Hello community,
here is the log from the commit of package pixman for openSUSE:Factory
checked in at Thu Apr 1 18:23:42 CEST 2010.
--------
--- pixman/pixman.changes 2010-03-24 05:52:44.000000000 +0100
+++ /mounts/work_src_done/STABLE/pixman/pixman.changes 2010-04-01 15:17:34.000000000 +0200
@@ -1,0 +2,6 @@
+Thu Apr 1 15:10:46 CEST 2010 - vuntz@opensuse.org
+
+- Update to version 0.18.0:
+ + No code change, just a version bump for a stable release.
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
pixman-0.17.14.tar.bz2
New:
----
pixman-0.18.0.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ pixman.spec ++++++
--- /var/tmp/diff_new_pack.rsm7qH/_old 2010-04-01 18:23:33.000000000 +0200
+++ /var/tmp/diff_new_pack.rsm7qH/_new 2010-04-01 18:23:33.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package pixman (Version 0.17.14)
+# spec file for package pixman (Version 0.18.0)
#
# Copyright (c) 2010 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -18,7 +18,7 @@
Name: pixman
-Version: 0.17.14
+Version: 0.18.0
Release: 1
License: MIT License (or similar)
Summary: Pixel manipulation library
++++++ pixman-0.17.14.tar.bz2 -> pixman-0.18.0.tar.bz2 ++++++
++++ 57747 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pixman-0.17.14/config.h.in new/pixman-0.18.0/config.h.in
--- old/pixman-0.17.14/config.h.in 2010-03-23 21:52:27.000000000 +0100
+++ new/pixman-0.18.0/config.h.in 2010-04-01 11:24:12.000000000 +0200
@@ -42,6 +42,10 @@
/* Define to 1 if you have the header file. */
#undef HAVE_UNISTD_H
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
/* Name of package */
#undef PACKAGE
@@ -57,6 +61,9 @@
/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
/* Define to the version of this package. */
#undef PACKAGE_VERSION
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pixman-0.17.14/configure.ac new/pixman-0.18.0/configure.ac
--- old/pixman-0.17.14/configure.ac 2010-03-23 21:51:43.000000000 +0100
+++ new/pixman-0.18.0/configure.ac 2010-04-01 11:23:07.000000000 +0200
@@ -53,8 +53,8 @@
#
m4_define([pixman_major], 0)
-m4_define([pixman_minor], 17)
-m4_define([pixman_micro], 14)
+m4_define([pixman_minor], 18)
+m4_define([pixman_micro], 0)
m4_define([pixman_version],[pixman_major.pixman_minor.pixman_micro])
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pixman-0.17.14/missing new/pixman-0.18.0/missing
--- old/pixman-0.17.14/missing 2009-04-04 11:21:30.000000000 +0200
+++ new/pixman-0.18.0/missing 2009-10-15 14:05:46.000000000 +0200
@@ -1,10 +1,10 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2006-05-10.23
+scriptversion=2009-04-28.21; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program. If not, see http://www.gnu.org/licenses/.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -89,6 +87,9 @@
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
Send bug reports to ."
exit $?
;;
@@ -106,15 +107,22 @@
esac
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
-# the program).
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
case $1 in
- lex|yacc)
+ lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
- tar)
+ tar*)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
@@ -138,7 +146,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case $1 in
+case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -148,7 +156,7 @@
touch aclocal.m4
;;
- autoconf)
+ autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
@@ -157,7 +165,7 @@
touch configure
;;
- autoheader)
+ autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
@@ -187,7 +195,7 @@
while read f; do touch "$f"; done
;;
- autom4te)
+ autom4te*)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
@@ -210,7 +218,7 @@
fi
;;
- bison|yacc)
+ bison*|yacc*)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
@@ -240,7 +248,7 @@
fi
;;
- lex|flex)
+ lex*|flex*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
@@ -263,7 +271,7 @@
fi
;;
- help2man)
+ help2man*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
@@ -277,11 +285,11 @@
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
- exit 1
+ exit $?
fi
;;
- makeinfo)
+ makeinfo*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -310,7 +318,7 @@
touch $file
;;
- tar)
+ tar*)
shift
# We have already tried tar in the generic part.
@@ -363,5 +371,6 @@
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pixman-0.17.14/pixman/pixman-version.h new/pixman-0.18.0/pixman/pixman-version.h
--- old/pixman-0.17.14/pixman/pixman-version.h 2010-03-23 21:52:26.000000000 +0100
+++ new/pixman-0.18.0/pixman/pixman-version.h 2010-04-01 11:24:11.000000000 +0200
@@ -32,10 +32,10 @@
#endif
#define PIXMAN_VERSION_MAJOR 0
-#define PIXMAN_VERSION_MINOR 17
-#define PIXMAN_VERSION_MICRO 14
+#define PIXMAN_VERSION_MINOR 18
+#define PIXMAN_VERSION_MICRO 0
-#define PIXMAN_VERSION_STRING "0.17.14"
+#define PIXMAN_VERSION_STRING "0.18.0"
#define PIXMAN_VERSION_ENCODE(major, minor, micro) ( \
((major) * 10000) \
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org