Hello community,
here is the log from the commit of package yast2-live-installer for openSUSE:Factory
checked in at Mon Aug 10 23:12:22 CEST 2009.
--------
--- yast2-live-installer/yast2-live-installer.changes 2009-06-11 13:56:16.000000000 +0200
+++ yast2-live-installer/yast2-live-installer.changes 2009-08-10 11:46:11.000000000 +0200
@@ -1,0 +2,13 @@
+Mon Aug 10 11:23:35 CEST 2009 - jsrain@suse.cz
+
+- adapted to changes in Keyboard,ycp (bnc#529175)
+- 2.18.4
+
+-------------------------------------------------------------------
+Fri Aug 7 11:30:31 CEST 2009 - jsrain@suse.cz
+
+- use separate control file if present
+ (/etc/YaST2/control-live.xml)
+- 2.18.3
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
yast2-live-installer-2.18.2.tar.bz2
New:
----
yast2-live-installer-2.18.4.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-live-installer.spec ++++++
--- /var/tmp/diff_new_pack.iXQken/_old 2009-08-10 23:10:37.000000000 +0200
+++ /var/tmp/diff_new_pack.iXQken/_new 2009-08-10 23:10:37.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-live-installer (Version 2.18.2)
+# spec file for package yast2-live-installer (Version 2.18.4)
#
# Copyright (c) 2009 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -19,13 +19,13 @@
Name: yast2-live-installer
-Version: 2.18.2
+Version: 2.18.4
Release: 1
-License: GPL v2 or later
-Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-live-installer-2.18.2.tar.bz2
+Source0: yast2-live-installer-2.18.4.tar.bz2
Prefix: /usr
+Group: System/YaST
+License: GPL v2 or later
# Internet and InternetDevices
Requires: yast2 >= 2.16.6
Requires: yast2-network >= 2.16.6
@@ -41,14 +41,8 @@
This package contains the YaST component to deploy a live media to the
hard disk of the computer.
-
-
-Authors:
---------
- Jiri Srain
-
%prep
-%setup -n yast2-live-installer-2.18.2
+%setup -n yast2-live-installer-2.18.4
%build
%{prefix}/bin/y2tool y2autoconf
@@ -58,7 +52,9 @@
export CXXFLAGS="$RPM_OPT_FLAGS -DNDEBUG"
%{?suse_update_config:%{suse_update_config -f}}
./configure --libdir=%{_libdir} --prefix=%{prefix} --mandir=%{_mandir}
-make %{?jobs:-j%jobs}
+# V=1: verbose build in case we used AM_SILENT_RULES(yes)
+# so that RPM_OPT_FLAGS check works
+make %{?jobs:-j%jobs} V=1
%install
make install DESTDIR="$RPM_BUILD_ROOT"
++++++ yast2-live-installer-2.18.2.tar.bz2 -> yast2-live-installer-2.18.4.tar.bz2 ++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/VERSION new/yast2-live-installer-2.18.4/VERSION
--- old/yast2-live-installer-2.18.2/VERSION 2009-06-11 13:40:35.000000000 +0200
+++ new/yast2-live-installer-2.18.4/VERSION 2009-08-10 11:23:59.000000000 +0200
@@ -1 +1 @@
-2.18.2
+2.18.4
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/autodocs-ycp.ami new/yast2-live-installer-2.18.4/autodocs-ycp.ami
--- old/yast2-live-installer-2.18.2/autodocs-ycp.ami 2009-06-11 13:55:39.000000000 +0200
+++ new/yast2-live-installer-2.18.4/autodocs-ycp.ami 2009-08-10 11:40:19.000000000 +0200
@@ -1,5 +1,5 @@
# -*- makefile -*- Automake include file
-# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $
+# $Id: autodocs-ycp.ami 57644 2009-06-19 08:38:11Z mvidner $
# Builds source documentation for YCP sources
# Uses ycpdoc
@@ -8,20 +8,25 @@
# Optional - the default is $(srcdir)/../../src/*.ycp
# AUTODOCS_PM: Files that the perl autodocs is built from
# Optional - the default is $(srcdir)/../../src/*.pm
+# AUTODOCS_SUBDIR: To install the result to $(docdir)/SUBDIR/autodocs
+# Optional - the default is no subdir, $(docdir)/autodocs
+# AUTODOCS_STRIP: Strip it from filenames. The remaining / are replaced by __
+# Optional - the default is $(srcdir)/../../src
-htmldir = $(docdir)/autodocs
+htmldir = $(docdir)/$(AUTODOCS_SUBDIR)/autodocs
-html_DATA = index.html $(wildcard *.html)
+html_DATA = index.html $(filter-out index.html, $(wildcard *.html))
CLEANFILES = $(html_DATA) pod2htm*.tmp
AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp)
AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm)
+AUTODOCS_STRIP ?= $(srcdir)/../../src
index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM)
#including *.pm, for the index
- ${YCPDOC} -d. $^
+ ${YCPDOC} -d. -s$(AUTODOCS_STRIP) $(AUTODOCS_YCP)
for i in $(AUTODOCS_PM); do \
- b=`basename $$i`; b=$${b%.pm}; \
+ b=$${i##$(AUTODOCS_STRIP)}; b=$${b#/}; b=$${b//\//__}; b=$${b%.pm}; \
pod2html --title=$$b --infile=$$i --outfile=$$b.html; \
- echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \
+ echo "<a href='$$b.html'>$${b/__/::}</a>" > $$b.mod.html; \
done
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/configure new/yast2-live-installer-2.18.4/configure
--- old/yast2-live-installer-2.18.2/configure 2009-06-11 13:55:42.000000000 +0200
+++ new/yast2-live-installer-2.18.4/configure 2009-08-10 11:40:25.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for yast2-live-installer 2.18.2.
+# Generated by GNU Autoconf 2.63 for yast2-live-installer 2.18.4.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -596,8 +596,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-live-installer'
PACKAGE_TARNAME='yast2-live-installer'
-PACKAGE_VERSION='2.18.2'
-PACKAGE_STRING='yast2-live-installer 2.18.2'
+PACKAGE_VERSION='2.18.4'
+PACKAGE_STRING='yast2-live-installer 2.18.4'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -1276,7 +1276,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-live-installer 2.18.2 to adapt to many kinds of systems.
+\`configure' configures yast2-live-installer 2.18.4 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1348,7 +1348,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-live-installer 2.18.2:";;
+ short | recursive ) echo "Configuration of yast2-live-installer 2.18.4:";;
esac
cat <<\_ACEOF
@@ -1428,7 +1428,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-yast2-live-installer configure 2.18.2
+yast2-live-installer configure 2.18.4
generated by GNU Autoconf 2.63
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1442,7 +1442,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-live-installer $as_me 2.18.2, which was
+It was created by yast2-live-installer $as_me 2.18.4, which was
generated by GNU Autoconf 2.63. Invocation command line was
$ $0 $@
@@ -2289,7 +2289,7 @@
# Define the identity of the package.
PACKAGE='yast2-live-installer'
- VERSION='2.18.2'
+ VERSION='2.18.4'
cat >>confdefs.h <<_ACEOF
@@ -2513,7 +2513,7 @@
-VERSION="2.18.2"
+VERSION="2.18.4"
RPMNAME="yast2-live-installer"
MAINTAINER="Jiri Srain "
@@ -3547,7 +3547,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by yast2-live-installer $as_me 2.18.2, which was
+This file was extended by yast2-live-installer $as_me 2.18.4, which was
generated by GNU Autoconf 2.63. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -3597,7 +3597,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_version="\\
-yast2-live-installer config.status 2.18.2
+yast2-live-installer config.status 2.18.4
configured by $0, generated by GNU Autoconf 2.63,
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/configure.in new/yast2-live-installer-2.18.4/configure.in
--- old/yast2-live-installer-2.18.2/configure.in 2009-06-11 13:55:39.000000000 +0200
+++ new/yast2-live-installer-2.18.4/configure.in 2009-08-10 11:40:19.000000000 +0200
@@ -1,9 +1,9 @@
dnl configure.in for yast2-live-installer
dnl
-dnl -- This file is generated by y2autoconf 2.18.5 - DO NOT EDIT! --
+dnl -- This file is generated by y2autoconf 2.18.9 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-live-installer, 2.18.2, http://bugs.opensuse.org/, yast2-live-installer)
+AC_INIT(yast2-live-installer, 2.18.4, http://bugs.opensuse.org/, yast2-live-installer)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.18.2"
+VERSION="2.18.4"
RPMNAME="yast2-live-installer"
MAINTAINER="Jiri Srain "
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/doc/autodocs/Makefile.in new/yast2-live-installer-2.18.4/doc/autodocs/Makefile.in
--- old/yast2-live-installer-2.18.2/doc/autodocs/Makefile.in 2009-06-11 13:55:43.000000000 +0200
+++ new/yast2-live-installer-2.18.4/doc/autodocs/Makefile.in 2009-08-10 11:40:26.000000000 +0200
@@ -17,7 +17,7 @@
# Makefile.am for live-installer/doc/autodocs
# -*- makefile -*- Automake include file
-# $Id: autodocs-ycp.ami 33394 2006-10-13 11:51:40Z mvidner $
+# $Id: autodocs-ycp.ami 57644 2009-06-19 08:38:11Z mvidner $
# Builds source documentation for YCP sources
# Uses ycpdoc
@@ -26,6 +26,10 @@
# Optional - the default is $(srcdir)/../../src/*.ycp
# AUTODOCS_PM: Files that the perl autodocs is built from
# Optional - the default is $(srcdir)/../../src/*.pm
+# AUTODOCS_SUBDIR: To install the result to $(docdir)/SUBDIR/autodocs
+# Optional - the default is no subdir, $(docdir)/autodocs
+# AUTODOCS_STRIP: Strip it from filenames. The remaining / are replaced by __
+# Optional - the default is $(srcdir)/../../src
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
@@ -144,7 +148,7 @@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
-htmldir = $(docdir)/autodocs
+htmldir = $(docdir)/$(AUTODOCS_SUBDIR)/autodocs
imagedir = @imagedir@
includedir = @includedir@
infodir = @infodir@
@@ -185,7 +189,7 @@
ydatadir = @ydatadir@
yncludedir = @yncludedir@
ystartupdir = @ystartupdir@
-html_DATA = index.html $(wildcard *.html)
+html_DATA = index.html $(filter-out index.html, $(wildcard *.html))
CLEANFILES = $(html_DATA) pod2htm*.tmp
all: all-am
@@ -371,14 +375,15 @@
AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp)
AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm)
+AUTODOCS_STRIP ?= $(srcdir)/../../src
index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM)
#including *.pm, for the index
- ${YCPDOC} -d. $^
+ ${YCPDOC} -d. -s$(AUTODOCS_STRIP) $(AUTODOCS_YCP)
for i in $(AUTODOCS_PM); do \
- b=`basename $$i`; b=$${b%.pm}; \
+ b=$${i##$(AUTODOCS_STRIP)}; b=$${b#/}; b=$${b//\//__}; b=$${b%.pm}; \
pod2html --title=$$b --infile=$$i --outfile=$$b.html; \
- echo "<a href='$$b.html'>$$b</a>" > $$b.mod.html; \
+ echo "<a href='$$b.html'>$${b/__/::}</a>" > $$b.mod.html; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/live-installer.pot new/yast2-live-installer-2.18.4/live-installer.pot
--- old/yast2-live-installer-2.18.2/live-installer.pot 2009-06-05 10:41:23.000000000 +0200
+++ new/yast2-live-installer-2.18.4/live-installer.pot 2009-08-06 09:24:38.000000000 +0200
@@ -8,7 +8,7 @@
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-05 10:41+0200\n"
+"POT-Creation-Date: 2009-08-06 09:24+0200\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME \n"
"Language-Team: LANGUAGE \n"
@@ -20,38 +20,29 @@
msgid "Software Installation"
msgstr ""
-#: src/inst_live_doit.ycp:75
+#: src/inst_live_doit.ycp:77 src/inst_live_doit.ycp:78
#, ycp-format
msgid "Copying %1..."
msgstr ""
-#. Headline for last dialog of base installation: Install LILO etc.
-#: src/inst_live_doit.ycp:110
-msgid "Copying the Live Image to Hard Disk"
-msgstr ""
-
-#: src/inst_live_doit.ycp:113
-msgid "Evaluate filesystems to copy"
-msgstr ""
-
-#: src/inst_live_doit.ycp:113
-msgid "Copy root filesystem"
+#: src/inst_live_doit.ycp:130 src/inst_live_doit.ycp:131
+msgid "Evaluating filesystems to copy..."
msgstr ""
-#: src/inst_live_doit.ycp:113
-msgid "Copy additional filesystems"
+#: src/inst_live_doit.ycp:133 src/inst_live_doit.ycp:134
+msgid "Copying root filesystem..."
msgstr ""
-#: src/inst_live_doit.ycp:121
-msgid "Evaluating filesystems to copy..."
+#: src/inst_live_doit.ycp:135
+msgid "Copying live image..."
msgstr ""
-#: src/inst_live_doit.ycp:124
-msgid "Copying root filesystem..."
+#: src/inst_live_prepareprogress.ycp:41
+msgid "Preparing disks..."
msgstr ""
-#: src/inst_live_doit.ycp:133
-msgid "Finished."
+#: src/inst_live_prepareprogress.ycp:47
+msgid "Copying Image..."
msgstr ""
#. dialog caption
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/src/live-installer.ycp new/yast2-live-installer-2.18.4/src/live-installer.ycp
--- old/yast2-live-installer-2.18.2/src/live-installer.ycp 2009-01-09 11:43:37.000000000 +0100
+++ new/yast2-live-installer-2.18.4/src/live-installer.ycp 2009-08-07 11:31:21.000000000 +0200
@@ -18,6 +18,8 @@
import "CommandLine";
import "Popup";
+ string live_control_file = "/etc/YaST2/control-live.xml";
+
// Bugzilla #269890, CommanLine "support"
// argmap is only a map, CommandLine uses string parameters
if (size (WFM::Args()) > 0) {
@@ -124,6 +126,7 @@
Stage::Set ("initial");
Storage::InitLibstorage (false);
+ ProductControl::custom_control_file = live_control_file;
if (!ProductControl::Init())
y2error("control file %1 not found", ProductControl::custom_control_file );
ProductControl::AddWizardSteps(stage_mode);
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/src/live_save_config_finish.ycp new/yast2-live-installer-2.18.4/src/live_save_config_finish.ycp
--- old/yast2-live-installer-2.18.2/src/live_save_config_finish.ycp 2008-04-04 13:13:35.000000000 +0200
+++ new/yast2-live-installer-2.18.4/src/live_save_config_finish.ycp 2009-08-10 11:14:27.000000000 +0200
@@ -53,11 +53,7 @@
// progress step title
Progress::Title (_("Saving keyboard configuration..."));
- Keyboard::Save(true);
- // to save also X11 configuration
- Keyboard::xf86_update();
- // unfortunatelly it is saved to local system instead the target, therefore need to copy
- WFM::Execute (.local.bash, sformat ("/bin/cp /etc/X11/xorg.conf %1/etc/X11/xorg.conf", Installation::destdir));
+ Keyboard::Save();
Progress::NextStep ();
// progress step title
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-live-installer-2.18.2/yast2-live-installer-2.18.2/live-installer.pot new/yast2-live-installer-2.18.4/yast2-live-installer-2.18.2/live-installer.pot
--- old/yast2-live-installer-2.18.2/yast2-live-installer-2.18.2/live-installer.pot 2009-06-05 10:41:23.000000000 +0200
+++ new/yast2-live-installer-2.18.4/yast2-live-installer-2.18.2/live-installer.pot 1970-01-01 01:00:00.000000000 +0100
@@ -1,238 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR , YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2009-06-05 10:41+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME \n"
-"Language-Team: LANGUAGE \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/inst_live_add_base_repo.ycp:25 src/inst_live_sw_select.ycp:16
-msgid "Software Installation"
-msgstr ""
-
-#: src/inst_live_doit.ycp:75
-#, ycp-format
-msgid "Copying %1..."
-msgstr ""
-
-#. Headline for last dialog of base installation: Install LILO etc.
-#: src/inst_live_doit.ycp:110
-msgid "Copying the Live Image to Hard Disk"
-msgstr ""
-
-#: src/inst_live_doit.ycp:113
-msgid "Evaluate filesystems to copy"
-msgstr ""
-
-#: src/inst_live_doit.ycp:113
-msgid "Copy root filesystem"
-msgstr ""
-
-#: src/inst_live_doit.ycp:113
-msgid "Copy additional filesystems"
-msgstr ""
-
-#: src/inst_live_doit.ycp:121
-msgid "Evaluating filesystems to copy..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:124
-msgid "Copying root filesystem..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:133
-msgid "Finished."
-msgstr ""
-
-#. dialog caption
-#: src/inst_live_simple_proposal.ycp:22 src/inst_live_simple_proposal.ycp:155
-msgid "Installation settings"
-msgstr ""
-
-#. label
-#: src/inst_live_simple_proposal.ycp:24
-msgid "Analyzing the system..."
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:84
-#, ycp-format
-msgid "Use %1%% of disk %2 for Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:88
-#, ycp-format
-msgid "Do not use disk %1"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:92
-msgid "Partitioning"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:109
-msgid "System start-up"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:111
-msgid "Ask whether to boot Linux or existing system"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:112
-msgid "Boot only Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:113
-#, ycp-format
-msgid "System start time-out: %1 seconds"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:119
-msgid "Keyboard"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:126
-msgid "Time Zone"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:136
-msgid "Change Installation Settings"
-msgstr ""
-
-#. help text 1/3
-#: src/inst_live_simple_proposal.ycp:141
-msgid ""
-"<p>\n"
-"Use <b>Accept</b> to perform a new installation with the values displayed.</p>"
-msgstr ""
-
-#. help text 2/3
-#: src/inst_live_simple_proposal.ycp:144
-msgid ""
-"<p>\n"
-"To change the values click the respective headline\n"
-"or select <b>Change Installation Settings</b></p>"
-msgstr ""
-
-#. help text 3/3
-#: src/inst_live_simple_proposal.ycp:148
-msgid ""
-"<p>\n"
-"Your hard disk has not been modified, you can still safely abort.\n"
-"</p>"
-msgstr ""
-
-#. help text 1/1
-#: src/inst_live_welcome.ycp:14
-msgid ""
-"<p>Welcome to the &product; installation.\n"
-"Press <b>Next</p> to run the installation wizard.</p>"
-msgstr ""
-
-#. dialog caption, %1 is product name (typically openSUSE)
-#: src/inst_live_welcome.ycp:19
-#, ycp-format
-msgid "Welcome to %1 installation"
-msgstr ""
-
-#. wellcome label, %1 is product name
-#: src/inst_live_welcome.ycp:21
-#, ycp-format
-msgid ""
-"Your %1 will be installed quickly\n"
-"and easily in a few steps.\n"
-"You will only have to answer some questions."
-msgstr ""
-
-#. TRANSLATORS: error message - the module does not provide command line interface
-#: src/live-installer.ycp:27
-msgid "There is no user interface available for this module."
-msgstr ""
-
-#. pop-up, %1 is memory size, currently hardcoded "1 GB"
-#: src/live-installer.ycp:40
-#, ycp-format
-msgid ""
-"Your computer has less than %1 of memory. This may not be\n"
-"sufficient for the live installation, especially when installing\n"
-"while running other applications.\n"
-"Before continuing, finish all running applications."
-msgstr ""
-
-#. continue/cancel pop-up
-#: src/live-installer.ycp:79
-msgid ""
-"YaST detected a mounted removable media. YaST cannot install\n"
-"the system on media which is mounted.\n"
-"To install the system on these media, unmount them first."
-msgstr ""
-
-#. continue-cancel popup
-#: src/live-installer.ycp:107
-msgid ""
-"openSUSE installer detected DMRAID array.\n"
-"It is not supported by the openSUSE live installer.\n"
-"Continuing the installation may cause data loss."
-msgstr ""
-
-#. popup dialog, text followed by 'Reboot Now' and 'Reboot Later' buttons
-#: src/live-installer.ycp:153
-msgid ""
-"The computer needs to be rebooted without the Live CD in the\n"
-"drive to finish the installation. Either YaST can reboot\n"
-"now or you can reboot any time later.\n"
-"\n"
-"Note that if the Live CD is not ejected, you can either eject\n"
-"it after the Live system shuts down or select \"Hard Disk\"\n"
-"in the boot menu of the Live CD."
-msgstr ""
-
-#. push button
-#: src/live-installer.ycp:161
-msgid "Reboot &Now"
-msgstr ""
-
-#: src/live-installer.ycp:161
-msgid "Reboot &Later"
-msgstr ""
-
-#. error report
-#: src/live-installer.ycp:176
-msgid ""
-"Failed to restart the computer.\n"
-"Reboot it manually. You may even need to push the\n"
-"'Reset' button to restart it."
-msgstr ""
-
-#. progress step title
-#: src/live_copy_files_finish.ycp:51
-msgid "Copying files to installed system..."
-msgstr ""
-
-#. progress step title
-#: src/live_runme_at_boot_finish.ycp:45
-msgid "Writing YaST Configuration..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:50
-msgid "Saving language..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:55
-msgid "Saving keyboard configuration..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:64
-msgid "Saving time zone..."
-msgstr ""
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org