Hello community,
here is the log from the commit of package yast2-update
checked in at Thu Jun 8 15:18:25 CEST 2006.
--------
--- yast2-update/yast2-update.changes 2006-05-29 13:24:57.000000000 +0200
+++ yast2-update/yast2-update.changes 2006-06-08 13:10:28.000000000 +0200
@@ -1,0 +2,12 @@
+Thu Jun 8 12:48:39 CEST 2006 - jsrain@suse.cz
+
+- fixed "Reset to Default" function for SW selection (#177469)
+- 2.13.32
+
+-------------------------------------------------------------------
+Wed Jun 7 09:27:17 CEST 2006 - jsrain@suse.cz
+
+- updated HTTP link to support portal (#180900)
+- 2.13.31
+
+-------------------------------------------------------------------
Old:
----
yast2-update-2.13.30.tar.bz2
New:
----
yast2-update-2.13.32.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-update.spec ++++++
--- /var/tmp/diff_new_pack.cmFTZv/_old 2006-06-08 15:18:09.000000000 +0200
+++ /var/tmp/diff_new_pack.cmFTZv/_new 2006-06-08 15:18:09.000000000 +0200
@@ -1,5 +1,5 @@
#
-# spec file for package yast2-update (Version 2.13.30)
+# spec file for package yast2-update (Version 2.13.32)
#
# Copyright (c) 2006 SUSE LINUX Products GmbH, Nuernberg, Germany.
# This file and all modifications and additions to the pristine
@@ -11,12 +11,12 @@
# norootforbuild
Name: yast2-update
-Version: 2.13.30
+Version: 2.13.32
Release: 1
License: GPL
Group: System/YaST
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-update-2.13.30.tar.bz2
+Source0: yast2-update-2.13.32.tar.bz2
prefix: /usr
BuildRequires: docbook-xsl-stylesheets doxygen libxslt perl-XML-Writer sgml-skel update-desktop-files yast2 yast2-bootloader yast2-devtools yast2-mouse yast2-packager yast2-testsuite yast2-xml
Requires: yast2 yast2-installation yast2-storage yast2-packager
@@ -39,7 +39,7 @@
Arvin Schnell
%prep
-%setup -n yast2-update-2.13.30
+%setup -n yast2-update-2.13.32
%build
%{prefix}/bin/y2tool y2autoconf
@@ -74,6 +74,12 @@
%doc %{prefix}/share/doc/packages/yast2-update
%changelog -n yast2-update
+* Thu Jun 08 2006 - jsrain@suse.cz
+- fixed "Reset to Default" function for SW selection (#177469)
+- 2.13.32
+* Wed Jun 07 2006 - jsrain@suse.cz
+- updated HTTP link to support portal (#180900)
+- 2.13.31
* Mon May 29 2006 - jsrain@suse.cz
- display all products to update in proposal (#170233)
- 2.13.30
++++++ yast2-update-2.13.30.tar.bz2 -> yast2-update-2.13.32.tar.bz2 ++++++
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-update-2.13.30/VERSION new/yast2-update-2.13.32/VERSION
--- old/yast2-update-2.13.30/VERSION 2006-05-29 12:52:31.000000000 +0200
+++ new/yast2-update-2.13.32/VERSION 2006-06-08 12:58:14.000000000 +0200
@@ -1 +1 @@
-2.13.30
+2.13.32
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-update-2.13.30/configure new/yast2-update-2.13.32/configure
--- old/yast2-update-2.13.30/configure 2006-05-29 13:23:53.000000000 +0200
+++ new/yast2-update-2.13.32/configure 2006-06-08 13:09:23.000000000 +0200
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for yast2-update 2.13.30.
+# Generated by GNU Autoconf 2.59 for yast2-update 2.13.32.
#
# Report bugs to http://bugs.opensuse.org/.
#
@@ -269,8 +269,8 @@
# Identity of this package.
PACKAGE_NAME='yast2-update'
PACKAGE_TARNAME='yast2-update'
-PACKAGE_VERSION='2.13.30'
-PACKAGE_STRING='yast2-update 2.13.30'
+PACKAGE_VERSION='2.13.32'
+PACKAGE_STRING='yast2-update 2.13.32'
PACKAGE_BUGREPORT='http://bugs.opensuse.org/'
ac_unique_file="RPMNAME"
@@ -728,7 +728,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures yast2-update 2.13.30 to adapt to many kinds of systems.
+\`configure' configures yast2-update 2.13.32 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -795,7 +795,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of yast2-update 2.13.30:";;
+ short | recursive ) echo "Configuration of yast2-update 2.13.32:";;
esac
cat <<\_ACEOF
@@ -908,7 +908,7 @@
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
-yast2-update configure 2.13.30
+yast2-update configure 2.13.32
generated by GNU Autoconf 2.59
Copyright (C) 2003 Free Software Foundation, Inc.
@@ -922,7 +922,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by yast2-update $as_me 2.13.30, which was
+It was created by yast2-update $as_me 2.13.32, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ $0 $@
@@ -1652,7 +1652,7 @@
# Define the identity of the package.
PACKAGE='yast2-update'
- VERSION='2.13.30'
+ VERSION='2.13.32'
cat >>confdefs.h <<_ACEOF
@@ -1863,7 +1863,7 @@
-VERSION="2.13.30"
+VERSION="2.13.32"
RPMNAME="yast2-update"
MAINTAINER="Jiri Srain "
@@ -2695,7 +2695,7 @@
} >&5
cat >&5 <<_CSEOF
-This file was extended by yast2-update $as_me 2.13.30, which was
+This file was extended by yast2-update $as_me 2.13.32, which was
generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -2750,7 +2750,7 @@
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-yast2-update config.status 2.13.30
+yast2-update config.status 2.13.32
configured by $0, generated by GNU Autoconf 2.59,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-update-2.13.30/configure.in new/yast2-update-2.13.32/configure.in
--- old/yast2-update-2.13.30/configure.in 2006-05-29 13:23:47.000000000 +0200
+++ new/yast2-update-2.13.32/configure.in 2006-06-08 13:09:03.000000000 +0200
@@ -3,7 +3,7 @@
dnl -- This file is generated by y2autoconf 2.13.18 - DO NOT EDIT! --
dnl (edit configure.in.in instead)
-AC_INIT(yast2-update, 2.13.30, http://bugs.opensuse.org/, yast2-update)
+AC_INIT(yast2-update, 2.13.32, http://bugs.opensuse.org/, yast2-update)
dnl Check for presence of file 'RPMNAME'
AC_CONFIG_SRCDIR([RPMNAME])
@@ -17,7 +17,7 @@
AM_INIT_AUTOMAKE(tar-ustar) dnl searches for some needed programs
dnl Important YaST2 variables
-VERSION="2.13.30"
+VERSION="2.13.32"
RPMNAME="yast2-update"
MAINTAINER="Jiri Srain "
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-update-2.13.30/src/clients/update_proposal.ycp new/yast2-update-2.13.32/src/clients/update_proposal.ycp
--- old/yast2-update-2.13.30/src/clients/update_proposal.ycp 2006-05-29 12:36:02.000000000 +0200
+++ new/yast2-update-2.13.32/src/clients/update_proposal.ycp 2006-06-08 12:38:47.000000000 +0200
@@ -235,7 +235,7 @@
if (force_reset)
{
Update::Reset ();
-
+ Packages::Reset ([`product]);
Update::did_init1 = false;
}
diff -urN --exclude=CVS --exclude=.cvsignore --exclude=.svn --exclude=.svnignore old/yast2-update-2.13.30/src/modules/RootPart.ycp new/yast2-update-2.13.32/src/modules/RootPart.ycp
--- old/yast2-update-2.13.30/src/modules/RootPart.ycp 2006-05-03 07:25:49.000000000 +0200
+++ new/yast2-update-2.13.32/src/modules/RootPart.ycp 2006-06-07 09:28:03.000000000 +0200
@@ -6,7 +6,7 @@
* Purpose: Responsible for searching of root partitions and
* mounting of target partitions.
*
- * $Id: RootPart.ycp 30332 2006-04-21 09:15:51Z locilka $
+ * $Id: RootPart.ycp 31354 2006-06-07 07:27:58Z jsrain $
*/
{
module "RootPart";
@@ -81,7 +81,8 @@
* Link to SDB article concerning renaming of devices.
*/
string sdb = sformat (_("See the SBD article at %1 for details
-about how to solve this problem."), "http://portal.suse.com/sdb/en/2003/03/fhassel_update_not_possible.html");
+about how to solve this problem."),
+"http://support.novell.com/techcenter/sdb/en/2003/03/fhassel_update_not_possi...");
/**
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remember to have fun...
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-commit-unsubscribe@opensuse.org
For additional commands, e-mail: opensuse-commit-help@opensuse.org