Hello community,
here is the log from the commit of package xorg-x11 for openSUSE:Factory
checked in at Mon Nov 8 12:50:45 CET 2010.
--------
--- xorg-x11/xorg-x11.changes 2010-11-03 12:51:42.000000000 +0100
+++ xorg-x11/xorg-x11.changes 2010-11-06 18:43:04.000000000 +0100
@@ -1,0 +2,8 @@
+Sat Nov 6 17:42:12 UTC 2010 - sndirsch@novell.com
+
+- xvinfo 1.1.1
+ * This minor maintenance release provides the usual recent
+ collection of build configuration improvements and janitorial
+ cleanups.
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
xvinfo-1.1.0.tar.bz2
New:
----
xvinfo-1.1.1.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ xorg-x11.spec ++++++
--- /var/tmp/diff_new_pack.mrEWqV/_old 2010-11-08 12:50:23.000000000 +0100
+++ /var/tmp/diff_new_pack.mrEWqV/_new 2010-11-08 12:50:23.000000000 +0100
@@ -23,7 +23,7 @@
BuildRequires: bison
Url: http://xorg.freedesktop.org/
Version: 7.5
-Release: 29
+Release: 30
License: MIT License (or similar)
BuildRoot: %{_tmppath}/%{name}-%{version}-build
Group: System/X11/Utilities
@@ -119,7 +119,7 @@
Source86: xstdcmap-1.0.2.tar.bz2
Source87: xtrap-X11R7.1-1.0.2.tar.bz2
Source88: xvidtune-1.0.2.tar.bz2
-Source89: xvinfo-1.1.0.tar.bz2
+Source89: xvinfo-1.1.1.tar.bz2
Source90: xwd-1.0.3.tar.bz2
Source91: xwininfo-1.1.1.tar.bz2
Source92: xwud-1.0.2.tar.bz2
++++++ xvinfo-1.1.0.tar.bz2 -> xvinfo-1.1.1.tar.bz2 ++++++
++++ 8555 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.0/ChangeLog new/xvinfo-1.1.1/ChangeLog
--- old/xvinfo-1.1.0/ChangeLog 2009-10-17 04:48:41.000000000 +0200
+++ new/xvinfo-1.1.1/ChangeLog 2010-11-06 16:59:49.000000000 +0100
@@ -1,3 +1,120 @@
+commit 2abf1e4cbff8b67f836dd4102dcc0a179d98a142
+Author: Alan Coopersmith
+Date: Sat Nov 6 08:59:31 2010 -0700
+
+ xvinfo 1.1.1
+
+ Signed-off-by: Alan Coopersmith
+
+commit 3d447fb4fd0f75e3dbaa7c1c9d3eb565fdfc1214
+Author: Jesse Adkins
+Date: Tue Sep 28 13:29:50 2010 -0700
+
+ Purge cvs tags.
+
+ Signed-off-by: Jesse Adkins
+ Signed-off-by: Alan Coopersmith
+
+commit 6961d77007443b63a014362805bd93c20d853ab7
+Author: Alan Coopersmith
+Date: Sun Sep 26 18:26:41 2010 -0700
+
+ config: Remove unnecessary calls from configure.ac
+
+ AC_PROG_CC & AC_PROG_INSTALL are provided by XORG_DEFAULT_OPTIONS now
+ PKG_CONFIG_MODULES handles AC_SUBST of the CFLAGS & LIBS variables
+
+ Signed-off-by: Alan Coopersmith
+
+commit a69ea17324a94d667fc1661b70f2a365b75f3c6b
+Author: Alan Coopersmith
+Date: Sun Sep 26 18:25:57 2010 -0700
+
+ config: upgrade to util-macros 1.8 for additional man page support
+
+ Use MAN_SUBST now supplied in XORG_MANPAGE_SECTIONS
+ The value of MAN_SUBST is the same for all X.Org packages.
+
+ Use AC_PROG_SED now supplied by XORG_DEFAULT_OPTIONS
+ Enables use of platform appropriate version of sed.
+
+ Signed-off-by: Alan Coopersmith
+
+commit 8c8a1727709dab613f97548ee374f3ffc8946653
+Author: Gaetan Nadon
+Date: Tue Jul 20 18:45:18 2010 -0400
+
+ config: update AC_PREREQ statement to 2.60
+
+ Unrelated to the previous patches, the new value simply reflects
+ the reality that the minimum level for autoconf to configure
+ all x.org modules is 2.60 dated June 2006.
+
+ ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz
+
+ Signed-off-by: Gaetan Nadon
+
+commit 0bd2b71d9ce58a2661db584a6c6a03aec06e701c
+Author: Gaetan Nadon
+Date: Thu Nov 26 09:19:55 2009 -0500
+
+ Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES
+
+ Now that the INSTALL file is generated.
+ Allows running make maintainer-clean.
+
+commit 6d33f774fdead950a8561598b84a10ddb970f20c
+Author: Gaetan Nadon
+Date: Wed Oct 28 14:09:09 2009 -0400
+
+ INSTALL, NEWS, README or AUTHORS files are missing/incorrect #24206
+
+ Add missing INSTALL file. Use standard GNU file on building tarball
+ README may have been updated
+ Remove AUTHORS file as it is empty and no content available yet.
+ Remove NEWS file as it is empty and no content available yet.
+
+commit fd408b06820004bf0cc090844ec28764f090339b
+Author: Gaetan Nadon
+Date: Mon Oct 26 22:08:39 2009 -0400
+
+ Makefile.am: ChangeLog not required: EXTRA_DIST or *CLEANFILES #24432
+
+ ChangeLog filename is known to Automake and requires no further
+ coding in the makefile.
+
+commit a5311e7cf9744cc84e2c0b55ab67850bb5907532
+Author: Gaetan Nadon
+Date: Thu Oct 22 12:34:16 2009 -0400
+
+ .gitignore: use common defaults with custom section # 24239
+
+ Using common defaults will reduce errors and maintenance.
+ Only the very small or inexistent custom section need periodic maintenance
+ when the structure of the component changes. Do not edit defaults.
+
+commit 8e37a3ede56ab5f5769e279ab180781880837ad4
+Author: Jeremy Huddleston
+Date: Wed Oct 21 12:47:22 2009 -0700
+
+ This is not a GNU project, so declare it foreign.
+
+ On Wed, 2009-10-21 at 13:36 +1000, Peter Hutterer wrote:
+ > On Tue, Oct 20, 2009 at 08:23:55PM -0700, Jeremy Huddleston wrote:
+ > > I noticed an INSTALL file in xlsclients and libXvMC today, and it
+ > > was quite annoying to work around since 'autoreconf -fvi' replaces
+ > > it and git wants to commit it. Should these files even be in git?
+ > > Can I nuke them for the betterment of humanity and since they get
+ > > created by autoreconf anyways?
+ >
+ > See https://bugs.freedesktop.org/show_bug.cgi?id=24206
+
+ As an interim measure, replace AM_INIT_AUTOMAKE([dist-bzip2]) with
+ AM_INIT_AUTOMAKE([foreign dist-bzip2]). This will prevent the generation
+ of the INSTALL file. It is also part of the 24206 solution.
+
+ Signed-off-by: Jeremy Huddleston
+
commit 32827c5b0928d61de0ab397beb8123ac0c4e1649
Author: Alan Coopersmith
Date: Fri Oct 16 19:46:04 2009 -0700
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.0/INSTALL new/xvinfo-1.1.1/INSTALL
--- old/xvinfo-1.1.0/INSTALL 2006-07-11 04:54:40.000000000 +0200
+++ new/xvinfo-1.1.1/INSTALL 2010-11-06 16:59:49.000000000 +0100
@@ -0,0 +1,291 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008 Free Software Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.0/Makefile.am new/xvinfo-1.1.1/Makefile.am
--- old/xvinfo-1.1.0/Makefile.am 2009-10-17 04:36:33.000000000 +0200
+++ new/xvinfo-1.1.1/Makefile.am 2010-09-27 03:25:44.000000000 +0200
@@ -35,37 +35,22 @@
appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@)
-EXTRA_DIST = $(appman_PRE) ChangeLog
+EXTRA_DIST = $(appman_PRE)
+MAINTAINERCLEANFILES = ChangeLog INSTALL
CLEANFILES = $(appman_DATA)
-MAINTAINERCLEANFILES = ChangeLog
-.PHONY: ChangeLog
+.PHONY: ChangeLog INSTALL
+
+INSTALL:
+ $(INSTALL_CMD)
ChangeLog:
$(CHANGELOG_CMD)
-dist-hook: ChangeLog
-
-SED = sed
-
-# Strings to replace in man pages
-XORGRELSTRING = @PACKAGE_STRING@
- XORGMANNAME = X Version 11
-
-MAN_SUBSTS = \
- -e 's|__vendorversion__|"$(XORGRELSTRING)" "$(XORGMANNAME)"|' \
- -e 's|__xorgversion__|"$(XORGRELSTRING)" "$(XORGMANNAME)"|' \
- -e 's|__xservername__|Xorg|g' \
- -e 's|__xconfigfile__|xorg.conf|g' \
- -e 's|__projectroot__|$(prefix)|g' \
- -e 's|__apploaddir__|$(appdefaultdir)|' \
- -e 's|__appmansuffix__|$(APP_MAN_SUFFIX)|g' \
- -e 's|__libmansuffix__|$(LIB_MAN_SUFFIX)|g' \
- -e 's|__adminmansuffix__|$(ADMIN_MAN_SUFFIX)|g' \
- -e 's|__miscmansuffix__|$(MISC_MAN_SUFFIX)|g' \
- -e 's|__filemansuffix__|$(FILE_MAN_SUFFIX)|g'
+dist-hook: ChangeLog INSTALL
SUFFIXES = .$(APP_MAN_SUFFIX) .man
+# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
.man.$(APP_MAN_SUFFIX):
$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.0/config.h.in new/xvinfo-1.1.1/config.h.in
--- old/xvinfo-1.1.0/config.h.in 2009-10-17 04:46:27.000000000 +0200
+++ new/xvinfo-1.1.1/config.h.in 2010-11-06 16:59:45.000000000 +0100
@@ -42,6 +42,9 @@
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
/* Define to the version of this package. */
#undef PACKAGE_VERSION
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.0/configure.ac new/xvinfo-1.1.1/configure.ac
--- old/xvinfo-1.1.0/configure.ac 2009-10-17 04:45:51.000000000 +0200
+++ new/xvinfo-1.1.1/configure.ac 2010-11-06 16:58:59.000000000 +0100
@@ -21,26 +21,22 @@
dnl
dnl Process this file with autoconf to create configure.
-AC_PREREQ([2.57])
-AC_INIT(xvinfo, [1.1.0], [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],xvinfo)
-AM_INIT_AUTOMAKE([dist-bzip2])
+AC_PREREQ([2.60])
+AC_INIT([xvinfo], [1.1.1],
+ [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg], [xvinfo])
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
AM_MAINTAINER_MODE
-# Require xorg-macros 1.3 or later: XORG_DEFAULT_OPTIONS
+# Require X.Org macros 1.8 or later for MAN_SUBSTS set by XORG_MANPAGE_SECTIONS
m4_ifndef([XORG_MACROS_VERSION],
- [m4_fatal([must install xorg-macros 1.3 or later before running autoconf/autogen])])
-XORG_MACROS_VERSION(1.3)
+ [m4_fatal([must install xorg-macros 1.8 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.8)
AM_CONFIG_HEADER(config.h)
-AC_PROG_CC
-AC_PROG_INSTALL
-
XORG_DEFAULT_OPTIONS
# Checks for pkg-config packages
PKG_CHECK_MODULES(XVINFO, xv x11)
-AC_SUBST(XVINFO_CFLAGS)
-AC_SUBST(XVINFO_LIBS)
AC_OUTPUT([Makefile])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.0/xvinfo.c new/xvinfo-1.1.1/xvinfo.c
--- old/xvinfo-1.1.0/xvinfo.c 2009-08-04 04:36:24.000000000 +0200
+++ new/xvinfo-1.1.1/xvinfo.c 2010-10-07 05:38:37.000000000 +0200
@@ -1,5 +1,3 @@
-/* $XFree86: xc/programs/xvinfo/xvinfo.c,v 1.7 2001/10/28 03:34:43 tsi Exp $ */
-
#include
#include
#include
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/xvinfo-1.1.0/xvinfo.man new/xvinfo-1.1.1/xvinfo.man
--- old/xvinfo-1.1.0/xvinfo.man 2009-08-04 04:36:24.000000000 +0200
+++ new/xvinfo-1.1.1/xvinfo.man 2010-10-07 05:38:37.000000000 +0200
@@ -1,6 +1,3 @@
-.\" $XdotOrg: $
-.\" $XFree86: xc/programs/xvinfo/xvinfo.man,v 1.2 2001/01/24 00:06:51 dawes Exp $
-.\"
.TH xvinfo __appmansuffix__ __vendorversion__
.SH NAME
xvinfo - Print out X-Video extension adaptor information
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org