April 2018 - openSUSE Build Service - openSUSE Mailing Lists

[opensuse-buildservice] OBS Appliance - Unable to Update
by Khalil Graves 15 Apr '19

15 Apr '19

I am running OBS Appliance 2.8.2 on VMware ESX. When the appliance boots I get an error "Failed to start LSB: Finds the storage device to be used for OBS server and/or worker." I have included a dump of systemctl status obsstoagesetup.service below. I Just want to confirm if this is normal or should be addressed. I also attempted and update of a clone of my appliance via zypper but 2 GB root drive is not sufficient for upgrades. Update begins but end with "Error Code: Write Error". I checked root drive and it was up to 100% utilization from 93% prior to update. I decided to install latest version of OBS appliance over existing install. New appliance adopts my old setting but now I am getting and error on boot "Failed to start LSB: open build service source service server." In addition I am unable to build rpms in this current state. Not sure what to do next to get the cloned appliance to build a package. SYSTEMCTL status obsstoragesetup.service obsstoragesetup.service - LSB: Finds the storage device to be used for OBS server and/or worker Loaded: loaded (/etc/init.d/obsstoragesetup; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2018-03-06 18:44:59 UTC; 16min ago Docs: man:systemd-sysv-generator(8) Process: 1365 ExecStart=/etc/init.d/obsstoragesetup start (code=exited, status=1/FAILURE) Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_SERVER_SIZE=38912 Mar 06 18:44:59 linux obsstoragesetup[1365]: TOTAL_SWAP_SIZE=1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE = 12284 - 38912 - 25600 - 1024 Mar 06 18:44:59 linux obsstoragesetup[1365]: FINAL_VG_SIZE=-53252 Mar 06 18:44:59 linux obsstoragesetup[1365]: OBS_WORKER_ROOT_SIZE=-26626 Mar 06 18:44:59 linux obsstoragesetup[1365]: MIN_WORKER_ROOT_SIZE=4096 Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Control process exited, code=exited status=1 Mar 06 18:44:59 linux systemd[1]: Failed to start LSB: Finds the storage device to be used for OBS server and/or worker. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Unit entered failed state. Mar 06 18:44:59 linux systemd[1]: obsstoragesetup.service: Failed with result 'exit-code'. SYSTEMCTL status obsservice.service obsservice.service - LSB: open build service source service server Loaded: loaded (/etc/init.d/obsservice; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Fri 2018-03-09 11:59:39 UTC; 3min 34s ago Docs: man:systemd-sysv-generator(8) Process: 1761 ExecStart=/etc/init.d/obsservice start (code=exited, status=7) Mar 09 11:59:38 linux systemd[1]: Starting LSB: open build service source service server... Mar 09 11:59:39 linux startproc[1788]: startproc: exit status of parent of /usr/lib/obs/server/bs_service: 13 Mar 09 11:59:39 linux obsservice[1761]: Initializing obsservice..failed Mar 09 11:59:39 linux systemd[1]: obsservice.service: Control process exited, code=exited status=7 Mar 09 11:59:39 linux systemd[1]: Failed to start LSB: open build service source service server. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Unit entered failed state. Mar 09 11:59:39 linux systemd[1]: obsservice.service: Failed with result 'exit-code'. '. -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] tumbleweed refreshes since [18-Aug-2017] and [hosts unreachable ] on [ http://ftp5.gwdg.de and http://download.opensuse.org ]
by doiggl＠velocitynet.com.au 09 Aug '18

09 Aug '18

Hello, Hosts http://ftp5.gwdg.de and http://download.opensuse.org unreachable tumbleweed refreshes since [18-Aug-2017] and cannot get to [ http://ftp5.gwdg.de or http://download.opensuse.org] I tried following: [no response from] # ping http://download.opensuse.org ping: unknown host http://download.opensuse.org # ping http://ftp5.gwdg.de ping: unknown host http://ftp5.gwdg.de http://ftp.gwdg.de/pub/opensuse/tumbleweed/repo/oss/suse/repodata ping http://download.opensuse.org ping: unknown host http://download.opensuse.org -I tried to ping google.com -seems ok # ping google.com PING google.com (172.217.25.142) 56(84) bytes of data. 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=1 ttl=52 time=19.4 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=2 ttl=52 time=19.8 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=3 ttl=52 time=19.9 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=4 ttl=52 time=20.1 ms 64 bytes from syd15s03-in-f14.1e100.net (172.217.25.142): icmp_seq=5 ttl=52 time=19.5 ms ^C --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4005ms rtt min/avg/max/mdev = 19.480/19.790/20.153/0.287 ms Also: Are there any updates to tumbleweed since 18-Aug-2017 I do not see any updates on mirrors since then. Tried mirrors on: [has date details on] http://sfo-korg-mirror.kernel.org/opensuse/tumbleweed/repo/oss/suse/repodat… [local time is] # date Mon Aug 21 15:00:25 EST 2017 Cheers --Glenn -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4

[opensuse-buildservice] Keys missing for Fedora 25/26/27 and Rawhide
by Johannes Kastl 24 Jun '18

24 Jun '18

Hi guys, can it be that the public keys for Fedora 25/26/27 and Rawhide are not setup correctly on the OBS? I get "public key not available" errors when building locally. Not sure if this is a local issue or to be fixed on the OBS, because I find mails stating both... Kind Regards, Johannes

6 10

[opensuse-buildservice] forcing build-compare after pkg build
by Olaf Hering 28 May '18

28 May '18

Is there a way to force the usage of build-compare for all pkgs in a prj? According to the buildlog build-compare gets installed, but at the end of the build it is not used. That behavior is probably cool for bootstrap, but bad for everything else. Olaf

3 8

[opensuse-buildservice] Building with EPEL packages
by David Adam 19 May '18

19 May '18

Hi, Is there any way to build RedHat/CentOS packages with build dependencies pulled in from EPEL on the openSUSE OBS? I see the answer has been no in the past [1][2][3][4], but in 2014 there was some suggestion that the Download-on-Demand support might make this easier. The reason I'm not just copying the SRPMs and rebuilding them is that the available version of CMake requires a newer CMake than is available in RHEL/CentOS 5/6 to build, so I haven't worked how to bootstrap it properly yet - perhaps I will need an intermediate version from an older release of EPEL. Thanks David Adam zanchey(a)ucc.gu.uwa.edu.au [1]: https://forums.opensuse.org/showthread.php/522009-How-to-give-CentOS-builds… [2]: https://forums.opensuse.org/showthread.php/472286-Adding-External-Build-Dep… [3]: http://comments.gmane.org/gmane.linux.suse.opensuse.buildservice/21414 [4]: https://lists.opensuse.org/opensuse-buildservice/2011-11/msg00142.html -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] how to get a copy of deleted packages?
by Olaf Hering 30 Apr '18

30 Apr '18

How does one get a copy of a deleted package? For owned projects 'undelete' would work, for foreign project it does not. 'osc log' is apparently capable of working with a deleted package, while checkout and copypac just fail. Olaf

3 5

[opensuse-buildservice] Setting up "branches" projects so they are not deleted after SRs are accepted
by Johannes Kastl 30 Apr '18

30 Apr '18

Hi guys, I remember someone describing how to do this on the list, but I cannot find it for the life of me. I think there was a way to keep "branches"-subprojects, that are automatically created by OBS when doing "osc branch foo/bar". But they are also deleted when the only package in there is being submitted and the SR is accepted. Am I remembering this right? Is there a way to achieve that? Or is my memory playing tricks on me? Kind Regards Johannes

4 7

[opensuse-buildservice] No obs output since 20180319 for armv7 tumbleweed
by Frank Kunz 27 Apr '18

27 Apr '18

Hello, It seems that since 20180319 the armv7 remaining jobs were burn down twice (16.4. and 22.4.) and the workers became idle at that time. But there was nothing released to the repos. So the latest release was 20180319. There is also a job hanging since more than 20 days due to a kernel crash of the build host: https://build.opensuse.org/package/live_build_log/hamradio/conlogv/openSUSE… Can some admin please check this? Br, Frank -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

1 0

[opensuse-buildservice] Since around Easter: OBS publishes broken URL to Docker images
by Ralf Lang 27 Apr '18

27 Apr '18

Since around easter, when I build a docker image, instead of the image file, I get a new file Name https://download.opensuse.org/repositories/isv:/B1-Systems:/Horde5:/opensus… Content Container can be pulled via: docker pull docker://https://obs-registry.obsmgmt.opensuse.org:444/isv/b1-systems/horde5/opensuse-appliance/images/x86_64/horde5-developer:latest Web Searching around, I did not find any docs related to this change (may have used the wrong terms though). The published URL looks broken, but even several mutations of this string did not yield anything. Can you point me to existing docs or bug reports which I can watch? Can I somehow directly access the container file like before? Regards Ralf -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

2 4

[opensuse-buildservice] zombie packages or how to *really* clean up?
by Detlef Steuer 20 Apr '18

20 Apr '18

Hi! I'm experimenting with mass producing R packages for opensuse using some scripts. Therefore I set up a test project home:dsteuer:CRANtest . Experiments work ok so far, but if I have to start from scratch for a package there are problems I don't understand. A current package with problems is "abe" in OBS it is called "R-abe". It worked *once* to put it into the OBS. Then I wanted to test my script and tried to delete it from OBS. I did: osc delete R-abe checked in the webinterface and it was gone there. I now can't (how I expected) osc co R-abe any longer without an error: steuer@gaia:~/OBS/home:dsteuer:CRANtest> osc co R-abe Server returned an error: HTTP Error 404: Not Found Error getting meta for project 'home%3Adsteuer%3ACRANtest' package 'R-abe' When I try steuer@gaia:~/OBS/home:dsteuer:CRANtest> osc rdelete R-abe I get steuer@gaia:~/OBS/home:dsteuer:CRANtest> osc rdelete R-abe Waiting for Emacs... Server returned an error: HTTP Error 404: Not Found R-abe So the package is somehow gone, but somehow still there. As probably expected it is possible to do osc mkpac R-abe (the directory is created and empty) but copying files there and than osc addremove osc ci results in steuer@gaia:~/OBS/home:dsteuer:CRANtest/R-abe> osc ci Deleting R-abe Server returned an error: HTTP Error 404: Not Found home:dsteuer:CRANtest/R-abe Why that Deleting line? My questions now: How to clean up the test project? (I can start over, but there must be a proper way.) There is a handful of packages with that problem. What is the correct dance of commands to reliably remove a package from a project such that it can be recreated later. Thx Detlef -- 'People who say "I have nothing to hide" misunderstand the purpose of surveillance. It was never about privacy. It's about power.' E. Snowden -- To unsubscribe, e-mail: opensuse-buildservice+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-buildservice+owner(a)opensuse.org

3 4