+-------------------------------------------------------------------
+Wed Mar 9 12:09:56 CET 2011 - ms@xxxxxxx
+
+- When mounting the hybrid boot drive, select the partition
+ marked as bootable instead of blindly mounting the first one.
+ This change makes it possible to update the system if the
+ image has been written to a writable medium.
+
+-------------------------------------------------------------------
+Wed Mar 9 11:59:27 CET 2011 - ms@xxxxxxx
+
+- DB: update documentation, man page update (new options)
+
+-------------------------------------------------------------------
+Wed Mar 9 11:56:25 CET 2011 - ms@xxxxxxx
+
+- fixed syslinux boot device setup if LVM is used
+
+-------------------------------------------------------------------
+Wed Mar 9 11:19:30 CET 2011 - ms@xxxxxxx
+
+- make the creation of USB sticks more Windows friendly.
+ For a detailed description how this is done watch the
+ bug report: (bnc #677246)
+
+-------------------------------------------------------------------
+Tue Mar 8 18:26:10 CET 2011 - ms@xxxxxxx
+
+- fixed spec file for s390 build
+
+-------------------------------------------------------------------
+Tue Mar 8 18:20:16 CET 2011 - ms@xxxxxxx
+
+- fixed spec file for ppc build
+
+-------------------------------------------------------------------
+Fri Mar 4 13:55:09 CET 2011 - ms@xxxxxxx
+
+- netboot: allow network boot in degraded raid mode (bnc #668014)
+- netboot: remove superblocks from raid disks if RAID
+ has been dectivated in config.<MAC> (bnc #668014)
+
+-------------------------------------------------------------------
+Fri Mar 4 11:45:07 CET 2011 - ms@xxxxxxx
+
+- added support for the ncpus attribute on the <machine>
+ element. It is used to set the number of virtual cpus for a
+ VM and written to .vmx and .xenconfig
+
+-------------------------------------------------------------------
+Thu Mar 3 13:02:17 CET 2011 - ms@xxxxxxx
+
+- fixed xsl stylesheet convert47to48.xsl. existing lvmvolumes
+ section wasn't translated into systemdisk section
+
+-------------------------------------------------------------------
+Thu Mar 3 11:54:57 CET 2011 - ms@xxxxxxx
+
+- added KIWICommandLine and KIWIRuntimeChecker modules. The command
+ line module is a storage container for the commandline options
+ passed to kiwi. It's used to transport the data into other objects.
+ One successor of KIWICommandLine is the KIWIRuntimeChecker module
+ which does some checks while kiwi runs. This means kiwi reads in
+ the image description and after that the runtimer checker checks
+ if it is possible to build the desired image according to the
+ specified information. If that tests are passed kiwi enters the
+ actual processing mode which is either the image prepare or create.
+ This is useful to exit early if some option combination or data
+ set is valid according to the XML schema but can't be build due
+ to other reasons.
+
+-------------------------------------------------------------------
+Thu Mar 3 09:50:52 CET 2011 - ms@xxxxxxx
+
++++ 40 more lines (skipped)
++++ between kiwi/kiwi.changes
++++ and /mounts/work_src_done/STABLE/kiwi/kiwi.changes

calling whatdependson for head-i586


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Other differences:
------------------
++++++ kiwi.spec ++++++
--- /var/tmp/diff_new_pack.BnEyRm/_old 2011-03-15 10:21:50.000000000 +0100
+++ /var/tmp/diff_new_pack.BnEyRm/_new 2011-03-15 10:21:50.000000000 +0100
@@ -65,7 +65,7 @@
%endif
%endif
Summary: OpenSuSE - KIWI Image System
-Version: 4.80
+Version: 4.81
Release: 1
Group: System/Management
License: GPLv2
@@ -74,7 +74,9 @@
Source2: %{name}-docu.tar.bz2
Source3: %{name}-repo.tar.bz2
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Recommends: smart zypper
+Recommends: zypper
+Provides: kiwi-desc-usbboot
+Obsoletes: kiwi-desc-usbboot

%description
The OpenSuSE KIWI Image System provides a complete operating system
@@ -181,25 +183,6 @@
Marcus Schaefer <ms@xxxxxxxxxx>
%endif

-%ifarch %ix86 x86_64
-
-%package -n kiwi-desc-usbboot
-License: GPLv2+
-Requires: kiwi = %{version}
-Summary: OpenSuSE - KIWI Image System USB boot
-Group: System/Management
-%if 0%{?suse_version} > 1120
-BuildArch: noarch
-%endif
-
-%description -n kiwi-desc-usbboot
-kiwi boot (initrd) image for activating system images on USB stick
-
-Authors:
---------
- Marcus Schaefer <ms@xxxxxxxxxx>
-%endif
-
%ifarch %ix86 x86_64 s390 s390x

%package -n kiwi-desc-vmxboot
@@ -209,11 +192,15 @@
%ifarch %ix86 x86_64
Requires: grub
%endif
+%ifarch ppc ppc64 s390 s390x
+Requires: virt-utils
+%else
%if 0%{?suse_version} >= 1130
Requires: virt-utils
%else
Requires: qemu
%endif
+%endif
Summary: OpenSuSE - KIWI Image System Virtual Machine boot
Group: System/Management
%if 0%{?suse_version} > 1120
@@ -247,16 +234,20 @@
Marcus Schaefer <ms@xxxxxxxxxx>
%endif

-%ifarch %ix86 x86_64 s390 s390x
+%ifarch %ix86 x86_64 ppc ppc64 s390 s390x

%package -n kiwi-desc-oemboot
License: GPLv2
Requires: kiwi = %{version}
+%ifarch ppc ppc64 s390 s390x
+Requires: virt-utils
+%else
%if 0%{?suse_version} >= 1130
Requires: virt-utils
%else
Requires: qemu
%endif
+%endif
Requires: multipath-tools parted
%ifarch %ix86 x86_64
Requires: grub
@@ -475,15 +466,6 @@

%ifarch %ix86 x86_64

-%files -n kiwi-desc-usbboot
-%defattr(-, root, root)
-%dir %{_datadir}/kiwi/image/usbboot
-%doc %{_datadir}/kiwi/image/usbboot/README
-%{_datadir}/kiwi/image/usbboot/suse*
-%endif
-
-%ifarch %ix86 x86_64
-
%files -n kiwi-desc-netboot
%defattr(-, root, root)
%dir %{_datadir}/kiwi/image/netboot
@@ -491,7 +473,7 @@
%{_datadir}/kiwi/image/netboot/suse*
%endif

-%ifarch %ix86 x86_64 s390 s390x
+%ifarch %ix86 x86_64 ppc ppc64 s390 s390x

%files -n kiwi-desc-oemboot
%defattr(-, root, root)

++++++ kiwi-docu.tar.bz2 ++++++
kiwi/kiwi-docu.tar.bz2 /mounts/work_src_done/STABLE/kiwi/kiwi-docu.tar.bz2
differ: char 11, line 1

++++++ kiwi-repo.tar.bz2 ++++++
kiwi/kiwi-repo.tar.bz2 /mounts/work_src_done/STABLE/kiwi/kiwi-repo.tar.bz2
differ: char 23314601, line 90280

++++++ kiwi.tar.bz2 ++++++
++++ 7621 lines of diff (skipped)


++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++



Remember to have fun...

--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-commit+help@xxxxxxxxxxxx

< Previous Next >