https://bugzilla.novell.com/show_bug.cgi?id=721872
https://bugzilla.novell.com/show_bug.cgi?id=721872#c3
Bruno Friedmann changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |bruno@ioda-net.ch
--- Comment #3 from Bruno Friedmann 2011-12-18 13:38:06 UTC ---
On 12.1 there's more than just a package trouble with DSL connection.
Okay you can create the first dsl (dsl0)+provider0 but you can't edit it again
YaST2 didn't find it again, and ask you to recreate the same ?
Next point, if the interface eth linked to the dsl connection is not setup with
an ip ppp failed with network is down ?
Uh was not the case in 11.3 & 11.4
a working 11.3 look like this
cat ifcfg-dsl0
BOOTPROTO='none'
DEVICE='eth0'
MODEM_IP='212.90.197.226'
NAME='Connexion DSL'
PPPD_OPTIONS=''
PPPMODE='pppoe'
PROVIDER='provider0'
STARTMODE='auto'
UNIQUE=''
USERCONTROL='no'
VPIVCI=''
UDI=''
totem:/etc/sysconfig/network # cat ifcfg-eth0
BOOTPROTO='static'
STARTMODE='auto'
NAME='RTL8111/8168B PCI Express Gigabit Ethernet controller'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NETWORK=''
REMOTE_IPADDR=''
USERCONTROL='no'
for having it working on 12.1 you need
cat ifcfg-eth1
BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='10.0.0.138/24'
MTU='1500'
NAME='MCP55 Ethernet'
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no'
yoda:/etc/sysconfig/network # cat ifcfg-dsl0
BOOTPROTO='none'
DEVICE='eth1'
MODEM_IP='10.0.0.138'
NAME='DSL Connection'
PPPD_OPTIONS=''
PPPMODE='pppoe'
PROVIDER='provider0'
STARTMODE='auto'
UDI=''
USERCONTROL='no'
VPIVCI=''
Just to inform the state : not working at all
(especially if you put ipv6 on : which should work !)
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.