Hello community,
here is the log from the commit of package yast2-live-installer
checked in at Fri Nov 2 16:50:55 CET 2007.
--------
--- yast2-live-installer/yast2-live-installer.changes 2007-09-26 17:20:42.000000000 +0200
+++ /mounts/work_src_done/NOARCH/yast2-live-installer/yast2-live-installer.changes 2007-11-02 16:44:26.000000000 +0100
@@ -1,0 +2,27 @@
+Fri Nov 2 16:41:13 CET 2007 - locilka@suse.cz
+
+- Adjusted RPM dependencies, adjusted YCP clients (YCP module
+ Internet has been moved to yast2 from yast2-network, some
+ functions were moved to InternetDevices module).
+- 2.16.0
+
+-------------------------------------------------------------------
+Thu Oct 11 15:02:18 CEST 2007 - jsrain@suse.cz
+
+- save X11 keyboard configuration (#310517)
+
+-------------------------------------------------------------------
+Wed Oct 10 12:46:18 CEST 2007 - jsrain@suse.cz
+
+- added registration to the live installation workflow (#325560)
+- issue warning if DMRAID detected (#328388)
+
+-------------------------------------------------------------------
+Thu Oct 4 14:26:12 CEST 2007 - locilka@suse.cz
+
+- Adding missing live_save_config_finish script (#310517).
+- Adding new inst_live_pre-proposal script that adjusts Kernel
+ vga parameter according to /proc/cmdline (#297612).
+- 2.15.13
+
+-------------------------------------------------------------------
Old:
----
yast2-live-installer-2.15.12.tar.bz2
New:
----
yast2-live-installer-2.16.0.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-live-installer.spec ++++++
--- /var/tmp/diff_new_pack.o17479/_old 2007-11-02 16:50:50.000000000 +0100
+++ /var/tmp/diff_new_pack.o17479/_new 2007-11-02 16:50:50.000000000 +0100
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-live-installer (Version 2.15.12)
+# spec file for package yast2-live-installer (Version 2.16.0)
#
# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -11,14 +11,17 @@
# norootforbuild
Name: yast2-live-installer
-Version: 2.15.12
+Version: 2.16.0
Release: 1
License: GPL v2 or later
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-live-installer-2.15.12.tar.bz2
+Source0: yast2-live-installer-2.16.0.tar.bz2
Prefix: /usr
-Requires: yast2
+# Internet and InternetDevices
+Requires: yast2 >= 2.16.6
+Requires: yast2-network >= 2.16.6
+Requires: yast2-bootloader yast2-country yast2-installation yast2-storage
BuildRequires: perl-XML-Writer update-desktop-files yast2 yast2-devtools yast2-testsuite
BuildArch: noarch
Summary: YaST2 - Installation from Live Media
@@ -34,7 +37,7 @@
Jiri Srain
%prep
-%setup -n yast2-live-installer-2.15.12
+%setup -n yast2-live-installer-2.16.0
%build
%{prefix}/bin/y2tool y2autoconf
@@ -65,6 +68,21 @@
/etc/YaST2/live-install.xml
%doc %{prefix}/share/doc/packages/yast2-live-installer
%changelog
+* Fri Nov 02 2007 - locilka@suse.cz
+- Adjusted RPM dependencies, adjusted YCP clients (YCP module
+ Internet has been moved to yast2 from yast2-network, some
+ functions were moved to InternetDevices module).
+- 2.16.0
+* Thu Oct 11 2007 - jsrain@suse.cz
+- save X11 keyboard configuration (#310517)
+* Wed Oct 10 2007 - jsrain@suse.cz
+- added registration to the live installation workflow (#325560)
+- issue warning if DMRAID detected (#328388)
+* Thu Oct 04 2007 - locilka@suse.cz
+- Adding missing live_save_config_finish script (#310517).
+- Adding new inst_live_pre-proposal script that adjusts Kernel
+ vga parameter according to /proc/cmdline (#297612).
+- 2.15.13
* Wed Sep 26 2007 - jsrain@suse.cz
- added missing step to prepare internet test (#325560)
- 2.15.12
++++++ yast2-live-installer-2.15.12.tar.bz2 -> yast2-live-installer-2.16.0.tar.bz2 ++++++
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/configure new/yast2-live-installer-2.16.0/configure
--- old/yast2-live-installer-2.15.12/configure 2007-09-26 17:19:26.000000000 +0200
+++ new/yast2-live-installer-2.16.0/configure 2007-11-02 16:44:52.000000000 +0100
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for yast2-live-installer 2.15.12.
+# Generated by GNU Autoconf 2.61 for yast2-live-installer 2.16.0.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -574,8 +574,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-live-installer'
PACKAGE_TARNAME='yast2-live-installer'
-PACKAGE_VERSION='2.15.12'
-PACKAGE_STRING='yast2-live-installer 2.15.12'
+PACKAGE_VERSION='2.16.0'
+PACKAGE_STRING='yast2-live-installer 2.16.0'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -1199,7 +1199,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-live-installer 2.15.12 to adapt to many kinds of systems.
+\`configure' configures yast2-live-installer 2.16.0 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1270,7 +1270,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-live-installer 2.15.12:";;
+ short | recursive ) echo "Configuration of yast2-live-installer 2.16.0:";;
esac
cat <<\_ACEOF
@@ -1348,7 +1348,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-yast2-live-installer configure 2.15.12
+yast2-live-installer configure 2.16.0
generated by GNU Autoconf 2.61
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1362,7 +1362,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-live-installer $as_me 2.15.12, which was
+It was created by yast2-live-installer $as_me 2.16.0, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
@@ -2183,7 +2183,7 @@
# Define the identity of the package.
PACKAGE='yast2-live-installer'
- VERSION='2.15.12'
+ VERSION='2.16.0'
cat >>confdefs.h <<_ACEOF
@@ -2410,7 +2410,7 @@
-VERSION="2.15.12"
+VERSION="2.16.0"
RPMNAME="yast2-live-installer"
MAINTAINER="Jiri Srain "
@@ -3401,7 +3401,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by yast2-live-installer $as_me 2.15.12, which was
+This file was extended by yast2-live-installer $as_me 2.16.0, which was
generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -3444,7 +3444,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-yast2-live-installer config.status 2.15.12
+yast2-live-installer config.status 2.16.0
configured by $0, generated by GNU Autoconf 2.61,
with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/configure.in new/yast2-live-installer-2.16.0/configure.in
--- old/yast2-live-installer-2.15.12/configure.in 2007-09-26 17:19:22.000000000 +0200
+++ new/yast2-live-installer-2.16.0/configure.in 2007-11-02 16:44:48.000000000 +0100
@@ -1,9 +1,9 @@
dnl configure.in for yast2-live-installer
dnl
-dnl -- This file is generated by y2autoconf 2.15.8 - DO NOT EDIT! --
+dnl -- This file is generated by y2autoconf 2.16.0 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-live-installer, 2.15.12, http://bugs.opensuse.org/, yast2-live-installer)
+AC_INIT(yast2-live-installer, 2.16.0, http://bugs.opensuse.org/, yast2-live-installer)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -17,7 +17,7 @@
AM_INIT_AUTOMAKE(tar-ustar) dnl searches for some needed programs
dnl Important YaST2 variables
-VERSION="2.15.12"
+VERSION="2.16.0"
RPMNAME="yast2-live-installer"
MAINTAINER="Jiri Srain "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/COPYRIGHT.english new/yast2-live-installer-2.16.0/COPYRIGHT.english
--- old/yast2-live-installer-2.15.12/COPYRIGHT.english 2007-09-26 17:19:41.000000000 +0200
+++ new/yast2-live-installer-2.16.0/COPYRIGHT.english 1970-01-01 01:00:00.000000000 +0100
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/live-installer.pot new/yast2-live-installer-2.16.0/live-installer.pot
--- old/yast2-live-installer-2.15.12/live-installer.pot 2007-08-10 13:43:22.000000000 +0200
+++ new/yast2-live-installer-2.16.0/live-installer.pot 1970-01-01 01:00:00.000000000 +0100
@@ -1,255 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR SuSE Linux Products GmbH, Nuernberg
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR , YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-08-10 13:43+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME \n"
-"Language-Team: LANGUAGE \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/control/live-install.glade:70
-msgid ""
-"\n"
-"<p><b>Congratulations!</b></p>\n"
-"<p>The installation of openSUSE on your machine is complete.\n"
-"After clicking <b>Finish</b>, you can log in to the system.</p>\n"
-"<p>Visit us at %1.</p>\n"
-"<p>Have a lot of fun!<br>Your openSUSE Development Team</p>\n"
-"\t"
-msgstr ""
-
-#: src/control/live-install.glade:82
-msgid "Copy files to installed system\""
-msgstr ""
-
-#: src/control/live-install.glade:89
-msgid "Save configuration"
-msgstr ""
-
-#: src/control/live-install.glade:96
-msgid "Install boot manager\""
-msgstr ""
-
-#: src/control/live-install.glade:102
-msgid "Prepare system for initial boot\""
-msgstr ""
-
-#: src/control/live-install.glade:117
-msgid "Live Installation Settings"
-msgstr ""
-
-#: src/control/live-install.glade:140
-msgid "Installation"
-msgstr ""
-
-#: src/control/live-install.glade:145
-msgid "Welcome"
-msgstr ""
-
-#: src/control/live-install.glade:149 src/control/live-install.glade:154
-msgid "Installation Settings"
-msgstr ""
-
-#: src/control/live-install.glade:159 src/control/live-install.glade:165
-#: src/control/live-install.glade:169 src/control/live-install.glade:173
-#: src/control/live-install.glade:179
-msgid "Perform Installation"
-msgstr ""
-
-#: src/control/live-install.glade:191
-msgid "Configuration"
-msgstr ""
-
-#: src/control/live-install.glade:196
-msgid "root Password"
-msgstr ""
-
-#: src/control/live-install.glade:200
-msgid "Users"
-msgstr ""
-
-#: src/control/live-install.glade:204
-msgid "Network"
-msgstr ""
-
-#: src/control/live-install.glade:208 src/control/live-install.glade:218
-#: src/control/live-install.glade:224 src/control/live-install.glade:228
-msgid "Online Update"
-msgstr ""
-
-#: src/inst_live_add_base_repo.ycp:25 src/inst_live_sw_select.ycp:16
-msgid "Software Installation"
-msgstr ""
-
-#: src/inst_live_doit.ycp:140
-#, ycp-format
-msgid "Copying %1..."
-msgstr ""
-
-#. Headline for last dialog of base installation: Install LILO etc.
-#: src/inst_live_doit.ycp:175
-msgid "Copying the Live Image to Hard Disk"
-msgstr ""
-
-#: src/inst_live_doit.ycp:178
-msgid "Evaluate filesystems to copy"
-msgstr ""
-
-#: src/inst_live_doit.ycp:178
-msgid "Copy root filesystem"
-msgstr ""
-
-#: src/inst_live_doit.ycp:178
-msgid "Copy additional filesystems"
-msgstr ""
-
-#: src/inst_live_doit.ycp:186
-msgid "Evaluating filesystems to copy..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:189
-msgid "Copying root filesystem..."
-msgstr ""
-
-#: src/inst_live_doit.ycp:198
-msgid "Finished."
-msgstr ""
-
-#. dialog caption
-#: src/inst_live_simple_proposal.ycp:22 src/inst_live_simple_proposal.ycp:155
-msgid "Installation settings"
-msgstr ""
-
-#. label
-#: src/inst_live_simple_proposal.ycp:24
-msgid "Analyzing the system..."
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:84
-#, ycp-format
-msgid "Use %1%% of disk %2 for Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:88
-#, ycp-format
-msgid "Do not use disk %1"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:92
-msgid "Partitioning"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:109
-msgid "System start-up"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:111
-msgid "Ask whether to boot Linux or existing system"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:112
-msgid "Boot only Linux"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:113
-#, ycp-format
-msgid "System start time-out: %1 seconds"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:119
-msgid "Keyboard"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:126
-msgid "Time Zone"
-msgstr ""
-
-#: src/inst_live_simple_proposal.ycp:136
-msgid "Change Installation Settings"
-msgstr ""
-
-#. help text 1/3
-#: src/inst_live_simple_proposal.ycp:141
-msgid ""
-"<p>\n"
-"Use <b>Accept</b> to perform a new installation with the values displayed.</p>"
-msgstr ""
-
-#. help text 2/3
-#: src/inst_live_simple_proposal.ycp:144
-msgid ""
-"<p>\n"
-"Change the values by clicking on the respective headline\n"
-"or by using the <b>Change Installation Settings</b> button.</p>"
-msgstr ""
-
-#. help text 3/3
-#: src/inst_live_simple_proposal.ycp:148
-msgid ""
-"<p>\n"
-"Your hard disk has not been modified in any way, so you can still safely abort.\n"
-"</p>"
-msgstr ""
-
-#. help text 1/1
-#: src/inst_live_welcome.ycp:14
-msgid ""
-"<p>Welcome to the &product; installation.\n"
-"Push <b>Next</p> to run the installation wizard.</p>"
-msgstr ""
-
-#. dialog caption, %1 is product name (typically openSUSE)
-#: src/inst_live_welcome.ycp:19
-#, ycp-format
-msgid "Welcome to %1 installation"
-msgstr ""
-
-#. wellcome label, %1 is product name
-#: src/inst_live_welcome.ycp:21
-#, ycp-format
-msgid ""
-"Your %1 will be installed quickly\n"
-"and easily in a few steps.\n"
-"You will only have to answer some questions."
-msgstr ""
-
-#. TRANSLATORS: error message - the module does not provide command line interface
-#: src/live-installer.ycp:27
-msgid "There is no user interface available for this module."
-msgstr ""
-
-#. progress step title
-#: src/live_copy_files_finish.ycp:51
-msgid "Copying files to installed system..."
-msgstr ""
-
-#. progress step title
-#: src/live_runme_at_boot_finish.ycp:45
-msgid "Writing YaST Configuration..."
-msgstr ""
-
-#. FIXME doesn't belong here
-#: src/live_runme_at_boot_finish.ycp:66
-msgid ""
-"Reboot the computer without the Live CD in the drive\n"
-"to continue the installation."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:48
-msgid "Saving keyboard configuration..."
-msgstr ""
-
-#. progress step title
-#: src/live_save_config_finish.ycp:52
-msgid "Saving time zone..."
-msgstr ""
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/Makefile.am new/yast2-live-installer-2.16.0/Makefile.am
--- old/yast2-live-installer-2.15.12/Makefile.am 2007-09-26 17:19:22.000000000 +0200
+++ new/yast2-live-installer-2.16.0/Makefile.am 2007-11-02 16:44:48.000000000 +0100
@@ -23,7 +23,7 @@
ALL_PACKAGES = $(DEVTOOLS_DIR)/admin/all-packages
LEGALESE_DIR = $(if $(HAS_YAST_LICENSE),$(DEVTOOLS_DIR)/admin/copyright/yast,$(DEVTOOLS_DIR)/admin/copyright/gpl)
-COPYRIGHT_files_gpl = README COPYING COPYRIGHT.english
+COPYRIGHT_files_gpl = README COPYING
COPYRIGHT_files_yast = YAST_LICENSE README COPYING COPYRIGHT.english \
COPYRIGHT.french COPYRIGHT.german COPYRIGHT.spanish
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/Makefile.in new/yast2-live-installer-2.16.0/Makefile.in
--- old/yast2-live-installer-2.15.12/Makefile.in 2007-09-26 17:19:27.000000000 +0200
+++ new/yast2-live-installer-2.16.0/Makefile.in 2007-11-02 16:44:54.000000000 +0100
@@ -219,7 +219,7 @@
DEVTOOLS_DIR = $(if $(IS_DEVTOOLS),$(srcdir)/devtools,$(Y2DEVTOOLS_PREFIX)/share/YaST2/data/devtools)
ALL_PACKAGES = $(DEVTOOLS_DIR)/admin/all-packages
LEGALESE_DIR = $(if $(HAS_YAST_LICENSE),$(DEVTOOLS_DIR)/admin/copyright/yast,$(DEVTOOLS_DIR)/admin/copyright/gpl)
-COPYRIGHT_files_gpl = README COPYING COPYRIGHT.english
+COPYRIGHT_files_gpl = README COPYING
COPYRIGHT_files_yast = YAST_LICENSE README COPYING COPYRIGHT.english \
COPYRIGHT.french COPYRIGHT.german COPYRIGHT.spanish
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/README new/yast2-live-installer-2.16.0/README
--- old/yast2-live-installer-2.15.12/README 2007-09-26 17:19:41.000000000 +0200
+++ new/yast2-live-installer-2.16.0/README 2007-11-02 16:48:11.000000000 +0100
@@ -1,2 +1,2 @@
This program/library is part of YaST2
-See the file COPYRIGHT.english for license terms
+See the file COPYING for license terms
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/src/control/live-install.xml new/yast2-live-installer-2.16.0/src/control/live-install.xml
--- old/yast2-live-installer-2.15.12/src/control/live-install.xml 2007-09-26 16:45:46.000000000 +0200
+++ new/yast2-live-installer-2.16.0/src/control/live-install.xml 2007-10-10 13:45:12.000000000 +0200
@@ -163,6 +163,10 @@
-->
<module>
<label>Installation Settings</label>
+ <name>inst_live_pre-proposal</name>
+ </module>
+ <module>
+ <label>Installation Settings</label>
<name>inst_proposal</name>
<proposal>initial</proposal>
</module>
@@ -212,19 +216,23 @@
<name>user</name>
</module>
<module>
- <label>Online Update</label>
+ <label>Registration</label>
<name>inst_live_prepare_net_test</name>
</module>
<module>
- <label>Online Update</label>
+ <label>Registration</label>
<name>inst_do_net_test</name>
</module>
<!--
- <module>
- <label>Configure Software Management</label>
- <name>inst_live_add_base_repo</name>
- </module>
+ <module>
+ <label>Configure Software Management</label>
+ <name>inst_live_add_base_repo</name>
+ </module>
-->
+ <module>
+ <label>Registration</label>
+ <name>inst_suse_register</name>
+ </module>
<module>
<label>Online Update</label>
<name>ask_online_update</name>
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/src/inst_live_prepare_net_test.ycp new/yast2-live-installer-2.16.0/src/inst_live_prepare_net_test.ycp
--- old/yast2-live-installer-2.15.12/src/inst_live_prepare_net_test.ycp 2007-09-26 16:43:17.000000000 +0200
+++ new/yast2-live-installer-2.16.0/src/inst_live_prepare_net_test.ycp 2007-11-02 16:40:53.000000000 +0100
@@ -13,7 +13,7 @@
textdomain "network";
import "GetInstArgs";
-import "Internet";
+import "InternetDevices";
import "Mode";
include "network/routines.ycp";
@@ -32,7 +32,7 @@
}
/* Nothing to test */
-if(!Internet::FindFastest())
+if(!InternetDevices::FindFastest())
{
Internet::do_test = false;
return `auto;
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/src/inst_live_pre-proposal.ycp new/yast2-live-installer-2.16.0/src/inst_live_pre-proposal.ycp
--- old/yast2-live-installer-2.15.12/src/inst_live_pre-proposal.ycp 1970-01-01 01:00:00.000000000 +0100
+++ new/yast2-live-installer-2.16.0/src/inst_live_pre-proposal.ycp 2007-10-04 14:23:31.000000000 +0200
@@ -0,0 +1,51 @@
+/**
+ * Steps that need to be done before the installation proposal is called
+ */
+{
+
+ import "GetInstArgs";
+ import "Kernel";
+
+ // <-- functions -->
+
+ void SetVGAKernelParam () {
+ string cmldline = (string) WFM::Read (.local.string, "/proc/cmdline");
+
+ if (cmldline == nil) {
+ y2error ("No cmdline!");
+ return;
+ }
+
+ list <string> cmdline_args = splitstring (cmldline, " \t\n");
+
+ string just_parsing = "";
+
+ foreach (string cmdline_arg, cmdline_args, {
+ if (regexpmatch (cmdline_arg, "[vV][gG][aA]=.*")) {
+ just_parsing = cmdline_arg;
+ cmdline_arg = regexpsub (cmdline_arg, "[vV][gG][aA]=(.*)", "\\1");
+
+ if (cmdline_arg == nil || cmdline_arg == "") {
+ y2error ("Incorrect vga param %1", just_parsing);
+ break;
+ } else {
+ y2milestone ("Adjusting Kernel cmdline vga=%1", cmdline_arg);
+ Kernel::SetVgaType (cmdline_arg);
+ break;
+ }
+ }
+ });
+ }
+
+ // <-- functions -->
+
+ if (GetInstArgs::going_back()) {
+ y2milestone ("going back...");
+ return `back;
+ }
+
+ // bugzilla #297612
+ SetVGAKernelParam();
+
+ return `next;
+}
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/src/live-installer.ycp new/yast2-live-installer-2.16.0/src/live-installer.ycp
--- old/yast2-live-installer-2.15.12/src/live-installer.ycp 2007-08-10 12:32:04.000000000 +0200
+++ new/yast2-live-installer-2.16.0/src/live-installer.ycp 2007-10-15 13:21:17.000000000 +0200
@@ -14,9 +14,9 @@
import "LiveInstaller";
import "Misc";
import "Installation";
- import "Storage";
import "Product";
import "CommandLine";
+ import "Popup";
// Bugzilla #269890, CommanLine "support"
// argmap is only a map, CommandLine uses string parameters
@@ -31,6 +31,34 @@
Wizard::OpenNextBackStepsDialog();
Installation::destdir = "/mnt";
Installation::scr_destdir = "/mnt";
+ import "Storage";
+
+ // do several checks because of DMRAID problems - bug #328388
+ map out = (map)SCR::Execute (.target.bash_output, "
+/etc/init.d/boot.device-mapper start
+/etc/init.d/boot.lvm start
+echo 1 > /sys/module/md_mod/parameters/start_ro
+mdadm --examine --scan --config=partitions >/tmp/mdadm.conf
+mdadm --assemble --scan --config=/tmp/mdadm.conf
+");
+ y2milestone ("Device initialization output: %1", out);
+ out = (map)SCR::Execute (.target.bash_output, "
+hwinfo --disk | grep \"^Drive status: soft raid\"
+");
+ y2milestone ("Soft raid detection: %1", out);
+ if (out["exit"]:-1 == 0)
+ {
+ if (! Popup::ContinueCancel (
+// continue-cancel popup
+_("openSUSE installer detected DMRAID array.
+It is not supported by the openSUSE live installer.
+Continuing the installation may cause data loss.")))
+ {
+ UI::CloseDialog ();
+ return `back;
+ }
+ }
+
// FIXME hack because of bootloader - libzypp does not contain product database
Product::name = "openSUSE";
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/src/live_save_config_finish.ycp new/yast2-live-installer-2.16.0/src/live_save_config_finish.ycp
--- old/yast2-live-installer-2.15.12/src/live_save_config_finish.ycp 1970-01-01 01:00:00.000000000 +0100
+++ new/yast2-live-installer-2.16.0/src/live_save_config_finish.ycp 2007-10-15 13:21:17.000000000 +0200
@@ -0,0 +1,72 @@
+/**
+ * File:
+ * save_config_finish.ycp
+ *
+ * Module:
+ * Step of base installation finish
+ *
+ * Authors:
+ * Jiri Srain
+ *
+ * $Id: save_config_finish.ycp 36694 2007-03-05 14:17:54Z locilka $
+ *
+ */
+
+{
+
+textdomain "live-installer";
+
+import "Progress";
+import "Timezone";
+import "Keyboard";
+import "Installation";
+
+any ret = nil;
+string func = "";
+map param = $[];
+
+/* Check arguments */
+if(size(WFM::Args()) > 0 && is(WFM::Args(0), string)) {
+ func = (string)WFM::Args(0);
+ if(size(WFM::Args()) > 1 && is(WFM::Args(1), map))
+ param = (map)WFM::Args(1);
+}
+
+y2milestone ("starting save_config_finish");
+y2debug("func=%1", func);
+y2debug("param=%1", param);
+
+if (func == "Info")
+{
+ return (any)$[
+ "steps" : 1,
+ "when" : [ `installation, `update, `autoinst ],
+ ];
+}
+else if (func == "Write")
+{
+ // progress step title
+ Progress::Title (_("Saving keyboard configuration..."));
+ Keyboard::Save(true);
+ // to save also X11 configuration
+ Keyboard::xf86_update();
+ // unfortunatelly it is saved to local system instead the target, therefore need to copy
+ WFM::Execute (.local.bash, sformat ("/bin/cp /etc/X11/xorg.conf %1/etc/X11/xorg.conf", Installation::destdir));
+ Progress::NextStep ();
+ // progress step title
+ Progress::Title (_("Saving time zone..."));
+ Timezone::Save();
+
+}
+else
+{
+ y2error ("unknown function: %1", func);
+ ret = nil;
+}
+
+y2debug("ret=%1", ret);
+y2milestone("save_config_finish finished");
+return ret;
+
+
+} /* EOF */
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/src/Makefile.am new/yast2-live-installer-2.16.0/src/Makefile.am
--- old/yast2-live-installer-2.15.12/src/Makefile.am 2007-09-26 17:06:45.000000000 +0200
+++ new/yast2-live-installer-2.16.0/src/Makefile.am 2007-10-04 13:46:40.000000000 +0200
@@ -15,7 +15,9 @@
inst_live_full_proposal.ycp \
inst_live_simple_proposal.ycp \
inst_live_cleanup.ycp \
- inst_live_prepare_net_test.ycp
+ inst_live_prepare_net_test.ycp \
+ live_save_config_finish.ycp \
+ inst_live_pre-proposal.ycp
desktop_DATA = \
live-installer.desktop
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/src/Makefile.in new/yast2-live-installer-2.16.0/src/Makefile.in
--- old/yast2-live-installer-2.15.12/src/Makefile.in 2007-09-26 17:19:27.000000000 +0200
+++ new/yast2-live-installer-2.16.0/src/Makefile.in 2007-11-02 16:44:54.000000000 +0100
@@ -204,7 +204,9 @@
inst_live_full_proposal.ycp \
inst_live_simple_proposal.ycp \
inst_live_cleanup.ycp \
- inst_live_prepare_net_test.ycp
+ inst_live_prepare_net_test.ycp \
+ live_save_config_finish.ycp \
+ inst_live_pre-proposal.ycp
desktop_DATA = \
live-installer.desktop
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-live-installer-2.15.12/VERSION new/yast2-live-installer-2.16.0/VERSION
--- old/yast2-live-installer-2.15.12/VERSION 2007-09-26 17:16:47.000000000 +0200
+++ new/yast2-live-installer-2.16.0/VERSION 2007-11-02 16:44:34.000000000 +0100
@@ -1 +1 @@
-2.15.12
+2.16.0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org