Hello community,
here is the log from the commit of package yast2-network for openSUSE:Factory
checked in at Mon Jun 29 17:00:36 CEST 2009.
--------
--- yast2-network/yast2-network.changes 2009-06-01 12:04:03.000000000 +0200
+++ yast2-network/yast2-network.changes 2009-06-19 12:03:03.000000000 +0200
@@ -1,0 +2,5 @@
+Fri Jun 19 10:56:49 CEST 2009 - mvidner@suse.cz
+
+- Using autodocs-ycp.ami, which contains a fix for automake 1.11.
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-network.spec ++++++
--- /var/tmp/diff_new_pack.b17428/_old 2009-06-29 17:00:19.000000000 +0200
+++ /var/tmp/diff_new_pack.b17428/_new 2009-06-29 17:00:19.000000000 +0200
@@ -20,12 +20,12 @@
Name: yast2-network
Version: 2.18.35
-Release: 1
-License: GPL v2 or later
-Group: System/YaST
+Release: 2
BuildRoot: %{_tmppath}/%{name}-%{version}-build
Source0: yast2-network-2.18.35.tar.bz2
Prefix: /usr
+Group: System/YaST
+License: GPL v2 or later
# should be required by devtools
BuildRequires: perl-XML-Writer pkgconfig rpm
BuildRequires: update-desktop-files
@@ -62,21 +62,9 @@
%description
This package contains the YaST2 component for network configuration.
-
-
-Authors:
---------
- Michal Svec
-
%description devel-doc
This package contains autogenerated documentation for yast2-network
-
-
-Authors:
---------
- Michal Svec
-
%prep
%setup -n yast2-network-2.18.35
@@ -88,7 +76,9 @@
export CXXFLAGS="$RPM_OPT_FLAGS -DNDEBUG"
%{?suse_update_config:%{suse_update_config -f}}
./configure --libdir=%{_libdir} --prefix=%{prefix} --mandir=%{_mandir}
-make %{?jobs:-j%jobs}
+# V=1: verbose build in case we used AM_SILENT_RULES(yes)
+# so that RPM_OPT_FLAGS check works
+make %{?jobs:-j%jobs} V=1
%install
make install DESTDIR="$RPM_BUILD_ROOT"
++++++ yast2-network-2.18.35.tar.bz2 ++++++
++++ 13414 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-2.18.35/autodocs-ycp.ami new/yast2-network-2.18.35/autodocs-ycp.ami
--- old/yast2-network-2.18.35/autodocs-ycp.ami 1970-01-01 01:00:00.000000000 +0100
+++ new/yast2-network-2.18.35/autodocs-ycp.ami 2009-06-23 07:28:43.000000000 +0200
@@ -0,0 +1,32 @@
+# -*- makefile -*- Automake include file
+# $Id: autodocs-ycp.ami 57644 2009-06-19 08:38:11Z mvidner $
+
+# Builds source documentation for YCP sources
+# Uses ycpdoc
+# PARAMETERS:
+# AUTODOCS_YCP: Files that the ycp autodocs is built from
+# Optional - the default is $(srcdir)/../../src/*.ycp
+# AUTODOCS_PM: Files that the perl autodocs is built from
+# Optional - the default is $(srcdir)/../../src/*.pm
+# AUTODOCS_SUBDIR: To install the result to $(docdir)/SUBDIR/autodocs
+# Optional - the default is no subdir, $(docdir)/autodocs
+# AUTODOCS_STRIP: Strip it from filenames. The remaining / are replaced by __
+# Optional - the default is $(srcdir)/../../src
+
+htmldir = $(docdir)/$(AUTODOCS_SUBDIR)/autodocs
+
+html_DATA = index.html $(filter-out index.html, $(wildcard *.html))
+CLEANFILES = $(html_DATA) pod2htm*.tmp
+
+AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp)
+AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm)
+AUTODOCS_STRIP ?= $(srcdir)/../../src
+
+index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM)
+#including *.pm, for the index
+ ${YCPDOC} -d. -s$(AUTODOCS_STRIP) $(AUTODOCS_YCP)
+ for i in $(AUTODOCS_PM); do \
+ b=$${i##$(AUTODOCS_STRIP)}; b=$${b#/}; b=$${b//\//__}; b=$${b%.pm}; \
+ pod2html --title=$$b --infile=$$i --outfile=$$b.html; \
+ echo "<a href='$$b.html'>$${b/__/::}</a>" > $$b.mod.html; \
+ done
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-2.18.35/configure.in new/yast2-network-2.18.35/configure.in
--- old/yast2-network-2.18.35/configure.in 2009-06-01 08:57:08.000000000 +0200
+++ new/yast2-network-2.18.35/configure.in 2009-06-23 07:28:43.000000000 +0200
@@ -1,9 +1,9 @@
dnl configure.in for yast2-network
dnl
-dnl -- This file is generated by y2autoconf 2.18.5 - DO NOT EDIT! --
+dnl -- This file is generated by y2autoconf 2.18.8 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-network, 2.18.34, http://bugs.opensuse.org/, yast2-network)
+AC_INIT(yast2-network, 2.18.35, http://bugs.opensuse.org/, yast2-network)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -18,7 +18,7 @@
AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
dnl Important YaST2 variables
-VERSION="2.18.34"
+VERSION="2.18.35"
RPMNAME="yast2-network"
MAINTAINER="Michal Zugec "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-2.18.35/doc/autodocs/Makefile.am new/yast2-network-2.18.35/doc/autodocs/Makefile.am
--- old/yast2-network-2.18.35/doc/autodocs/Makefile.am 2008-01-24 14:41:26.000000000 +0100
+++ new/yast2-network-2.18.35/doc/autodocs/Makefile.am 2009-06-19 10:58:03.000000000 +0200
@@ -1,11 +1,4 @@
-#
# Makefile.am for YCP module .../doc/autodocs
-#
-htmldir = @docdir@/autodocs
-
-html_DATA = index.html $(wildcard *.html)
-CLEANFILES = $(html_DATA)
-
-index.html: $(srcdir)/../../src/*/*.ycp
- ${YCPDOC} -d. -s$(srcdir)/../../src/ $(srcdir)/../../src/*/*.ycp
+AUTODOCS_YCP = $(srcdir)/../../src/*/*.ycp
+include $(top_srcdir)/autodocs-ycp.ami
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-2.18.35/doc/Makefile.am new/yast2-network-2.18.35/doc/Makefile.am
--- old/yast2-network-2.18.35/doc/Makefile.am 2008-01-24 14:41:26.000000000 +0100
+++ new/yast2-network-2.18.35/doc/Makefile.am 2009-06-23 07:28:30.000000000 +0200
@@ -7,7 +7,9 @@
htmldir = $(docdir)
doc_DATA = autoinst
-html_DATA = todo.html $(wildcard *.html)
+html_DATA = $(wildcard *.html)
+
+all-local: todo.html
todo.html: Todo.txt
@( \
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-2.18.35/doc/todo.html new/yast2-network-2.18.35/doc/todo.html
--- old/yast2-network-2.18.35/doc/todo.html 2008-06-02 09:16:08.000000000 +0200
+++ new/yast2-network-2.18.35/doc/todo.html 1970-01-01 01:00:00.000000000 +0100
@@ -1,254 +0,0 @@
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html><head>
-<title>Network Configuration: Things To Do</title>
-</head><body bgcolor=#ffffff>
-
-<!-- Author: Michal Svec <msvec@suse.cz> -->
-<!-- $Id: skel.html 18222 2004-07-27 09:54:17Z msvec $ -->
-<a name="top"><p>
-<h1>Network Configuration: Things To Do</h1>
-<hr>
-
-<!-- ##BODY## -->
-
-<pre>
-
-# $Id: Todo.txt 18259 2004-07-28 09:54:08Z msvec $
-
-<hr>
-<!--<h2>Bugs </h2>-->
-
-<h2>Bugs:</h2>
-- KInternet: better helptext (configured + kinternet, cinternet)
-- ISDN cleanup (adapt to new sources, better sysconfig) [ISDN]
-
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=35935">#35935</a> nor yast2 asks for internet test although network config skipped
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=37864">#37864</a> nor kinternet not started after dsl config
-
-- name resolving doesn't work without /etc/resolv.conf (ResolveIP, ag_hostnames)
-
-- cleanup ifcfg and hwcfg naming
-- cleanup NetworkModules
-- fix (or delete) all FIXMEs
-
-<h2>in-progress:</h2>
-- [snwint] ifcfg-usb-usb: detected devices (manual adding done, detected missing) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=22739">#22739</a>)
-- [zoz] routing: restart only routing (<a href="http://bugzilla.suse.de/show_bug.cgi?id=33025">#33025</a>)
-
-<hr>
-<!--<h2>Features </h2>-->
-
-<h2>Small Features:</h2>
-- host: add (update) all hosts in the local network
-- host: scan for hosts on the local network [Add]
-- host: show system hosts checkbox (like users have)
-- modem: check existence of the modem device in ModemDialog
-- routing: summary: print other routes in nice form
-- package: include all agents (ag_xauth, ag_resolver, ag_hostnames, ...)
-- routing: DHCLIENT_SET_DEFAULT_ROUTE (similar to RESOLV_CONF, HOSTNAME)
-
-<h2>Large Features:</h2>
-- lan: new UI (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29721">#29721</a>, see also <a href="http://bugzilla.suse.de/show_bug.cgi?id=33801">#33801</a>) [sigi]
-- proxy: use immediately (<a href="http://bugzilla.suse.de/show_bug.cgi?id=23728">#23728</a>), enhance other programs
-- new: IPv6 support (tunnels)
-- lan: check IPv6 support is really functional (all fields)
-- new: cable connection (slip, plip, ppp, usb)
-- hardware: wireless connection (irda, bluetooth) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=35747">#35747</a>)
-- support custom provider from INS file (<a href="http://bugzilla.suse.de/show_bug.cgi?id=25774">#25774</a>)
-- lan: install required packages: dhcpcd|sysconfig|hotplug|wireless-tools (only if needed, before Write?)
-- dialup: don't always ask for the mail config (<a href="http://bugzilla.suse.de/show_bug.cgi?id=31472">#31472</a>)
-- lan: ask for the mail config?
-- lan: allow configuring a net interface without an IP address (<a href="http://bugzilla.suse.de/show_bug.cgi?id=33801">#33801</a>)
-- routing: other fields (see routes(5))
-- modem: speaker volume as combo (or better as slider)
-- not only lan: temporary interface disable (<a href="http://bugzilla.suse.de/show_bug.cgi?id=24926">#24926</a>)
-- lan: myrinet: check for driver presence [warning + info]
-
-<hr>
-<!--<h2>Old Stuff </h2>-->
-
-- lan: netcards without a driver (what to do on s390?, warn?) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29296">#29296</a>)
-- lan: compiled in kernel drivers (#???)
- offer them besides modularized drivers? src/lan/cards.ycp?
-
-<h2>Improvements:</h2>
-- dns: two resolv.conf scrconfs (resolv.conf.saved.by.dhcpcd, <a href="http://bugzilla.suse.de/show_bug.cgi?id=38834">#38834</a>) XXX?
-- lan: check link presence (see sysconfig.rpm how is it done, or was it RH?)
-- routing: check already present default route (partially <a href="http://bugzilla.suse.de/show_bug.cgi?id=11132">#11132</a>c26)
-- routines: check for yast2-mail presence
-- provider: offer to delete provider after device delete if not used (<a href="http://bugzilla.suse.de/show_bug.cgi?id=16094">#16094</a>)
-- provider: delete default route if removed (<a href="http://bugzilla.suse.de/show_bug.cgi?id=10739">#10739</a>)
-- lan: warn before the network restart (<a href="http://bugzilla.suse.de/show_bug.cgi?id=27137">#27137</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=19851">#19851</a>) [WARN]
-- lan: yp configuration failed (<a href="http://bugzilla.suse.de/show_bug.cgi?id=25506">#25506</a>)
- ask if network should be restarted
-- dns: better "DNS and Hostname" and "Hosts" titles (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29722">#29722</a>)
-- dns: better message for broken fields (eg. domain) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=22802">#22802</a>)
-- lan: ssh installation (install.inf format) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=24836">#24836</a>)
- duplicate Alias lines; maybe not necessary, review <a href="http://bugzilla.suse.de/show_bug.cgi?id=22444">#22444</a>
-- dialup: mail question only if new device was added
- yast ui config XXX?
-
-<h2>Enhancements:</h2>
-- detection (netprobe, dhcpcd) <a href="http://bugzilla.suse.de/show_bug.cgi?id=15489">#15489</a> (see also <a href="http://bugzilla.suse.de/show_bug.cgi?id=7287">#7287</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=13200">#13200</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=9951">#9951</a>)
- <a href="http://bugzilla.suse.de/show_bug.cgi?id=7287">#7287</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=13200">#13200</a> are dups of <a href="http://bugzilla.suse.de/show_bug.cgi?id=16471">#16471</a>: take info from linuxrc
-- modem: pap|chap secrets writing (isdn may do it already), not sure if it's useful
-- providers: no-global-values (ini-agent parameter, ease of use: flat(<a href="http://bugzilla.suse.de/show_bug.cgi?id=21867">#21867</a>)?)
-- providers: -> HWDB-NG
-- all: edit without restart (reload)
-- device: use map instead of variables (-> fill all variables)
-- package: require yast2-language, yast2-mail, ... (maybe do that at runtime)
-- feature: IP-masquerading (<a href="http://bugzilla.suse.de/show_bug.cgi?id=16131">#16131</a>), is already in the firewall
-- routing: default route without GW (<a href="http://bugzilla.suse.de/show_bug.cgi?id=23977">#23977</a>)
-- dsl: flat rate (<a href="http://bugzilla.suse.de/show_bug.cgi?id=27840">#27840</a>)
-- improve modules.conf options merging (maybe obsolete with 2.6) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29995">#29995</a>)
-- make DHCP options iface-local (questionable) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=30476">#30476</a>)
-- edit dsl HW goes through provider again (default provider?) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=24000">#24000</a>)
-- allow to change the netcard type (for a broken detection) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=30890">#30890</a>)
-- skip detect check box (general yast2 feature) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=31478">#31478</a>)
-- installation: better network configuration (inst_netcfg, create_interfaces)
-- host: drop oldhostentry file
-- host: better deleted hostnames handling
-
-<hr>
-<!--<h2>New Bugs </h2>-->
-
-<h2>New in Bugzilla:</h2>
-
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=33071">#33071</a> enh provide a per interface routing configuration
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=33649">#33649</a> cri yast2 ISDN module always activates personal firewall
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=34626">#34626</a> enh Allow giving a net interface an arbitrary name
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=35221">#35221</a> nor LATER Better behavior with multiple dhcp clients
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=35638">#35638</a> min On Abort, ask only if there have been any changes
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=35671">#35671</a> min Yast2 deletes hostname aliases, if more than one are present
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=35955">#35955</a> min LATER Obsolete NETWORK, BROADCAST, NETMASK, UNIQUE in ifcfg
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=37520">#37520</a> enh LATER Let user identify ifcfg by MAC, bus id, vpid...
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=38213">#38213</a> min YaST network forgets configuration name proposal
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=38031">#38031</a> nor Changing network environment causes resolver problems
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=38135">#38135</a> min after deleting the only configured modem, yast2-mail is run
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=38746">#38746</a> nor dsl config is not working with two network cards
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=39027">#39027</a> min LATER "Back" button is interpreted as "Abort"
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=40012">#40012</a> enh LATER Allow editing the whole resolver search list
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=40254">#40254</a> nor LATER Allow choosing the encoding for passwords
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=40458">#40458</a> nor LATER Improve VNC Remote Administration
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=40861">#40861</a> enh LATER Add "Test connection" button to proxy etc. config
-<a href="http://bugzilla.suse.de/show_bug.cgi?id=41204">#41204</a> enh LATER unconnected network card is assumed to be connected
-
-<hr>
-<!--<h2>Documentation </h2>-->
-
-<h2>Documentation:</h2>
-- example dhcpcd-eth0.info
-- example intstall.inf's
-- Net-HOWTO link
-- s390 devices (see bellow, also from mails)
-- overall device overview (see bellow, also required data like IP, RI, NM)
-- UIMODE: link to autodocs
-- doc: adding network device mini-howto: grep for "escon" for example
-- doc: include public_html/network, dia, ...
-
-<h2>New device type:</h2>
-- lan/cards.ycp add type cards (at least one entry)
-- lan/hardware.ycp update "device_types" list
-- modules/NetworkDevices.ycp update "netcard" list
-- routines/complex.ycp add "device_name" to CheckEmptyName
-- routines/hardware.ycp update ControllerType (detection)
-- routines/summary.ycp add "device_type" to DeviceType
-
-<h2>Debug (bugzilla):</h2>
-- 'hwinfo --all --log hwinfo.log'
-- /etc/sysconfig/hardware/hwcfg-*
-- /etc/sysconfig/network/ifcfg-*
-- /etc/sysconfig/network/ifroute-*
-- /var/lib/YaST2/install.inf
-- /var/log/YaST2/y2log*
-
-- /etc/sysconfig/network/providers/* [dialup problems]
-
-- /etc/sysconfig/network/config
-- /etc/sysconfig/network/dhcp
-- /etc/sysconfig/network/routes
-
-- /etc/resolv.conf [DNS problems]
-
-- /etc/modprobe.conf
-- /etc/modprobe.conf.local
-- /etc/modprobe.d/*
-
-- 'ip a'
-- /var/log/messages
-
-<hr>
-<!--<h2>Details for some of the above </h2>-->
-
-<h2>ISDN:</h2>
-- code cleanup (use yast2-network structure: Provider, devices, ...)
-- UI cleanup (http://w3.suse.de/~sigi/yast2/modules/isdn/81isdn/isdn81_improvement_it01.ht...)
-- isdn: start mail after config (<a href="http://bugzilla.suse.de/show_bug.cgi?id=18256">#18256</a>)
-
-<h2>WARN:</h2>
-- <a href="http://bugzilla.suse.de/show_bug.cgi?id=19851">#19851</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=27137">#27137</a>
-- warn before rcnetwork restart -> RestartNetwork() || StopNetwork();
-- see routines/runtime.ycp:RunningLocal()
-
-<hr>
-<!--<h2>Ancient Stuff </h2>-->
-
-<h2>TO-SORT:</h2>
-
-- all: use rcnetwork reload (but probably only in some cases, things like
- remove 2 eth cards and add them in a different order won't work due to
- the kernel modules not being unloaded)
- * "rcnetwork reload" (if DeletedModules\!=[] "restart")
-
-- routines: -> FIREWALL=yes|no to each ifcfg-XXX <a href="http://bugzilla.suse.de/show_bug.cgi?id=18840">#18840</a> (support for modems)
-
-<hr>
-<!--<h2>Some details, other stuff, old </h2>-->
-
-<h2>DOC:</h2>
-- doc: dummy: IP/NM/BC
-- doc: irlan: IP/NM/BC (eth?)
-- doc: irnet: IP/RI (?)
-- doc: plip: IP/RI (Parallel Line IP)
-- doc: slip: IP/RI (Serial Line IP, obsoleted by PPP)
-- doc: ppp: IP/RI (Serial Point-To-Point protocol)
-
-<h2>UI proposal:</h2>
-- detected
-- choose your card (current list)
-- hw params only (current manual)
-
-<h2>Hardware:</h2>
-- usb: network cabel, ethernet card, TR card, ISDN card, modem
-- pcmcia: ethernet card, TR card, ISDN card, modem
-- wireless network cards
-- fddi card
-
-- make device optional in routes agent
-- DefaultDevice(ip)
- check all PPP connections (REMOTEIP)
- other devices
- - take IP
- - if(network(IP) == network(ip)) return x;
-- compare with old lan
-- where is this used?
-
-<h2>Modules:</h2>
-- see the "*ISDN*" paper
-
-MODULES=$[]; -> Lan.ycp
-DELETED=[]; -> Lan.ycp
-ReadModules(); -> M
-WriteModules(); <- D,M
-Select: C,M -> global vars
-AddEdit: global vars -> C,M
-Delete: global vars -> C,M,D
-
-<hr>
-<!--<h2>EOF :-) </h2>-->
-
-</pre>
-
-<!-- ##BODY## -->
-
-</body></html>
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org