http://bugzilla.opensuse.org/show_bug.cgi?id=928394 Takashi Iwai <tiwai@suse.com> changed: What |Removed |Added ---------------------------------------------------------------------------- Flags|needinfo?(tiwai@suse.com) | --- Comment #31 from Takashi Iwai <tiwai@suse.com> --- OK, now it's confirmed that the jack detection really doesn't work. Reverting back is no solution. The root cause is that your BIOS declares that the headphone jack is detectable although apparently it's not. Instead, a possible workaround is to override the BIOS setup in the driver level as if there is no jack detection possibility. Try the following: 1. Create a file containing the lines below in /lib/firmware/alsa/nojack via an editor (do it as root): [codec] 0x10ec0888 0x104382fe 0 [hint] jack_detect = no 2. Add a module option to snd-hda-intel driver; e.g. create a file /etc/modprobe.d/50-jack.conf containing the following line (again do it as root): options snd-hda-intel patch=alsa/nojack 3. Reload sound modules or reboot. With this setup, the jack detection on your system is suppressed, and PA won't care about the jack detection. You'd need to choose the output manually in the mixer setup (PA lets you choose different output routes), but it's no longer dependent on the jack status. In the worst case, you might need to run once like amixer -c0 set Headphone unmute 100% -- You are receiving this mail because: You are on the CC list for the bug.