Mailinglist Archive: opensuse-commit (1082 mails)
| < Previous | Next > |
commit sensors
- From: root@xxxxxxxxxxxxxxx (h_root)
- Date: Mon, 28 May 2007 15:04:56 +0200
- Message-id: <20070528130456.AE32967816D@xxxxxxxxxxxxxxx>
Hello community,
here is the log from the commit of package sensors
checked in at Mon May 28 15:04:56 CEST 2007.
--------
--- sensors/sensors.changes 2007-05-09 10:37:40.000000000 +0200
+++ /mounts/work_src_done/STABLE/sensors/sensors.changes 2007-05-28 13:40:59.612579000 +0200
@@ -1,0 +2,7 @@
+Mon May 28 13:43:34 CEST 2007 - jdelvare@xxxxxxx
+
+- Fix two rpmlint errors: /etc/init.d/lm_sensors shouldn't be
+ marked as a config file, and was missing a Short-Description
+ tag.
+
+-------------------------------------------------------------------
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ sensors.spec ++++++
--- /var/tmp/diff_new_pack.X26477/_old 2007-05-28 15:04:46.000000000 +0200
+++ /var/tmp/diff_new_pack.X26477/_new 2007-05-28 15:04:47.000000000 +0200
@@ -14,7 +14,7 @@
BuildRequires: bison flex rrdtool sysfsutils udev
URL: http://www.lm-sensors.org/
Version: 2.10.3
-Release: 10
+Release: 19
Summary: Hardware health monitoring for Linux
License: GNU General Public License (GPL)
Group: System/Monitoring
@@ -92,7 +92,7 @@
%files
%defattr(-,root,root)
%config(noreplace) /etc/sensors.conf
-%config /etc/init.d/lm_sensors
+/etc/init.d/lm_sensors
%attr(660, root, root) %dev(c, 89, 0) /lib/udev/devices/i2c-0
/usr/bin/*
/usr/sbin/*
@@ -106,6 +106,10 @@
%doc /usr/share/man/man8/*.8.gz
%changelog
+* Mon May 28 2007 - jdelvare@xxxxxxx
+- Fix two rpmlint errors: /etc/init.d/lm_sensors shouldn't be
+ marked as a config file, and was missing a Short-Description
+ tag.
* Wed May 09 2007 - jdelvare@xxxxxxx
- lm_sensors-no-xeon-script.patch: The decode-xeon.pl script is
outdated. It was never ported to work with 2.6 kernels, so it is
++++++ lm_sensors-2.10.3.dif ++++++
--- /var/tmp/diff_new_pack.X26477/_old 2007-05-28 15:04:47.000000000 +0200
+++ /var/tmp/diff_new_pack.X26477/_new 2007-05-28 15:04:47.000000000 +0200
@@ -1,5 +1,5 @@
---- Makefile
-+++ Makefile 2006-11-10 15:39:03.000000000 +0100
+--- Makefile.orig
++++ Makefile
@@ -45,8 +45,8 @@ LINUX_HEADERS := $(LINUX)/include
# may be used mistakenly. Note: This should point to the directory
# *above* the linux/ subdirectory, so to /usr/local/include in the
@@ -47,8 +47,8 @@
endif
ifeq ($(WARN),1)
---- prog/detect/sensors-detect
-+++ prog/detect/sensors-detect 2006-11-10 17:45:13.000000000 +0100
+--- prog/detect/sensors-detect.orig
++++ prog/detect/sensors-detect
@@ -2147,7 +2147,9 @@ sub initialize_conf
}
}
@@ -107,8 +107,8 @@
}
}
---- prog/init/README
-+++ prog/init/README 2006-02-28 13:05:01.000000000 +0100
+--- prog/init/README.orig
++++ prog/init/README
@@ -10,7 +10,7 @@ The script lm_sensors.init is a nice sta
On RH and other RH-based systems (MDK, notably) use this sort of startup
mechanism (i.e. SVR4-based), as opposed to the everything-in-one-script
@@ -131,9 +131,9 @@
For more information see the top of the file.
To configure this service one should put appropriate "alias i2c-bus-0 xxx"
---- prog/init/lm_sensors.init.suse
-+++ prog/init/lm_sensors.init.suse 2006-02-28 13:05:01.000000000 +0100
-@@ -1,19 +1,14 @@
+--- prog/init/lm_sensors.init.suse.orig
++++ prog/init/lm_sensors.init.suse
+@@ -1,19 +1,15 @@
#!/bin/sh
#
### BEGIN INIT INFO
@@ -151,6 +151,7 @@
+# Required-Stop: $remote_fs
+# Default-Start: 2 3 5
+# Default-Stop:
++# Short-Description: Load and configure hardware monitoring drivers
+# Description: sensors is used for monitoring motherboard sensor values.
+# Config file is /etc/sysconfig/lm_sensors
### END INIT INFO
@@ -160,7 +161,7 @@
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-@@ -40,115 +35,91 @@
+@@ -40,115 +36,91 @@
# MODULE_1, MODULE_2, MODULE_3, etc.
# If sensors isn't supported by the kernel, try loading the module...
@@ -321,7 +322,7 @@
# See how we were called.
case "$1" in
start)
-@@ -163,12 +134,12 @@ case "$1" in
+@@ -163,12 +135,12 @@ case "$1" in
restart|reload)
restart
;;
@@ -337,9 +338,9 @@
-exit $RETVAL
+rc_exit
---- prog/init/sensord.init
-+++ prog/init/sensord.init 2006-02-28 13:05:01.000000000 +0100
-@@ -1,130 +1,83 @@
+--- prog/init/sensord.init.orig
++++ prog/init/sensord.init
+@@ -1,130 +1,84 @@
-#!@BASH@
+#!/bin/bash
#
@@ -372,6 +373,7 @@
+# Required-Stop: $remote_fs
+# Default-Start: 2 3 5
+# Default-Stop:
++# Short-Description: Hardware monitoring daemon
+# Description: This shell script takes care of starting and stopping
+# sensord, the lm_sensors hardware health monitoring daemon.
+### END INIT INFO
@@ -508,7 +510,7 @@
}
# See how we were called.
-@@ -135,9 +88,6 @@ case "$1" in
+@@ -135,9 +89,6 @@ case "$1" in
stop)
stop
;;
@@ -518,7 +520,7 @@
restart)
stop
start
-@@ -145,11 +95,11 @@ case "$1" in
+@@ -145,11 +96,11 @@ case "$1" in
reload)
reload
;;
@@ -532,8 +534,8 @@
exit 1
;;
esac
---- prog/pwm/fancontrol
-+++ prog/pwm/fancontrol 2006-02-28 13:05:01.000000000 +0100
+--- prog/pwm/fancontrol.orig
++++ prog/pwm/fancontrol
@@ -188,10 +188,10 @@ function restorefans()
do
pwmo=${AFCPWM[$fcvcount]}
@@ -583,8 +585,8 @@
done
# some old stuff/missing features, will clean this up soon
---- prog/pwm/pwmconfig
-+++ prog/pwm/pwmconfig 2006-02-28 13:05:01.000000000 +0100
+--- prog/pwm/pwmconfig.orig
++++ prog/pwm/pwmconfig
@@ -248,6 +248,9 @@ echo
PLOTTER=gnuplot
STEP=15
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-commit+help@xxxxxxxxxxxx
| < Previous | Next > |