Hello community,
here is the log from the commit of package pam-config
checked in at Mon Dec 1 18:04:12 CET 2008.
--------
--- pam-config/pam-config.changes 2008-11-21 13:27:04.000000000 +0100
+++ /mounts/work_src_done/STABLE/pam-config/pam-config.changes 2008-12-01 14:57:33.168931000 +0100
@@ -1,0 +2,8 @@
+Mon Dec 1 14:56:56 CET 2008 - mc@suse.de
+
+- Version 0.68
+ * fix linking; accept relative links (bnc#450019)
+ * fix some testcases
+ * Update translations.
+
+-------------------------------------------------------------------
calling whatdependson for head-i586
Old:
----
pam-config-0.67.tar.bz2
New:
----
pam-config-0.68.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ pam-config.spec ++++++
--- /var/tmp/diff_new_pack.b27783/_old 2008-12-01 18:03:09.000000000 +0100
+++ /var/tmp/diff_new_pack.b27783/_new 2008-12-01 18:03:09.000000000 +0100
@@ -1,5 +1,5 @@
#
-# spec file for package pam-config (Version 0.67)
+# spec file for package pam-config (Version 0.68)
#
# Copyright (c) 2008 SUSE LINUX Products GmbH, Nuernberg, Germany.
#
@@ -20,7 +20,7 @@
Name: pam-config
Summary: Modify common PAM configuration files
-Version: 0.67
+Version: 0.68
Release: 1
License: GPL v2 only
AutoReqProv: on
@@ -95,6 +95,11 @@
%ghost %config %{_sysconfdir}/pam.d/common-session-pc
%changelog
+* Mon Dec 01 2008 mc@suse.de
+- Version 0.68
+ * fix linking; accept relative links (bnc#450019)
+ * fix some testcases
+ * Update translations.
* Fri Nov 21 2008 kukuk@suse.de
- Version 0.67
* Update translations.
++++++ pam-config-0.67.tar.bz2 -> pam-config-0.68.tar.bz2 ++++++
++++ 1648 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/ChangeLog new/pam-config-0.68/ChangeLog
--- old/pam-config-0.67/ChangeLog 2008-11-21 13:11:52.000000000 +0100
+++ new/pam-config-0.68/ChangeLog 2008-12-01 14:44:24.000000000 +0100
@@ -1,3 +1,10 @@
+2008-12-01 Michael Calmer
+
+ * release version 0.68
+
+ * src/pam-config.c: fix linking; accept relative links (bnc#450019)
+ * tests/: fix some testcases
+
2008-11-21 Thorsten Kukuk
* release version 0.67
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/configure.in new/pam-config-0.68/configure.in
--- old/pam-config-0.67/configure.in 2008-11-21 13:10:23.000000000 +0100
+++ new/pam-config-0.68/configure.in 2008-12-01 14:39:41.000000000 +0100
@@ -1,6 +1,6 @@
dnl Process this file with autoconf to produce a configure script.
AC_INIT(src/pam-config.c)
-AM_INIT_AUTOMAKE("pam-config", 0.67)
+AM_INIT_AUTOMAKE("pam-config", 0.68)
AM_CONFIG_HEADER(config.h)
AC_PREFIX_DEFAULT(/usr)
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/INSTALL new/pam-config-0.68/INSTALL
--- old/pam-config-0.67/INSTALL 2008-09-03 13:53:42.000000000 +0200
+++ new/pam-config-0.68/INSTALL 2007-07-18 11:26:57.000000000 +0200
@@ -1,8 +1,8 @@
Installation Instructions
*************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007 Free Software Foundation, Inc.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
@@ -10,10 +10,7 @@
Basic Installation
==================
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
+These are generic installation instructions.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
@@ -26,9 +23,9 @@
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
+the results of its tests to speed up reconfiguring. (Caching is
disabled by default to prevent problems with accidental use of stale
-cache files.
+cache files.)
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
@@ -38,17 +35,20 @@
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
2. Type `make' to compile the package.
@@ -67,9 +67,6 @@
all sorts of other programs in order to regenerate files that came
with the distribution.
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
-
Compilers and Options
=====================
@@ -81,7 +78,7 @@
by setting variables in the command line or in the environment. Here
is an example:
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
*Note Defining Variables::, for more details.
@@ -90,15 +87,17 @@
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
Installation Names
==================
@@ -191,12 +190,12 @@
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
+overridden in the site shell script). Here is a another example:
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
+ /bin/bash ./configure CONFIG_SHELL=/bin/bash
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
`configure' Invocation
======================
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/missing new/pam-config-0.68/missing
--- old/pam-config-0.67/missing 2008-09-03 13:53:42.000000000 +0200
+++ new/pam-config-0.68/missing 2007-07-18 11:26:56.000000000 +0200
@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2006-05-10.23
+scriptversion=2005-06-08.21
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard , 1996.
@@ -33,8 +33,6 @@
fi
run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -46,7 +44,7 @@
msg="missing on your system"
-case $1 in
+case "$1" in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -79,7 +77,6 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -109,7 +106,7 @@
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
-case $1 in
+case "$1" in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
@@ -138,7 +135,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case $1 in
+case "$1" in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -167,7 +164,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case $f in
+ case "$f" in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -195,8 +192,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
if test -f "$file"; then
touch $file
else
@@ -217,25 +214,25 @@
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if test ! -f y.tab.h; then
+ if [ ! -f y.tab.h ]; then
echo >y.tab.h
fi
- if test ! -f y.tab.c; then
+ if [ ! -f y.tab.c ]; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
@@ -247,18 +244,18 @@
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if test $# -ne 1; then
+ if [ $# -ne 1 ]; then
eval LASTARG="\${$#}"
- case $LASTARG in
+ case "$LASTARG" in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
+ if [ -f "$SRCFILE" ]; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if test ! -f lex.yy.c; then
+ if [ ! -f lex.yy.c ]; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
@@ -270,9 +267,11 @@
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
touch $file
else
test -z "$file" || exec >$file
@@ -290,17 +289,11 @@
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
@@ -324,13 +317,13 @@
fi
firstarg="$1"
if shift; then
- case $firstarg in
+ case "$firstarg" in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case $firstarg in
+ case "$firstarg" in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/NEWS new/pam-config-0.68/NEWS
--- old/pam-config-0.67/NEWS 2008-11-21 13:12:33.000000000 +0100
+++ new/pam-config-0.68/NEWS 2008-12-01 14:47:51.000000000 +0100
@@ -4,6 +4,10 @@
Please send bug reports, questions and suggestions to .
+Version 0.68
+* Update translations.
+* use relative links
+
Version 0.67
* Update translations.
* Add type option for pam_pwhistory.
Files old/pam-config-0.67/po/zh_CN.gmo and new/pam-config-0.68/po/zh_CN.gmo differ
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/po/zh_CN.po new/pam-config-0.68/po/zh_CN.po
--- old/pam-config-0.67/po/zh_CN.po 2008-11-21 13:09:19.000000000 +0100
+++ new/pam-config-0.68/po/zh_CN.po 2008-12-01 14:47:55.000000000 +0100
@@ -1,7 +1,7 @@
# @TITLE@
# Copyright (C) 2006, SUSE Linux GmbH, Nuremberg
-# Thruth Wang , 2007, 2008.
-# Eric Shan , 2008.
+# Thruth Wang , 2007, 2008.
+# Eric Shan , 2008.
#
# This file is distributed under the same license as @PACKAGE@ package. FIRST
#
@@ -10,8 +10,8 @@
"Project-Id-Version: @PACKAGE@\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2008-11-07 12:06+0100\n"
-"PO-Revision-Date: 2008-04-13 21:14+0800\n"
-"Last-Translator: Eric Shan \n"
+"PO-Revision-Date: 2008-12-01 01:33+0800\n"
+"Last-Translator: Thruth Wang \n"
"Language-Team: Simplified Chinese\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
@@ -88,9 +88,9 @@
msgstr "警告:未能找到 /etc/security/pam_pwcheck.conf{.rpmsave} (%m)。\n"
#: src/mod_pam_ck_connector.c:93
-#, fuzzy, c-format
+#, c-format
msgid "ERROR: Could not add pam_ck_connector.so to service '%s'"
-msgstr "错误:未能将 pam_cryptpass.so 添加到服务'%s'"
+msgstr "错误:未能将 pam_ck_connector.so 添加到服务'%s'"
#: src/mod_pam_cryptpass.c:98
#, c-format
@@ -119,9 +119,9 @@
msgstr "错误:模块 pam_thinkfinger.so 已经被启用。请先将它禁用。\n"
#: src/mod_pam_mount.c:131
-#, fuzzy, c-format
+#, c-format
msgid "ERROR: Module pam_fp.so is enabled. Disable it first.\n"
-msgstr "错误:模块 pam_thinkfinger.so 已经被启用。请先将它禁用。\n"
+msgstr "错误:模块 pam_fp.so 已经被启用。请先将它禁用。\n"
#: src/mod_pam_thinkfinger.c:91
#, c-format
@@ -147,12 +147,12 @@
"错误:pam_mount.so 被启用了。为了使用 pam_thinkfinger.so 你需要先把它禁用!\n"
#: src/mod_pam_thinkfinger.c:146
-#, fuzzy, c-format
+#, c-format
msgid ""
"ERROR: pam_fp.so is enabled. In order to use pam_thinkfinger.so you need to "
"disable it first!\n"
msgstr ""
-"错误:pam_mount.so 被启用了。为了使用 pam_thinkfinger.so 你需要先把它禁用!\n"
+"错误:pam_fp.so 被启用了。为了使用 pam_thinkfinger.so 你需要先把它禁用!\n"
#: src/pam-config.c:46
#, c-format
@@ -218,7 +218,7 @@
#: src/pam-config.c:90
msgid " --list-modules List all supported modules\n"
-msgstr ""
+msgstr " --list-modules 列出所有支持模块\n"
#: src/pam-config.c:92
msgid " --help Give this help list\n"
@@ -282,19 +282,19 @@
msgstr "警告:没有找到文件'%s',忽略备份。\n"
#: src/pam-config.c:199
-#, fuzzy, c-format
+#, c-format
msgid "WARNING: Backup file '%s' already exist. Omitting backup.\n"
-msgstr "警告:没有找到文件'%s',忽略备份。\n"
+msgstr "警告:备份文件'%s'已经存在。忽略备份。\n"
#: src/pam-config.c:202
-#, fuzzy, c-format
+#, c-format
msgid "ERROR: Cannot create backup file '%s' (%m)\n"
-msgstr "无法创建 %s 的备份文件:%m"
+msgstr "错误:无法创建的备份文件'%s' (%m)\n"
#: src/pam-config.c:206
-#, fuzzy, c-format
+#, c-format
msgid "ERROR: Cannot remove '%s' (%m)\n"
-msgstr "无法创建 %s: %m\n"
+msgstr "错误:无法移除 '%s' (%m)\n"
#: src/pam-config.c:383
#, c-format
@@ -388,12 +388,12 @@
msgstr "错误:未能禁用 pam_unix.so。\n"
#: src/sanity_checks.c:217
-#, fuzzy, c-format
+#, c-format
msgid ""
"ERROR: pam_apparmor and pam_selinux together is not allowed.\n"
"Configuration not changed!\n"
msgstr ""
-"错误:ldap-account_only 只有在和 krb5 相结合时才可以。\n"
+"错误:pam_apparmor 不能和 pam_selinux 组合使用。\n"
"配置没有改变!\n"
#: src/single_config.c:249
@@ -420,19 +420,3 @@
#, c-format
msgid "Cannot create %s: %m\n"
msgstr "无法创建 %s: %m\n"
-
-#~ msgid ""
-#~ "INFO: Both options 'md5' and 'bigcrypt' found in service %s.\n"
-#~ "INFO: 'md5' supersedes 'bigcrypt'. If you want to enable 'bigcrypt' "
-#~ "remove 'md5' first.\n"
-#~ msgstr ""
-#~ "信息:在服务 %s 中同时找到了“md5”和“bigcrypt”选项。\n"
-#~ "信息:“md5”将替代“bigcrypt”。如果您要启用“bigcrypt”,请先将“md5”移除。\n"
-
-#~ msgid ""
-#~ "INFO: Both options 'audit' and 'debug' found in service %s.\n"
-#~ "INFO: 'audit' supersedes 'debug'. If you want to enable 'debug' remove "
-#~ "'audit' first.\n"
-#~ msgstr ""
-#~ "信息:在服务 %s 中同时找到了“audit”和“debug”选项。\n"
-#~ "信息:“audit”将替代“debug”。如果您要启用“debug”,请先将“audit”移除。\n"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/src/pam-config.8 new/pam-config-0.68/src/pam-config.8
--- old/pam-config-0.67/src/pam-config.8 2008-11-21 13:13:12.000000000 +0100
+++ new/pam-config-0.68/src/pam-config.8 2008-12-01 14:46:30.000000000 +0100
@@ -1,12 +1,12 @@
.\" Title: pam-config
.\" Author: [see the "AUTHOR" section]
.\" Generator: DocBook XSL Stylesheets v1.74.0 http://docbook.sf.net/
-.\" Date: 11/21/2008
+.\" Date: 12/01/2008
.\" Manual: Reference Manual
.\" Source: Reference Manual
.\" Language: English
.\"
-.TH "PAM\-CONFIG" "8" "11/21/2008" "Reference Manual" "Reference Manual"
+.TH "PAM\-CONFIG" "8" "12/01/2008" "Reference Manual" "Reference Manual"
.\" -----------------------------------------------------------------
.\" * (re)Define some macros
.\" -----------------------------------------------------------------
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/src/pam-config.c new/pam-config-0.68/src/pam-config.c
--- old/pam-config-0.67/src/pam-config.c 2008-11-07 11:33:53.000000000 +0100
+++ new/pam-config-0.68/src/pam-config.c 2008-12-01 11:07:52.000000000 +0100
@@ -148,17 +148,17 @@
}
static int
-check_symlink (const char *old, const char *new)
+check_symlink (const char *file_pc, const char *file)
{
- if (access (new, F_OK) == -1)
+ if (access (file, F_OK) == -1)
{
- if (symlink (old, new) != 0)
+ if (symlink (basename(file_pc), file) != 0)
{
fprintf (stderr,
- _("Error activating %s (%m)\n"), new);
+ _("Error activating %s (%m)\n"), file);
fprintf (stderr,
_("New config from %s is not in use!\n"),
- old);
+ file_pc);
return 1;
}
return 0;
@@ -168,14 +168,14 @@
char buf[1024];
memset (&buf, 0, sizeof (buf));
- if (readlink (new, buf, sizeof (buf)) <= 0 ||
- strcmp (old, buf) != 0)
+ if (readlink (file, buf, sizeof (buf)) <= 0 ||
+ strcmp (basename(file_pc), basename(buf)) != 0)
{
fprintf (stderr,
- _("File %s is no symlink to %s.\n"), new, old);
+ _("File %s is no symlink to %s.\n"), file, file_pc);
fprintf (stderr,
_("New config from %s is is not in use!\n"),
- old);
+ file_pc);
return 1;
}
return 0;
@@ -205,7 +205,7 @@
if (unlink (file) != 0)
fprintf (stderr, _("ERROR: Cannot remove '%s' (%m)\n"), file);
- if (symlink (file_pc, file) != 0)
+ if (symlink (basename(file_pc), file) != 0)
{
fprintf (stderr,
_("Error activating %s (%m)\n"), file);
@@ -924,7 +924,7 @@
fflush (stdout); /* Make sure output in logs is consistent */
if (unlink (conf_account) != 0 ||
- symlink (conf_account_pc, conf_account) != 0)
+ symlink (basename(conf_account_pc), conf_account) != 0)
{
fprintf (stderr,
_("Error activating %s (%m)\n"), conf_account);
@@ -934,7 +934,7 @@
}
if (unlink (conf_auth) != 0 ||
- symlink (conf_auth_pc, conf_auth) != 0)
+ symlink (basename(conf_auth_pc), conf_auth) != 0)
{
fprintf (stderr,
_("Error activating %s (%m)\n"), conf_auth);
@@ -944,7 +944,7 @@
}
if (unlink (conf_password) != 0 ||
- symlink (conf_password_pc, conf_password) != 0)
+ symlink (basename(conf_password_pc), conf_password) != 0)
{
fprintf (stderr,
_("Error activating %s (%m)\n"), conf_password);
@@ -955,7 +955,7 @@
}
if (unlink (conf_session) != 0 ||
- symlink (conf_session_pc, conf_session) != 0)
+ symlink (basename(conf_session_pc), conf_session) != 0)
{
fprintf (stderr,
_("Error activating %s (%m)\n"), conf_session);
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/config/Makefile new/pam-config-0.68/tests/config/Makefile
--- old/pam-config-0.67/tests/config/Makefile 2008-11-21 13:12:49.000000000 +0100
+++ new/pam-config-0.68/tests/config/Makefile 2008-12-01 14:46:08.000000000 +0100
@@ -29,8 +29,8 @@
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_triplet = x86_64-suse-linux-gnu
-host_triplet = x86_64-suse-linux-gnu
+build_triplet = i686-suse-linux-gnu
+host_triplet = i686-suse-linux-gnu
subdir = tests/config
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -49,11 +49,11 @@
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run aclocal-1.10
-AMTAR = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run tar
-AUTOCONF = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoconf
-AUTOHEADER = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoheader
-AUTOMAKE = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run automake-1.10
+ACLOCAL = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run aclocal-1.10
+AMTAR = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run tar
+AUTOCONF = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoconf
+AUTOHEADER = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoheader
+AUTOMAKE = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run automake-1.10
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
@@ -66,12 +66,12 @@
ECHO_C =
ECHO_N = -n
ECHO_T =
-EGREP = /bin/grep -E
+EGREP = /usr/bin/grep -E
EXEEXT =
EXTRA_CFLAGS = -Werror -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -DXTSTRINGDEFINES -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
-GREP = /bin/grep
+GREP = /usr/bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
@@ -87,7 +87,7 @@
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
-MAKEINFO = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run makeinfo
+MAKEINFO = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = /usr/bin/msgfmt
@@ -106,17 +106,17 @@
SHELL = /bin/sh
STRIP =
USE_NLS = yes
-VERSION = 0.67
+VERSION = 0.68
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XMLCATALOG = /usr/bin/xmlcatalog
XMLLINT = /usr/bin/xmllint
XML_CATALOG_FILE = /etc/xml/catalog
XSLTPROC = /usr/bin/xsltproc
-abs_builddir = /data/kukuk/pakete/svn/pam-config/trunk/tests/config
-abs_srcdir = /data/kukuk/pakete/svn/pam-config/trunk/tests/config
-abs_top_builddir = /data/kukuk/pakete/svn/pam-config/trunk
-abs_top_srcdir = /data/kukuk/pakete/svn/pam-config/trunk
+abs_builddir = /cvs/PAM/pam-config/trunk/tests/config
+abs_srcdir = /cvs/PAM/pam-config/trunk/tests/config
+abs_top_builddir = /cvs/PAM/pam-config/trunk
+abs_top_srcdir = /cvs/PAM/pam-config/trunk
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
@@ -124,9 +124,9 @@
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
-build = x86_64-suse-linux-gnu
+build = i686-suse-linux-gnu
build_alias =
-build_cpu = x86_64
+build_cpu = i686
build_os = linux-gnu
build_vendor = suse
builddir = .
@@ -135,15 +135,15 @@
docdir = ${datarootdir}/doc/${PACKAGE}
dvidir = ${docdir}
exec_prefix = ${prefix}
-host = x86_64-suse-linux-gnu
+host = i686-suse-linux-gnu
host_alias =
-host_cpu = x86_64
+host_cpu = i686
host_os = linux-gnu
host_vendor = suse
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
-install_sh = $(SHELL) /data/kukuk/pakete/svn/pam-config/trunk/install-sh
+install_sh = $(SHELL) /cvs/PAM/pam-config/trunk/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
@@ -176,9 +176,9 @@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits tests/config/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/config/Makefile'; \
cd $(top_srcdir) && \
- $(AUTOMAKE) --gnits tests/config/Makefile
+ $(AUTOMAKE) --gnu tests/config/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/etc/pam.d/Makefile new/pam-config-0.68/tests/etc/pam.d/Makefile
--- old/pam-config-0.67/tests/etc/pam.d/Makefile 2008-11-21 13:22:39.000000000 +0100
+++ new/pam-config-0.68/tests/etc/pam.d/Makefile 2008-12-01 11:08:06.000000000 +0100
@@ -29,8 +29,8 @@
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_triplet = x86_64-suse-linux-gnu
-host_triplet = x86_64-suse-linux-gnu
+build_triplet = i686-suse-linux-gnu
+host_triplet = i686-suse-linux-gnu
subdir = tests/etc
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -49,11 +49,11 @@
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run aclocal-1.10
-AMTAR = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run tar
-AUTOCONF = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoconf
-AUTOHEADER = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoheader
-AUTOMAKE = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run automake-1.10
+ACLOCAL = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run aclocal-1.10
+AMTAR = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run tar
+AUTOCONF = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoconf
+AUTOHEADER = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoheader
+AUTOMAKE = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run automake-1.10
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
@@ -66,12 +66,12 @@
ECHO_C =
ECHO_N = -n
ECHO_T =
-EGREP = /bin/grep -E
+EGREP = /usr/bin/grep -E
EXEEXT =
EXTRA_CFLAGS = -Werror -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -DXTSTRINGDEFINES -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
-GREP = /bin/grep
+GREP = /usr/bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
@@ -87,7 +87,7 @@
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
-MAKEINFO = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run makeinfo
+MAKEINFO = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = /usr/bin/msgfmt
@@ -113,10 +113,10 @@
XMLLINT = /usr/bin/xmllint
XML_CATALOG_FILE = /etc/xml/catalog
XSLTPROC = /usr/bin/xsltproc
-abs_builddir = /data/kukuk/pakete/svn/pam-config/trunk/tests/etc
-abs_srcdir = /data/kukuk/pakete/svn/pam-config/trunk/tests/etc
-abs_top_builddir = /data/kukuk/pakete/svn/pam-config/trunk
-abs_top_srcdir = /data/kukuk/pakete/svn/pam-config/trunk
+abs_builddir = /cvs/PAM/pam-config/trunk/tests/etc
+abs_srcdir = /cvs/PAM/pam-config/trunk/tests/etc
+abs_top_builddir = /cvs/PAM/pam-config/trunk
+abs_top_srcdir = /cvs/PAM/pam-config/trunk
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
@@ -124,9 +124,9 @@
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
-build = x86_64-suse-linux-gnu
+build = i686-suse-linux-gnu
build_alias =
-build_cpu = x86_64
+build_cpu = i686
build_os = linux-gnu
build_vendor = suse
builddir = .
@@ -135,15 +135,15 @@
docdir = ${datarootdir}/doc/${PACKAGE}
dvidir = ${docdir}
exec_prefix = ${prefix}
-host = x86_64-suse-linux-gnu
+host = i686-suse-linux-gnu
host_alias =
-host_cpu = x86_64
+host_cpu = i686
host_os = linux-gnu
host_vendor = suse
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
-install_sh = $(SHELL) /data/kukuk/pakete/svn/pam-config/trunk/install-sh
+install_sh = $(SHELL) /cvs/PAM/pam-config/trunk/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/pam-config.test/Makefile new/pam-config-0.68/tests/pam-config.test/Makefile
--- old/pam-config-0.67/tests/pam-config.test/Makefile 2008-11-21 13:12:49.000000000 +0100
+++ new/pam-config-0.68/tests/pam-config.test/Makefile 2008-12-01 14:46:08.000000000 +0100
@@ -29,8 +29,8 @@
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
-build_triplet = x86_64-suse-linux-gnu
-host_triplet = x86_64-suse-linux-gnu
+build_triplet = i686-suse-linux-gnu
+host_triplet = i686-suse-linux-gnu
subdir = tests/pam-config.test
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
@@ -49,11 +49,11 @@
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run aclocal-1.10
-AMTAR = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run tar
-AUTOCONF = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoconf
-AUTOHEADER = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run autoheader
-AUTOMAKE = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run automake-1.10
+ACLOCAL = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run aclocal-1.10
+AMTAR = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run tar
+AUTOCONF = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoconf
+AUTOHEADER = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run autoheader
+AUTOMAKE = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run automake-1.10
AWK = gawk
CC = gcc
CCDEPMODE = depmode=gcc3
@@ -66,12 +66,12 @@
ECHO_C =
ECHO_N = -n
ECHO_T =
-EGREP = /bin/grep -E
+EGREP = /usr/bin/grep -E
EXEEXT =
EXTRA_CFLAGS = -Werror -W -Wall -Wbad-function-cast -Wcast-align -Wcast-qual -DXTSTRINGDEFINES -Winline -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wshadow -Wstrict-prototypes -Wundef
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
-GREP = /bin/grep
+GREP = /usr/bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
@@ -87,7 +87,7 @@
LTLIBICONV = -liconv
LTLIBINTL =
LTLIBOBJS =
-MAKEINFO = ${SHELL} /data/kukuk/pakete/svn/pam-config/trunk/missing --run makeinfo
+MAKEINFO = ${SHELL} /cvs/PAM/pam-config/trunk/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = /usr/bin/msgfmt
@@ -106,17 +106,17 @@
SHELL = /bin/sh
STRIP =
USE_NLS = yes
-VERSION = 0.67
+VERSION = 0.68
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XMLCATALOG = /usr/bin/xmlcatalog
XMLLINT = /usr/bin/xmllint
XML_CATALOG_FILE = /etc/xml/catalog
XSLTPROC = /usr/bin/xsltproc
-abs_builddir = /data/kukuk/pakete/svn/pam-config/trunk/tests/pam-config.test
-abs_srcdir = /data/kukuk/pakete/svn/pam-config/trunk/tests/pam-config.test
-abs_top_builddir = /data/kukuk/pakete/svn/pam-config/trunk
-abs_top_srcdir = /data/kukuk/pakete/svn/pam-config/trunk
+abs_builddir = /cvs/PAM/pam-config/trunk/tests/pam-config.test
+abs_srcdir = /cvs/PAM/pam-config/trunk/tests/pam-config.test
+abs_top_builddir = /cvs/PAM/pam-config/trunk
+abs_top_srcdir = /cvs/PAM/pam-config/trunk
ac_ct_CC = gcc
am__include = include
am__leading_dot = .
@@ -124,9 +124,9 @@
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
-build = x86_64-suse-linux-gnu
+build = i686-suse-linux-gnu
build_alias =
-build_cpu = x86_64
+build_cpu = i686
build_os = linux-gnu
build_vendor = suse
builddir = .
@@ -135,15 +135,15 @@
docdir = ${datarootdir}/doc/${PACKAGE}
dvidir = ${docdir}
exec_prefix = ${prefix}
-host = x86_64-suse-linux-gnu
+host = i686-suse-linux-gnu
host_alias =
-host_cpu = x86_64
+host_cpu = i686
host_os = linux-gnu
host_vendor = suse
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
-install_sh = $(SHELL) /data/kukuk/pakete/svn/pam-config/trunk/install-sh
+install_sh = $(SHELL) /cvs/PAM/pam-config/trunk/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
@@ -176,9 +176,9 @@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits tests/pam-config.test/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/pam-config.test/Makefile'; \
cd $(top_srcdir) && \
- $(AUTOMAKE) --gnits tests/pam-config.test/Makefile
+ $(AUTOMAKE) --gnu tests/pam-config.test/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/single.out/test-mount-thinkfinger.err new/pam-config-0.68/tests/single.out/test-mount-thinkfinger.err
--- old/pam-config-0.67/tests/single.out/test-mount-thinkfinger.err 2008-09-03 13:53:12.000000000 +0200
+++ new/pam-config-0.68/tests/single.out/test-mount-thinkfinger.err 2008-11-28 15:32:34.000000000 +0100
@@ -1 +1 @@
-ERROR: Module pam_thinkfinger.so is enabled. Disable it first.
+ERROR: Module pam_fp.so is enabled. Disable it first.
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/single.out/test-thinkfinger-mount.err new/pam-config-0.68/tests/single.out/test-thinkfinger-mount.err
--- old/pam-config-0.67/tests/single.out/test-thinkfinger-mount.err 2008-09-03 13:53:12.000000000 +0200
+++ new/pam-config-0.68/tests/single.out/test-thinkfinger-mount.err 2008-11-28 15:32:39.000000000 +0100
@@ -1,2 +1,2 @@
WARNING: Found module 'pam_mount.so' in file 'gdm'.
-ERROR: pam_mount.so is enabled. In order to use pam_thinkfinger.so you need to disable it first!
+ERROR: pam_mount.so is enabled. In order to use pam_fp.so you need to disable it first!
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/single.out/test-thinkfinger.out new/pam-config-0.68/tests/single.out/test-thinkfinger.out
--- old/pam-config-0.67/tests/single.out/test-thinkfinger.out 2008-09-03 13:53:12.000000000 +0200
+++ new/pam-config-0.68/tests/single.out/test-thinkfinger.out 2008-11-28 15:32:58.000000000 +0100
@@ -12,7 +12,7 @@
# traditional Unix authentication mechanisms.
#
auth required pam_env.so
-auth sufficient pam_thinkfinger.so
+auth sufficient pam_fp.so
auth required pam_unix2.so debug
#%PAM-1.0
#
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/testcases/test-mount-thinkfinger.single new/pam-config-0.68/tests/testcases/test-mount-thinkfinger.single
--- old/pam-config-0.67/tests/testcases/test-mount-thinkfinger.single 2008-09-03 13:53:13.000000000 +0200
+++ new/pam-config-0.68/tests/testcases/test-mount-thinkfinger.single 2008-11-28 15:30:50.000000000 +0100
@@ -9,7 +9,7 @@
. support/header.sh
# Enable pam_thinkfinger.so
-$PAMCONFIG -a --thinkfinger
+$PAMCONFIG -a --fp
# Try to add module pam_mount.so to service gdm. Should fail.
$PAMCONFIG --service gdm -a --mount
echo $?
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/testcases/test-thinkfinger-mount.single new/pam-config-0.68/tests/testcases/test-thinkfinger-mount.single
--- old/pam-config-0.67/tests/testcases/test-thinkfinger-mount.single 2008-09-03 13:53:13.000000000 +0200
+++ new/pam-config-0.68/tests/testcases/test-thinkfinger-mount.single 2008-11-28 15:31:29.000000000 +0100
@@ -3,7 +3,7 @@
$PAMCONFIG --service gdm -a --mount
# this should produce an error msg
-$PAMCONFIG -a --thinkfinger
+$PAMCONFIG -a --fp
echo $?
# no need for footers here as we're not interessted in changes to
# pam.d files here
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/pam-config-0.67/tests/testcases/test-thinkfinger.single new/pam-config-0.68/tests/testcases/test-thinkfinger.single
--- old/pam-config-0.67/tests/testcases/test-thinkfinger.single 2008-09-03 13:53:13.000000000 +0200
+++ new/pam-config-0.68/tests/testcases/test-thinkfinger.single 2008-11-28 15:32:24.000000000 +0100
@@ -1,6 +1,6 @@
#!/bin/sh
. support/header.sh
-$PAMCONFIG -a --thinkfinger
+$PAMCONFIG -a --fp
. support/footer-common.sh
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
--
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org