Hello community,
here is the log from the commit of package yast2-country
checked in at Fri Aug 31 18:44:10 CEST 2007.
--------
--- yast2-country/yast2-country.changes 2007-08-17 15:13:07.000000000 +0200
+++ /mounts/work_src_done/STABLE/yast2-country/yast2-country.changes 2007-08-31 17:35:05.094656000 +0200
@@ -1,0 +2,6 @@
+Fri Aug 31 17:26:12 CEST 2007 - kmachalkova@suse.cz
+
+- Timezone dialog adjusted to use new ntp installation clients
+ (FaTE #302192, bugzilla #299238,#299557,#302389)
+
+-------------------------------------------------------------------
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-country.spec ++++++
--- /var/tmp/diff_new_pack.B25646/_old 2007-08-31 18:44:02.000000000 +0200
+++ /var/tmp/diff_new_pack.B25646/_new 2007-08-31 18:44:02.000000000 +0200
@@ -12,7 +12,7 @@
Name: yast2-country
Version: 2.15.18
-Release: 1
+Release: 10
License: GPL v2 or later
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
@@ -111,6 +111,9 @@
%{prefix}/share/applications/YaST2/timezone.desktop
%changelog
+* Fri Aug 31 2007 - kmachalkova@suse.cz
+- Timezone dialog adjusted to use new ntp installation clients
+ (FaTE #302192, bugzilla #299238,#299557,#302389)
* Fri Aug 17 2007 - jsuchome@suse.cz
- when non-listed locale is selected, add it to the list of
primary languages (#301019)
++++++ yast2-country-2.15.18.tar.bz2 ++++++
++++ 11667 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/configure.in new/yast2-country-2.15.18/configure.in
--- old/yast2-country-2.15.18/configure.in 2006-12-11 09:59:02.000000000 +0100
+++ new/yast2-country-2.15.18/configure.in 2007-07-27 12:20:15.000000000 +0200
@@ -1,9 +1,9 @@
dnl configure.in for yast2-country
dnl
-dnl -- This file is generated by y2autoconf 2.14.0 - DO NOT EDIT! --
+dnl -- This file is generated by y2autoconf 2.15.0 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-country, 2.15.2, http://bugs.opensuse.org/, yast2-country)
+AC_INIT(yast2-country, 2.15.13, http://bugs.opensuse.org/, yast2-country)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -17,7 +17,7 @@
AM_INIT_AUTOMAKE(tar-ustar) dnl searches for some needed programs
dnl Important YaST2 variables
-VERSION="2.15.2"
+VERSION="2.15.13"
RPMNAME="yast2-country"
MAINTAINER="Jiri Suchomel "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/language/src/modules/Language.ycp new/yast2-country-2.15.18/language/src/modules/Language.ycp
--- old/yast2-country-2.15.18/language/src/modules/Language.ycp 2007-08-17 14:34:14.000000000 +0200
+++ new/yast2-country-2.15.18/language/src/modules/Language.ycp 2007-08-31 17:26:05.000000000 +0200
@@ -6,7 +6,7 @@
* Thomas Roelz
* Maintainer: Jiri Suchomel
*
- * $Id: Language.ycp 36138 2007-02-14 13:53:58Z jsuchome $
+ * $Id: Language.ycp 40336 2007-08-17 13:13:23Z jsuchome $
*/
{
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/language/src/select_language.ycp new/yast2-country-2.15.18/language/src/select_language.ycp
--- old/yast2-country-2.15.18/language/src/select_language.ycp 2007-08-16 16:48:07.000000000 +0200
+++ new/yast2-country-2.15.18/language/src/select_language.ycp 2007-08-31 17:26:05.000000000 +0200
@@ -15,7 +15,7 @@
* Summary:
* This client shows main dialog for choosing the language.
*
- * $Id: select_language.ycp 39934 2007-08-03 11:14:11Z sh-sh-sh $
+ * $Id: select_language.ycp 40336 2007-08-17 13:13:23Z jsuchome $
*
*/
{
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/language/testsuite/tests/IncompleteTranslation.ycp new/yast2-country-2.15.18/language/testsuite/tests/IncompleteTranslation.ycp
--- old/yast2-country-2.15.18/language/testsuite/tests/IncompleteTranslation.ycp 2006-09-08 11:20:22.000000000 +0200
+++ new/yast2-country-2.15.18/language/testsuite/tests/IncompleteTranslation.ycp 2007-05-18 10:56:17.000000000 +0200
@@ -1,7 +1,7 @@
/**
* tests for Language::IncompleteTranslation
* Author: jsuchome@suse.cz
- * $Id: IncompleteTranslation.ycp 31977 2006-07-25 08:02:35Z jsuchome $
+ * $Id: IncompleteTranslation.ycp 31976 2006-07-25 08:02:24Z jsuchome $
*/
{
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/missing new/yast2-country-2.15.18/missing
--- old/yast2-country-2.15.18/missing 2006-12-11 09:59:08.000000000 +0100
+++ new/yast2-country-2.15.18/missing 2007-07-27 12:20:22.000000000 +0200
@@ -1,9 +1,9 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-scriptversion=2005-06-08.21
+scriptversion=2006-05-10.23
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
# Originally by Fran,cois Pinard , 1996.
@@ -33,6 +33,8 @@
fi
run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
@@ -44,7 +46,7 @@
msg="missing on your system"
-case "$1" in
+case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
@@ -77,6 +79,7 @@
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
@@ -106,7 +109,7 @@
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program).
-case "$1" in
+case $1 in
lex|yacc)
# Not GNU programs, they don't have --version.
;;
@@ -135,7 +138,7 @@
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
-case "$1" in
+case $1 in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
@@ -164,7 +167,7 @@
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
- case "$f" in
+ case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
@@ -192,8 +195,8 @@
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
@@ -214,25 +217,25 @@
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
- if [ ! -f y.tab.h ]; then
+ if test ! -f y.tab.h; then
echo >y.tab.h
fi
- if [ ! -f y.tab.c ]; then
+ if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
@@ -244,18 +247,18 @@
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
- if [ $# -ne 1 ]; then
+ if test $# -ne 1; then
eval LASTARG="\${$#}"
- case "$LASTARG" in
+ case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
+ if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
- if [ ! -f lex.yy.c ]; then
+ if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
@@ -267,11 +270,9 @@
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
@@ -289,11 +290,17 @@
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ file=`sed -n '
+ /^@setfilename/{
+ s/.* \([^ ]*\) *$/\1/
+ p
+ q
+ }' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
@@ -317,13 +324,13 @@
fi
firstarg="$1"
if shift; then
- case "$firstarg" in
+ case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
- case "$firstarg" in
+ case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/timezone/src/dialogs.ycp new/yast2-country-2.15.18/timezone/src/dialogs.ycp
--- old/yast2-country-2.15.18/timezone/src/dialogs.ycp 2007-07-27 13:38:38.000000000 +0200
+++ new/yast2-country-2.15.18/timezone/src/dialogs.ycp 2007-08-31 17:28:14.000000000 +0200
@@ -11,7 +11,7 @@
* Summary:
* Dialogs for timezone and time configuration.
*
- * $Id: dialogs.ycp 39743 2007-07-27 11:38:38Z jsuchome $
+ * $Id: dialogs.ycp 40656 2007-08-31 15:28:13Z kmachalkova $
*/
{
textdomain "country";
@@ -121,67 +121,28 @@
);
dt_widgets = true;
}
- list ntp_items = [];
- boolean ntp_used = Service::Enabled ("ntp") && Package::Installed ("yast2-ntp-client");
- // list of servers based on the language (got from ntp-client module)
- list ntp_items_proposed = nil;
- list ntp_items_proposal () {
- if (ntp_items_proposed == nil)
- {
- list servers = (list) WFM::CallFunction ("ntp-client_auto", [
- "GetNtpServersByCountry",
- $[ "country" : Language::GetLanguageCountry () ]
- ]);
- ntp_items_proposed = (servers == nil) ? [] : servers;
- }
- return ntp_items_proposed;
- }
-
- /**
- * get the list of ntp servers from current ntp-client instance
- */
- list get_current_ntp_settings () {
-
- list ret = [];
- map ex = (map)WFM::CallFunction ("ntp-client_auto", ["Export"]);
- if (ex == nil) return ret;
- foreach (map peer, ex["peers"]:[], {
- if (peer["type"]:"" == "server")
- ret = add (ret, peer["address"]:"");
- });
- return ret;
- }
-
- /**
- * read current NTP settings (using yast2-ntp-client)
- * and fill the list of servers
- */
- boolean read_ntp_settings () {
-
- // busy popup
- Popup::ShowFeedback ("", _("Reading NTP configuration..."));
- any read = WFM::CallFunction ("ntp-client_auto", ["Read"]);
- if (read == false)
- {
- ntp_used = false;
- ntp_items = [];
- }
- else
- {
- ntp_items = get_current_ntp_settings ();
- }
- if (ntp_used && ntp_items == [])
- ntp_items = ntp_items_proposal ();
- Popup::ClearFeedback ();
- return ntp_used;
+ void enable_disable_widgets ( boolean ntp_used) {
+ if (!dt_widgets)
+ {
+ foreach (symbol widget, [`hour, `minute, `second, `day, `month, `year],{
+ UI::ChangeWidget (`id (widget), `Enabled, !ntp_used);
+ });
+ }
+ else
+ {
+ UI::ChangeWidget (`id (`date), `Enabled, !ntp_used);
+ UI::ChangeWidget (`id (`time), `Enabled, !ntp_used);
+ }
+ UI::ChangeWidget (`id (`ntp_address), `Enabled, ntp_used);
+ UI::ChangeWidget (`id (`ntp_configure), `Enabled, ntp_used);
}
term cont = `HBox (
`RadioButtonGroup (`id (`rb), `HCenter (`VBox (
`Left (`VBox (
// radio button label (= how to setup time)
- `Left (`RadioButton (`id (`manual), `opt (`notify), _("Manually"), !ntp_used)),
+ `Left (`RadioButton (`id (`manual), `opt (`notify), _("Manually"), true)),
`VSpacing (0.5),
`HBox (
`HSpacing (3),
@@ -190,35 +151,17 @@
`VSpacing(),
`Left (dateterm)
)
- )
- )),
- `VSpacing (1),
- `Left (`VBox (
- `Left (`RadioButton (`id (`ntp), `opt (`notify),
- // radio button label
- _("Synchronize with NTP Server"), ntp_used)
),
- `VSpacing (0.5),
- `HBox (
- `HSpacing (3),
- `MinWidth (38,
- `ComboBox (`id (`ntp_address), `opt (`editable),
- // combo box label
- _("NTP Server Address"), ntp_items
- )
- ),
- `VBox (
- `Label (""),
- // push button label
- `PushButton (`id (`ntp_configure), _("Configure..."))
- )
- )
+ `VSpacing (1),
+ `ReplacePoint(`id(`rp), `Empty())
))
- )))
- );
+ ))));
Wizard::OpenAcceptDialog ();
Wizard::SetContents (_("Change Date and Time"), cont, htext, true, true);
+ Wizard::SetDesktopIcon("timezone");
+ WFM::CallFunction("ntp-client_proposal", ["CreateUI"]);
+ enable_disable_widgets(false);
if (!dt_widgets)
{
@@ -229,38 +172,17 @@
});
}
- if (ntp_used)
- {
- read_ntp_settings ();
- UI::ChangeWidget (`id (`ntp_address), `Items, ntp_items);
- }
+ boolean ntp_installed = false;
+ boolean ntp_used = false;
- void enable_disable_widgets () {
- if (!dt_widgets)
- {
- foreach (symbol widget, [`hour, `minute, `second, `day, `month, `year],{
- UI::ChangeWidget (`id (widget), `Enabled, !ntp_used);
- });
- }
- else
- {
- UI::ChangeWidget (`id (`date), `Enabled, !ntp_used);
- UI::ChangeWidget (`id (`time), `Enabled, !ntp_used);
- }
- UI::ChangeWidget (`id (`ntp_address), `Enabled, ntp_used);
- UI::ChangeWidget (`id (`ntp_configure), `Enabled, ntp_used);
- }
-
- enable_disable_widgets ();
- any ret = `cancel;
- boolean ntp_installed = false;
+ any ret = nil;
repeat
{
ret = UI::UserInput();
y2debug ("UserInput ret:%1", ret );
if (ret == `ntp || ret == `manual)
- {
- ntp_used = (ret == `ntp);
+ {
+ ntp_used = (ret == `ntp);
if (ntp_used && !Stage::initial () && !ntp_installed)
{
ntp_installed = Package::Install ("yast2-ntp-client");
@@ -271,49 +193,17 @@
UI::ChangeWidget (`id (`ntp), `Value, false);
}
}
- if (ntp_used && ntp_items == [])
+ if (ntp_used )
{
- if (!read_ntp_settings ())
- {
- UI::ChangeWidget (`id (`manual), `Value, true);
- UI::ChangeWidget (`id (`ntp), `Value, false);
- continue;
- }
- UI::ChangeWidget (`id (`ntp_address), `Items, ntp_items);
+ WFM::CallFunction("ntp-client_proposal", [ "MakeProposal",
+ $[ "country" : Language::GetLanguageCountry() ] ]);
}
- enable_disable_widgets ();
+ enable_disable_widgets (ntp_used);
}
if (ret == `ntp_configure)
{
- if (WFM::CallFunction ("ntp-client_auto", ["Change"]) != `next)
+ if (WFM::CallFunction ("ntp-client_proposal", ["AskUser"]) != `next)
continue;
- // read current settings again
- ntp_items = get_current_ntp_settings ();
- UI::ChangeWidget (`id (`ntp_address), `Items, ntp_items);
- // adapt current time after the attempt to synchronize
- val = Timezone::GetDateTimeMap();
- hour = val["hour"]:"";
- minute = val["minute"]:"";
- second = val["second"]:"";
- day = val["day"]:"";
- month = val["month"]:"";
- year = val["year"]:"";
- if (dt_widgets)
- {
- UI::ChangeWidget (`id (`date), `Value,
- sformat ("%1-%2-%3", year, month, day));
- UI::ChangeWidget (`id (`time), `Value,
- sformat ("%1:%2:%3", hour, minute, second));
- }
- else
- {
- UI::ChangeWidget (`id (`hour), `Value, hour);
- UI::ChangeWidget (`id (`minute), `Value, minute);
- UI::ChangeWidget (`id (`second), `Value, second);
- UI::ChangeWidget (`id (`day), `Value, day);
- UI::ChangeWidget (`id (`month), `Value, month);
- UI::ChangeWidget (`id (`year), `Value, year);
- }
}
if (ret == `accept && !ntp_used)
{
@@ -366,24 +256,22 @@
}
if (ret == `accept && ntp_used)
{
- // check the address validity, call ntp-client API etc.
- map ex = (map)WFM::CallFunction ("ntp-client_auto", ["Export"]);
- list peers = add (ex["peers"]:[], $[
- "address" : UI::QueryWidget (`id (`ntp_address), `Value),
- "comment" : "",
- "options" : "",
- "type" : "server",
- "initial_sync" : true,
- ]
- );
- map import_map = $[
- "peers" : peers,
- "start_at_boot" : true,
- ];
- WFM::CallFunction ("ntp-client_auto", ["Import", import_map]);
- WFM::CallFunction ("ntp-client_auto", ["Write", $[
- "restart_services": true
- ]]);
+ symbol rv = (symbol) WFM::CallFunction("ntp-client_proposal", ["Write"]);
+
+ string server = (string) UI::QueryWidget(`id(`ntp_address), `Value);
+
+ if (rv == `invalid_hostname)
+ {
+ Popup::Error( sformat("Invalid NTP server hostname %1", server) );
+ ret = `retry;
+ continue;
+ }
+ else if ( rv == `ntpdate_failed)
+ {
+ if (Popup::YesNo( sformat("'ntpdate %1' failed. Revisit NTP server configuration?", server) ))
+ ret = `retry;
+ continue;
+ }
}
}
until( ret==`accept || ret==`cancel );
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTimeMap.ycp new/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTimeMap.ycp
--- old/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTimeMap.ycp 2006-09-08 11:21:28.000000000 +0200
+++ new/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTimeMap.ycp 2007-05-18 10:56:17.000000000 +0200
@@ -2,7 +2,7 @@
* test for Timezone::GetDateTimeMap
* - check correct parsing after changed time format (bug #62312)
* Author: jsuchome@suse.cz
- * $Id: GetDateTimeMap.ycp 31664 2006-06-26 14:24:19Z jsuchome $
+ * $Id: GetDateTimeMap.ycp 31665 2006-06-26 14:24:27Z jsuchome $
*/
{
// testedfiles: Timezone.ycp
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTime.ycp new/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTime.ycp
--- old/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTime.ycp 2006-09-08 11:21:28.000000000 +0200
+++ new/yast2-country-2.15.18/timezone/testsuite/tests/GetDateTime.ycp 2007-05-18 10:56:17.000000000 +0200
@@ -1,7 +1,7 @@
/**
* tests for Timezone::GetDateTime
* Author: jsuchome@suse.cz
- * $Id: GetDateTime.ycp 31664 2006-06-26 14:24:19Z jsuchome $
+ * $Id: GetDateTime.ycp 31665 2006-06-26 14:24:27Z jsuchome $
*/
{
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org