Hello community,
here is the log from the commit of package libibumad
checked in at Thu Aug 9 16:01:15 CEST 2007.
--------
--- libibumad/libibumad.changes 2007-07-03 12:58:08.000000000 +0200
+++ /mounts/work_src_done/STABLE/libibumad/libibumad.changes 2007-08-07 12:53:14.000000000 +0200
@@ -1,0 +2,5 @@
+Tue Aug 7 12:53:05 CEST 2007 - hvogel@suse.de
+
+- Update to version 1.0.6 from OFED 1.2c
+
+-------------------------------------------------------------------
Old:
----
libibumad-1.0.5.tar.bz2
New:
----
libibumad-1.0.6.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ libibumad.spec ++++++
--- /var/tmp/diff_new_pack.m29364/_old 2007-08-09 16:00:28.000000000 +0200
+++ /var/tmp/diff_new_pack.m29364/_new 2007-08-09 16:00:28.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package libibumad (Version 1.0.5)
+# spec file for package libibumad (Version 1.0.6)
#
# Copyright (c) 2007 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -12,12 +12,12 @@
Name: libibumad
Summary: User MAD library functions on top of user MAD modules for Infiniband diagnostic and management tools
-Version: 1.0.5
+Version: 1.0.6
Release: 1
License: BSD 3-Clause, GPL v2 or later
Group: System/Libraries
Source0: %{name}-%{version}.tar.bz2
-URL: http://www.openfabrics.porg
+URL: http://www.openfabrics.org
BuildRoot: %{_tmppath}/%{name}-%{version}-build
BuildRequires: gcc-c++ libibcommon-devel libibverbs-devel
@@ -52,7 +52,6 @@
%prep
%setup -q
-./autogen.sh
%build
%configure
@@ -81,6 +80,8 @@
%_libdir/libibumad.so
%changelog
+* Tue Aug 07 2007 - hvogel@suse.de
+- Update to version 1.0.6 from OFED 1.2c
* Mon Jul 02 2007 - hvogel@suse.de
- use correct version 1.0.5 that comes with OFED 1.2
* Wed Jun 20 2007 - hvogel@suse.de
++++++ libibumad-1.0.5.tar.bz2 -> libibumad-1.0.6.tar.bz2 ++++++
++++ 41194 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/autogen.sh new/libibumad-1.0.6/autogen.sh
--- old/libibumad-1.0.5/autogen.sh 2007-07-03 12:48:39.000000000 +0200
+++ new/libibumad-1.0.6/autogen.sh 1970-01-01 01:00:00.000000000 +0100
@@ -1,11 +0,0 @@
-#! /bin/sh
-
-# create config dir if not exist
-test -d config || mkdir config
-
-set -x
-aclocal -I config
-libtoolize --force --copy
-autoheader
-automake --foreign --add-missing --copy
-autoconf
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/BUILD_ID new/libibumad-1.0.6/BUILD_ID
--- old/libibumad-1.0.5/BUILD_ID 1970-01-01 01:00:00.000000000 +0100
+++ new/libibumad-1.0.6/BUILD_ID 2007-08-05 15:04:08.000000000 +0200
@@ -0,0 +1 @@
+1.0.6
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/ChangeLog new/libibumad-1.0.6/ChangeLog
--- old/libibumad-1.0.5/ChangeLog 2007-07-03 12:48:39.000000000 +0200
+++ new/libibumad-1.0.6/ChangeLog 2007-08-05 15:01:10.000000000 +0200
@@ -1,3 +1,12 @@
+2007-06-29 Hal Rosenstock
+
+ * Release version 1.0.6
+
+2007-06-26 Michael S. Tsirkin
+
+ * include/infiniband/umad.h: Change uint to unsigned
+ for strict ANSI
+
2007-06-02 Hal Rosenstock
* Release version 1.0.5
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/config/compile new/libibumad-1.0.6/config/compile
--- old/libibumad-1.0.5/config/compile 1970-01-01 01:00:00.000000000 +0100
+++ new/libibumad-1.0.6/config/compile 2007-08-05 15:02:45.000000000 +0200
@@ -0,0 +1,142 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey .
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to or send patches to
+# .
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to .
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # So we strip `-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no `-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # `.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/config/missing new/libibumad-1.0.6/config/missing
--- old/libibumad-1.0.5/config/missing 1970-01-01 01:00:00.000000000 +0100
+++ new/libibumad-1.0.6/config/missing 2007-08-05 15:02:45.000000000 +0200
@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard , 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to ."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/config.h.in new/libibumad-1.0.6/config.h.in
--- old/libibumad-1.0.5/config.h.in 1970-01-01 01:00:00.000000000 +0100
+++ new/libibumad-1.0.6/config.h.in 2007-08-05 15:02:40.000000000 +0200
@@ -0,0 +1,98 @@
+/* config.h.in. Generated from configure.in by autoheader. */
+
+/* Define to 1 if you have the header file, and it defines `DIR'.
+ */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `ibcommon' library (-libcommon). */
+#undef HAVE_LIBIBCOMMON
+
+/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
+ to 0 otherwise. */
+#undef HAVE_MALLOC
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the header file, and it defines `DIR'. */
+#undef HAVE_NDIR_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_NETINET_IN_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the header file, and it defines `DIR'.
+ */
+#undef HAVE_SYS_DIR_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_IOCTL_H
+
+/* Define to 1 if you have the header file, and it defines `DIR'.
+ */
+#undef HAVE_SYS_NDIR_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_UNISTD_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+ calls it, or to nothing if 'inline' is not supported under any name. */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to rpl_malloc if the replacement function should be used. */
+#undef malloc
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/configure.in new/libibumad-1.0.6/configure.in
--- old/libibumad-1.0.5/configure.in 2007-07-03 12:48:39.000000000 +0200
+++ new/libibumad-1.0.6/configure.in 2007-08-05 15:01:10.000000000 +0200
@@ -1,7 +1,7 @@
dnl Process this file with autoconf to produce a configure script.
AC_PREREQ(2.57)
-AC_INIT(libibumad, 1.0.5, general@lists.openfabrics.org)
+AC_INIT(libibumad, 1.0.6, general@lists.openfabrics.org)
AC_CONFIG_SRCDIR([src/umad.c])
AC_CONFIG_AUX_DIR(config)
AM_CONFIG_HEADER(config.h)
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/include/infiniband/umad.h new/libibumad-1.0.6/include/infiniband/umad.h
--- old/libibumad-1.0.5/include/infiniband/umad.h 2007-07-03 12:48:39.000000000 +0200
+++ new/libibumad-1.0.6/include/infiniband/umad.h 2007-08-05 15:01:10.000000000 +0200
@@ -120,13 +120,13 @@
typedef struct umad_port {
char ca_name[UMAD_CA_NAME_LEN];
int portnum;
- uint base_lid;
- uint lmc;
- uint sm_lid;
- uint sm_sl;
- uint state;
- uint phys_state;
- uint rate;
+ unsigned base_lid;
+ unsigned lmc;
+ unsigned sm_lid;
+ unsigned sm_sl;
+ unsigned state;
+ unsigned phys_state;
+ unsigned rate;
uint64_t capmask;
uint64_t gid_prefix;
uint64_t port_guid;
@@ -134,7 +134,7 @@
typedef struct umad_ca {
char ca_name[UMAD_CA_NAME_LEN];
- uint node_type;
+ unsigned node_type;
int numports;
char fw_ver[20];
char ca_type[40];
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/libibumad.spec new/libibumad-1.0.6/libibumad.spec
--- old/libibumad-1.0.5/libibumad.spec 1970-01-01 01:00:00.000000000 +0100
+++ new/libibumad-1.0.6/libibumad.spec 2007-08-05 15:03:08.000000000 +0200
@@ -0,0 +1,55 @@
+
+%define ver 1.0.6
+%define RELEASE 1
+%define rel %{?CUSTOM_RELEASE} %{!?CUSTOM_RELEASE:%RELEASE}
+
+Summary: OpenIB InfiniBand Management and Diagnostic Tools
+Name: libibumad
+Version: %ver
+Release: %rel%{?dist}
+License: GPL/BSD
+Group: System Environment/Libraries
+BuildRoot: %{_tmppath}/%{name}-%{version}-root
+Source: http://openib.org/downloads/%{name}-%{version}.tar.gz
+Url: http://openib.org/
+BuildRequires: libibcommon-devel
+
+%description
+libibumad provides the user MAD library functions which sit on top of
+the user MAD modules in the kernel. These are used by the IB diagnostic
+and management tools, including OpenSM.
+
+%package devel
+Summary: Development files for the libibumad library
+Group: System Environment/Libraries
+Requires: %{name} = %{version}-%{release} libibcommon-devel
+
+%description devel
+Development files for the libibumad library.
+
+%prep
+%setup -q
+
+%build
+%configure
+make
+
+%install
+make DESTDIR=${RPM_BUILD_ROOT} install
+# remove unpackaged files from the buildroot
+rm -f $RPM_BUILD_ROOT%{_libdir}/*.la
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%{_libdir}/libibumad*.so.*
+%{_mandir}/man3/*
+%doc AUTHORS COPYING ChangeLog
+
+%files devel
+%defattr(-,root,root)
+%{_libdir}/libibumad.a
+%{_libdir}/libibumad.so
+%{_includedir}/infiniband/*.h
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/Makefile.orig new/libibumad-1.0.6/Makefile.orig
--- old/libibumad-1.0.5/Makefile.orig 2007-07-03 12:48:39.000000000 +0200
+++ new/libibumad-1.0.6/Makefile.orig 1970-01-01 01:00:00.000000000 +0100
@@ -1,19 +0,0 @@
-OPENIB_ROOT=..
-include $(OPENIB_ROOT)/make.inc
-
-SRCS=$(wildcard src/*.c)
-LIB_OBJS=$(SRCS:.c=.lo)
-LIB_HDRS=$(wildcard include/infiniband/*.h) ../libibcommon/include/infiniband/common.h
-
-PUBLIC_HEADERS=include/infiniband/umad.h
-
-#LIB_STATIC_TARGET=libibumad.a
-LIB_SO_TARGET=libibumad.la
-
-EXTRA_CLEAN=
-
-all: $(LIB_SO_TARGET)
-
-install: lib_install public_headers_install
-
-include $(OPENIB_ROOT)/make.rules
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/libibumad-1.0.5/man/umad_set_pkey.3 new/libibumad-1.0.6/man/umad_set_pkey.3
--- old/libibumad-1.0.5/man/umad_set_pkey.3 2007-07-03 12:48:39.000000000 +0200
+++ new/libibumad-1.0.6/man/umad_set_pkey.3 1970-01-01 01:00:00.000000000 +0100
@@ -1,24 +0,0 @@
-.\" -*- nroff -*-
-.\"
-.TH UMAD_SET_PKEY 3 "May 17, 2007" "OpenIB" "OpenIB Programmer\'s Manual"
-.SH "NAME"
-umad_set_pkey \- set pkey within umad buffer
-.SH "SYNOPSIS"
-.nf
-.B #include
-.sp
-.BI "int umad_set_pkey(void " "*umad" ", int " "pkey");
-.fi
-.SH "DESCRIPTION"
-.B umad_set_pkey()
-sets the pkey within the specified
-.I umad\fR
-buffer.
-.SH "RETURN VALUE"
-.B umad_set_pkey()
-returns 0 on success, and a negative value on an error.
-.SH "KNOWN BUGS"
-Not implemented.
-.SH "AUTHOR"
-.TP
-Hal Rosenstock
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit+unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit+help@opensuse.org